U74HC2G32L-SM1-R

UNISONIC TECHNOLOGIES CO., LTD U74HC2G32 2-INPUT OR GATE CMOS IC DESCRIPTION The U74HC2G32 is a 2-input OR gate which provides the Function Y=A+B. MSOP-8 FEATURES * Operation Voltage Range: 2.0~6.0V * Low Power Dissipation: ICC=10µA(Max) * High Speed: tpd=9ns(Vcc=4.5V, CL=50pF) *Specified from -40 to +85℃ and -40 to +125℃ *Pb-free plating product number: U74HC2G32L ORDERING INFORMATION Order Number Normal Lead Free Plating U74HC2G32-SM1-R U74HC2G32L-SM1-R U74HC2G32-SM1-T U74HC2G32L-SM1-T Package MSOP-8 MSOP-8 Packing Tape Reel Tube U 74HC2G32L-SM1-R (1)Packing Type (2)Package Type (3)Lead Plating (1) R: Tape Reel, T: Tube (2) SM1: MSOP-8 (3) L: Lead Free Plating, Blank: Pb/Sn MARKING 8 7 6 03B 1 2 3 4 5 Lead Plating www.unisonic.com.tw Copyright © 2005 Unisonic Technologies Co., Ltd 1 of 5 QW-R502-083,A U74HC2G32 PIN CONFIGURATION 1A 1 1B 2 2Y 3 GND 4 8 VCC 7 1Y 6 2B 5 2A CMOS IC FUNCTION TABLE (each gate) INPUT A L L H H B L H L H OUTPUT Y L H H H LOGIC DIAGRAM (positive logic) 1 2 1 2 ≥ 7 Y A B 7 Y A B UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R502-083,A U74HC2G32 ABSOLUTE MAXIMUM RATING (unless otherwise specified)(Note 1) CMOS IC PARAMETER SYMBOL RATINGS UNIT Supply Voltage VCC -0.5~7 V Input Voltage VIN -0.5~7 V Output Voltage VOUT -0.5~VCC+0.5 V Input Clamp Current IIK ±20 mA Output Clamp Current IOK ±20 mA Output Current IOUT 25 mA VCC or GND Current ICC 50 mA Power Dissipation PD 300 mW Storage Temperature TSTG -65 ~ +150 ℃ Note 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. RECOMMENDED OPERATING COMDITIONS PARAMETER Supply Voltage Input Voltage Output Voltage Input Transition Rise or Fall Times Operating Temperature SYMBOL VCC VIN VOUT tR , tF TA CONDITIONS MIN 2.0 0 0 TYP 5.0 MAX 6.0 VCC VCC 1000 500 400 125 UNIT V V V ns ℃ VCC=2.0V VCC=4.5V VCC=6V -40 6 25 STATIC CHARACTERISTICS PARAMETER High-Level Input Voltage SYMBOL TEST CONDITIONS VIH TA=25℃ TYP MAX VCC=2.0V 1.2 VCC=4.5V 2.4 VCC=6.0V 3.2 VCC=2.0V 0.8 0.5 VCC=4.5V 2.1 1.35 VCC=6.0V 2.8 1.8 VCC=2.0V, IOH=-20µA 1.9 2.0 VCC=4.5V, IOH=-20µA 4.4 4.5 VCC=6.0V, IOH=-20µA 5.9 6.0 VCC=4.5V, IOH=-4mA 4.18 4.32 VCC=6.0V, 5.68 5.81 IOH=-5.2mA VCC=2.0V, IOL=20µA 0 0.1 VCC=4.5V, IOL=20µA 0 0.1 VCC=6.0V, IOL=20µA 0 0.1 VCC=4.5V, IOH=4mA 0.15 0.26 VCC=6.0V, IOH=5.2mA 0.16 0.26 VCC=6.0V, VIN=VCC or ±0.1 GND VCC=6.0V, VIN=VCC or 1 GND, IOUT=0 VCC=5.0V, VIN=VCC or 1.5 GND MIN 1.5 3.15 4.2 -40~85℃ MIN MAX 1.5 3.15 4.2 0.5 1.35 1.8 1.9 4.4 5.9 4.13 5.63 0.1 0.1 0.1 0.33 0.33 ±1 10 -40~125℃ MIN MAX 1.5 3.15 4.2 0.5 1.35 1.8 1.9 4.4 5.9 3.7 5.2 0.1 0.1 0.1 0.4 0.4 ±1 20 UNIT V Low-Level Input Voltage VIL V High-Level Output Voltage VOH V Low-Level Output Voltage VOL V Input Leakage Current Quiescent Supply Current Input Capacitance II(LEAK) IQ CIN µA µA pF UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 5 QW-R502-083,A U74HC2G32 DYNAMIC CHARACTERISTICS (Input: tR,tF≤6ns;PRR≤1MHz) See Fig-1 and Fig-2 for test circuit and waveforms. PARAMETER SYMBOL TEST CONDITIONS TA=25℃ MIN TYP MAX 24 75 9 15 7 13 18 75 6 15 5 13 -40~85℃ MIN MAX 95 19 16 95 19 16 CMOS IC VCC= 2.0, CL= 50pF Propagation Delay From Input (A and B) to tPHL /tPLH VCC= 4.5, CL= 50pF Output(Y) VCC= 6.0, CL= 50pF VCC= 2.0, CL= 50pF Output Transition Time tTHL /tTLH VCC= 4.5, CL= 50pF VCC= 6.0, CL= 50pF Operating Characteristics PARAMETER SYMBOL TEST CONDITIONS Power Dissipation Capacitance Cpd No load, f=1MHz, VCC=5 -40~125℃ MIN MAX 110 22 20 125 25 20 TYP 10 UNIT ns ns UNIT pF UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 5 QW-R502-083,A U74HC2G32 TEST CIRCUIT AND WAVEFORMS Output C L (Note) CMOS IC Note: CL includes probe and jig capacitance. Fig.1 Load circuitry for switching times. 1/2 * VCC Input tPLH 90% 1/2 * VCC Output 10% tTLH 1/2 * VCC tPHL 90% 10% t THL 1/2 * VCC Fig. 2 Propagation delay from input(A and B) to output(Y) and Output transition time. UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-083,A