BC328

UTC BC327/328 PNP EPITAXIAL SILICON TRANSISTOR SWITCHING AND AMPLIFIER APPLICATIONS FEATURES *Suitable for AF-Driver stages and low power output stages *Complement to BC337/338 1 TO-92 1: COLLECTOR 2: BASE 3: EMITTER ABSOLUTE MAXIMUM RATINGS (Ta=25°C, unless otherwise specified) PARAMETER Collector-emitter voltage : BC327 : BC328 Collector-emitter voltage : BC327 : BC328 Emitter-base voltage Collector current (DC) Collector dissipation Junction Temperature Storage Temperature SYMBOL VCES RATING -50 -30 UNIT V V V V V mA mW °C °C VCEO -45 -25 -5 -800 625 150 -55 ~ +150 VEBO Ic Pc Tj TSTG ELECTRICAL CHARACTERISTICS (Ta=25°C, unless otherwise specified) PARAMETER Collector-emitter breakdown voltage : BC327 : BC328 Collector-emitter breakdown voltage : BC327 : BC328 Emitter-base breakdown voltage Collector Cut-off Current : BC327 : BC328 DC current gain Collector-emitter saturation voltage SYMBOL BVCEO TEST CONDITIONS Ic=-10mA, IB=0 MIN -45 -25 TYP MAX UNIT V V V V V BVCES Ic=-0.1mA, VBE=0 -50 -30 -5 -2 -2 100 40 -100 -100 630 -0.7 BVEBO ICES IE=-10mA, Ic=0 VCE=-45V, IB=0 VCE=-25V, IB=0 VCE=-1V, Ic=-100mA VCE=-1V, Ic=-300mA Ic=-500mA, IB=-50mA nA nA hFE1 hFE2 VCE(sat) V UTC UNISONIC TECHNOLOGIES CO., LTD. 1 QW-R201-038,A UTC BC327/328 PARAMETER Base-emitter on voltage Current gain bandwidth product Output Capacitance PNP EPITAXIAL SILICON TRANSISTOR SYMBOL VBE(on) fT Cob TEST CONDITIONS VCE=-1V, Ic=-300mA VCE=-5V, Ic=-10mA, f=20MHz VCB=-10V, IE=0, f=1MHz MIN TYP 100 12 MAX -1.2 UNIT V MHz pF CLASSIFICATION OF hFE RANK hFE1 hFE2 16 100-250 60~ 25 160-400 100~ 40 250-630 170~ UTC UNISONIC TECHNOLOGIES CO., LTD. 2 QW-R201-038,A UTC BC327/328 PNP EPITAXIAL SILICON TRANSISTOR TYPICAL CHARACTERISTICS UTC UNISONIC TECHNOLOGIES CO., LTD. 3 QW-R201-038,A UTC BC327/328 PNP EPITAXIAL SILICON TRANSISTOR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UTC UNISONIC TECHNOLOGIES CO., LTD. 4 QW-R201-038,A