2SD1628G-X-AB3-R

UNISONIC TECHNOLOGIES CO., LTD 2SD1628 Preliminary NPN SILICON TRANSISTOR HIGH-CURRENT SWITCHING APPLICATIONS FEATURES * Low saturation voltage. * High hFE. * Large current capacity. 1 SOT-89 Lead-free: 2SD1628L Halogen-free: 2SD1628G ORDERING INFORMATION Normal 2SD1628-x-AB3-R Ordering Number Lead Free Plating 2SD1628L-x-AB3-R Halogen Free 2SD1628G-x-AB3-R Package SOT-89 Pin Assignment 1 2 3 B C E Packing Tape Reel www.unisonic.com.tw Copyright © 2009 Unisonic Technologies Co., 1of 3 QW-R208-045.a 2SD1628 PARAMETER Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Preliminary NPN SILICON TRANSISTOR ABSOLUATE MAXIUM RATINGS (Ta = 25°C) SYMBOL RATINGS UNIT VCBO 60 V VCEO 20 V VEBO 6 V DC IC 5 A Collector Current Pulse ICP 8 A Collector Dissipation PC 0.5 W Junction Temperature TJ 150 °C Storage Temperature TSTG -55~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (Ta= 25°C, unless otherwise specified) PARAMETER Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage Collector Cut-Off Current Emitter Cut-Off Current DC Current Gain SYMBOL VCE(SAT) VBE(SAT) ICBO IEBO hFE1 hFE2 Cob Output Capacitance Transition Frequency fT tON tS tF TEST CONDITIONS IC =3A, IB =60mA IC =3A, IB =60mA VCB =50V, IE =0 VEB =5V, IC =0 VCE =2V, IC =0.5A VCE =2V, IC =3A VCB =10V, f =1MHz VCE =10V, IC =50mA See specified Test circuit MIN 120 95 TYP MAX UNIT 500 mV 1.5 V 100 nA 100 nA 560 45 120 30 300 40 pF MHz ns ns ns Turn On Time Storage Time Fall Time ■ CLASSIFICATION OF hFE1 RANK RANGE E 120 ~ 200 F 160 ~ 320 G 280 ~ 560 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 3 QW-R208-045.a 2SD1628 ■ Preliminary NPN SILICON TRANSISTOR SWITCHING TIME TEST CIRCUIT IB1 INPUT 1 IB2 PW=10μS Duty=2% tR, tF≤7ms 50 200VR 5 OUTPUT 1μ -5V Unit (Resistance:Ω, Capacitance:F ) 1μ 10V 10IB1= -10IB2=IC=2A UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R208-045.a