MBR15100CT

MBR1535CT - MBR15150CT 15.0 AMPS. Schottky Barrier Rectifiers TO-220AB Features Plastic material used carries Underwriters Laboratory Classifications 94V-0 Metal silicon junction, majority carrier conduction Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Guardring for overvoltage protection High temperature soldering guaranteed: 260oC/10 seconds,0.25”(6.35mm)from case Mechanical Data Cases: JEDEC TO-220AB molded plastic body Terminals: Pure tin plated, lead free. solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting position: Any Mounting torque: 5 in. - lbs. max W eight: 0.08 ounce, 2.24 grams Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number MBR MBR MBR MBR Symbol 1MBR 1545CT 1MBR 1560CT 1MBR 15100CT 15150CT Units 535CT 550CT 590CT VRRM VRMS VDC I(AV) IFRM IFSM IRRM VF 1.0 0.57 0.84 0.72 － 0.5 10 400 10 1.5 -65 to +150 -65 to +175 0.75 0.65 － － 0.3 7.5 1,000 200 35 24 35 45 31 45 50 35 50 60 42 60 15 15 150 0.5 0.92 0.82 － － 0.1 5.0 1.05 0.92 － － 90 63 90 100 70 100 150 105 150 V V V A A A A Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current O at Tc=105 C Peak Repetitive Forward Current (Rated VR, o Square Wave, 20KHz) at Tc=105 C Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Peak Repetitive Reverse Surge Current (Note 1) Maximum Instantaneous Forward Voltage at: IF=7.5A, TC=25oC (Note 2) IF=7.5A, TC=125oC IF=15A, TC=25oC IF=15A, TC=125oC V Maximum Instantaneous Reverse Current o @ Tc =25 C at Rated DC Blocking Voltage o (Note 2) @ Tc=125 C Voltage Rate of Change (Rated VR) Typical Junction Capacitance Maximum Typical Thermal Resistance (Note 3) Operating Junction Temperature Range Storage Temperature Range IR dV/dt Cj RθJA RθJC TJ TSTG mA mA V/uS pF o C/W o o C C Notes: 1. 2.0us Pulse Width, f=1.0 KHz 2. Pulse Test: 300us Pulse Width, 1% Duty Cycle 3. Mount on Heatsink Size of 2 “ x 3 “ x 0.25” Al-Plate. - 120 - Version: B07 RATINGS AND CHARACTERISTIC CURVES (MBR1535CT THRU MBR15150CT) FIG.1- FORWARD CURRENT DERATING CURVE 25 300 RESISTIVE OR INDUCTIVE LOAD PEAK FORWARD SURGE CURRENT. (A) FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER LEG Tj=Tj max. 8.3ms Single Half Sine Wave JEDEC Method AVERAGE FORWARD CURRENT. (A) 20 250 200 150 15 10 100 5 50 0 0 50 100 o 0 150 1 CASE TEMPERATURE. ( C) 10 NUMBER OF CYCLES AT 60Hz 100 FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG 40 FIG.4- TYPICAL REVERSE CHARACTERISTICS PER LEG 50 Tj=125 0C 10 INSTANTANEOUS FORWARD CURRENT. (A) M 15 BR 90 -1 CT MB R1 51 5 T 0C INSTANTANEOUS REVERSE CURRENT. (mA) 51 00 CT 10 Tj=125 0C 1 1 Tj=25 0C 0.1 Tj=75 0C 0.1 Pulse Width=300 s 1% Duty Cycle MBR1535CT-MBR1545CT MBR1550CT-MBR1560CT MBR1590CT-MBR15100CT 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 FORWARD VOLTAGE. (V) 0.01 MBR1535CT-MBR1545CT MBR1550CT-MBR15150CT Tj=25 0C 0.001 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FIG.5- TYPICAL JUNCTION CAPACITANCE PER LEG 4,000 Tj=25 0C f=1.0MHz Vsig=50mVp-p FIG.6- TYPICAL TRANSIENT THERMAL CHARACTERISTICS PER LEG 100 TRANSIENT THERMAL IMPEDANCE ( OC/W) JUNCTION CAPACITANCE.(pF) 1,000 500 10.0 100 1 40 MBR1535CT-MBR1560CT MBR1590CT-MBR15150CT 10 0.1 1.0 4.0 10 REVERSE VOLTAGE. (V) 50 100 0.1 0.01 0.1 1 10 100 T, PULSE DURATION. (sec) Version: B07