195D_08

195D Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated FEATURES • 8 mm, 12 mm tape packaging to EIA-481-1 reeling per IEC 286-3. 7’ (178 mm) standard 13" (330 mm) available • US and European case sizes available Pb-free Available RoHS* COMPLIANT PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 °C to + 85 °C (To + 125 °C with voltage derating) Note: Refer to Doc 40088 Capacitance Range: 0.1 µF to 330 µF Capacitance Tolerance: ± 10 %, ± 20 % standard Voltage Rating: 2 WVDC to 50 WVDC ORDERING INFORMATION 195D TYPE 106 CAPACITANCE This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. X0 CAPACITANCE TOLERANCE X0 = ± 20 % X9 = ± 10 % X5 = ± 5 % (Special Order) 004 DC VOLTAGE RATING AT + 85 °C This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V). S CASE CODE See Ratings and Case Codes Table 2 TERMINATION T PACKAGING T = Tape and Reel Style 2 is 7" [178 mm] Reel standard standard 2 = 100 % Tin 1/2" Reel minimum 4 = Gold Plated 13" [330] Reel 8 = Solder available excluding Plated (60/40) the “R” case, on Special Order request. See Tape and Reel Note: Preferred Tolerance and reel sizes are in bold. Specifications. We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage substitutions will be marked with the higher voltage rating. DIMENSIONS in inches [millimeters] Tantalum Wire Nib Identifies Anode (+) Terminal W L MAX. D REF. A B J MAX. J MAX. H CASE CODE C R S V X Y Z EIA SIZE N/A 7257 3518 3527 7227 7227 7227 L (MAX.) 0.087 [2.21] 0.283 [7.2] 0.143 [3.63] 0.143 [3.63] 0.285 [7.24] 0.285 [7.24] 0.285 [7.24] W 0.045 ± 0.010 [1.14 ± 0.25] 0.235 + 0.012/- 0.024 [6.0 + 0.3/- 0.6] 0.072 ± 0.008 [1.83 ± 0.20] 0.104 ± 0.010 [2.65 ± 0.25] 0.104 ± 0.010 [2.65 ± 0.25] 0.104 ± 0.010 [2.65 ± 0.25] 0.104 ± 0.010 [2.65 ± 0.25] H 0.045 ± 0.010 [1.14 ± 0.25] 0.136 ± 0.012 [3.5 ± 0.3] 0.048 ± 0.008 [1.22 ± 0.20] 0.051 ± 0.010 [1.30 ± 0.25] 0.051 ± 0.010 [1.30 ± 0.25] 0.069 ± 0.010 [1.75 ± 0.25] 0.104 ± 0.010 [2.65 ± 0.25] A 0.016 ± 0.008 [0.40 ± 0.20] 0.051 ± 0.012 [1.3 ± 0.3] 0.023 ± 0.010 [0.58 ± 0.25] 0.023 ± 0.010 [0.58 ± 0.25] 0.040 ± 0.020 [1.00 ± 0.50] 0.040 ± 0.020 [1.00 ± 0.50] 0.040 ± 0.020 [1.00 ± 0.50] B 0.042 ± 0.010 [1.07 ± 0.25] 0.180 ± 0.025 [4.6 ± 0.6] 0.085 ± 0.015 [2.16 ± 0.37] 0.085 ± 0.015 [2.16 ± 0.37] 0.200 ± 0.027 [5.08 ± 0.69] 0.200 ± 0.027 [5.08 ± 0.69] 0.200 ± 0.023 [5.08 ± 0.59] D (REF.) 0.063 [1.60] 0.243 [6.20] 0.115 [2.90] 0.115 [2.90] 0.243 [6.20] 0.243 [6.20] 0.243 [6.20] J (MAX.) 0.004 [0.10] 0.004 [0.10] 0.004 [0.10] 0.004 [0.10] 0.004 [0.10] 0.004 [0.10] 0.004 [0.10] Note: The anode termination (D less B) will be a minimum of 0.010 (0.25), C Case = 0.005 (0.131) minimum * Pb containing terminations are not RoHS compliant, exemptions may apply www.vishay.com 110 For technical questions, contact: tantalum@vishay.com Document Number: 40011 Revision: 05-May-08 195D Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated Vishay Sprague RATINGS AND CASE CODES µF 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 120 150 180 220 330 C S S S V X X Y Y Z R R R R R C S S S V X X Y Y Z Z R R R R S C S S S V X X Y Z Z R R R R C S S S V X X Y Y/Z Z R R C S S S V X X Y Z Z R R C S S S V X X Y Y Z R R C S S S V X Y Z Z Z R R 4V 6.3 V 10 V 16 V 20 V 25 V 35 V 50 V C C C/S S V V X X Y Z Z R R STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER (1) MAX. DCL AT + 25 °C (µA) 0.5 0.5 0.5 0.5 0.6 0.9 1.3 1.9 2.7 4.0 4.8 6.0 7.2 8.8 13.2 MAX. DF AT + 25 °C 120 Hz (%) 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 4 WVDC AT + 85 °C, SURGE = 5 V . . . 2.7 WVDC AT + 125 °C, SURGE = 3.4 V 3.3 4.7 6.8 10 15 22 33 47 68 100 120 150 180 220 330 (1) C S S S V X X Y Y Z R R R R R 195D335X_004C2T 195D475X_004S2T 195D685X_004S2T 195D106X_004S2T 195D156X_004V2T 195D226X_004X2T 195D336X_004X2T 195D476X_004Y2T 195D686X_004Y2T 195D107X_004Z2T 195D127X_004R2T 195D157X_004R2T 195D187X_004R2T 195D227X_004R2T 195D337X_004R2T Note: For 10 % tolerance, specify “9“: for 20 % tolerance, change to “0“. Document Number: 40011 Revision: 05-May-08 For technical questions, contact: tantalum@vishay.com www.vishay.com 111 195D Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER (1) MAX. DCL AT + 25 °C (µA) MAX. DF AT + 25 °C 120 Hz (%) 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 4 6 6 6 6 6 6 6 6 6 6 6 6 6.3 WVDC AT + 85 °C, SURGE = 8 V . . . 4 WVDC AT + 125 °C, SURGE = 5 V 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 120 150 180 220 1 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 120 150 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 22 33 47 68 C 195D225X_6R3C2T 0.5 S 195D335X_6R3S2T 0.5 S 195D475X_6R3S2T 0.5 S 195D685X_6R3S2T 0.5 V 195D106X_6R3V2T 0.6 X 195D156X_6R3X2T 0.9 X 195D226X_6R3X2T 1.3 Y 195D336X_6R3Y2T 2.0 Y 195D476X_6R3Y2T 2.8 Z 195D686X_6R3Z2T 4.1 Z 195D107X_6R3Z2T 6.0 R 195D127X_6R3R2T 7.2 R 195D157X_6R3R2T 9.0 R 195D187X_6R3R2T 10.8 R 195D227X_6R3R2T 13.2 10 WVDC AT + 85 °C, SURGE = 13V . . . 7 WVDC AT + 125 °C, SURGE = 9 V S 195D105X_010S2T 0.4 C 195D155X_010C2T 0.5 S 195D225X_010S2T 0.5 S 195D335X_010S2T 0.5 S 195D475X_010S2T 0.5 V 195D685X_010V2T 0.7 X 195D106X_010X2T 1.0 X 195D156X_010X2T 1.5 Y 195D226X_010Y2T 2.2 Z 195D336X_010Z2T 3.0 Z 195D476X_010Z2T 4.7 R 195D686X_010R2T 6.8 R 195D107X_010R2T 10 R 195D127X_010R2T 12 R 195D157X_010R2T 15 16 WVDC AT + 85 °C, SURGE = 20 V . . . 10 WVDC AT + 125 °C, SURGE = 12 V C S S S V X X Y Y Z Z R R 195D105X_016C2T 195D155X_016S2T 195D225X_016S2T 195D335X_016S2T 195D475X_016V2T 195D685X_016X2T 195D106X_016X2T 195D156X_016Y2T 195D226X_016Y2T 195D226X_016Z2T 195D336X_016Z2T 195D476X_016R2T 195D686X_016R2T 0.5 0.5 0.5 0.5 0.7 1.0 1.5 2.3 3.2 3.3 5.0 7.1 10.2 Note: (1) For 10 % tolerance, specify “9“: for 20 % tolerance, change to “0“. www.vishay.com 112 For technical questions, contact: tantalum@vishay.com Document Number: 40011 Revision: 05-May-08 195D Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated STANDARD RATINGS CAPACITANCE (µF) MAX. DCL AT + 25 °C (µA) 20 WVDC AT + 85 °C, SURGE = 26 V . . . 13 WVDC AT + 125 °C, SURGE = 16 V C 195D684X_020C2T 0.5 S 195D105X_020S2T 0.5 S 195D155X_020S2T 0.5 S 195D225X_020S2T 0.5 V 195D335X_020V2T 0.7 X 195D475X_020X2T 0.9 X 195D685X_020X2T 1.4 Y 195D106X_020Y2T 2.0 Z 195D156X_020Z2T 3.0 Z 195D226X_020Z2T 4.4 R 195D336X_020R2T 6.6 R 195D476X_020R2T 9.4 25 WVDC AT + 85 °C, SURGE = 32 V . . . 17 WVDC AT + 125 °C, SURGE = 20 V C 195D474X_025C2T 0.5 S 195D684X_025S2T 0.5 S 195D105X_025S2T 0.5 S 195D155X_025S2T 0.5 V 195D225X_025V2T 0.6 X 195D335X_025X2T 0.8 X 195D475X_025X2T 1.2 Y 195D685X_025Y2T 1.7 Y 195D106X_025Y2T 2.5 Z 195D156X_025Z2T 3.8 R 195D226X_025R2T 5.5 R 195D336X_025R2T 8.3 35 WVDC AT + 85 °C, SURGE = 46 V . . . 23 WVDC AT + 125 °C, SURGE = 28 V C 195D334X_035C2T 0.5 S 195D474X_035S2T 0.5 S 195D684X_035S2T 0.5 S 195D105X_035S2T 0.5 V 195D155X_035V2T 0.5 X 195D225X_035X2T 0.8 Y 195D335X_035Y2T 1.2 Z 195D475X_035Z2T 1.6 Z 195D685X_035Z2T 2.4 Z 195D106X_035Z2T 3.5 R 195D156X_035R2T 5.3 R 195D226X_035R2T 7.7 50 WVDC AT + 85 °C, SURGE = 65 V . . . 33 WVDC AT + 125 °C, SURGE = 38 V C 195D104X_050C2T 0.5 C 195D154X_050C2T 0.5 C 195D224X_050C2T 0.5 S 195D224X_050S2T 0.4 S 195D334X_050S2T 0.5 V 195D474X_050V2T 0.5 V 195D684X_050V2T 0.5 X 195D105X_050X2T 0.5 X 195D155X_050X2T 0.8 Y 195D225X_050Y2T 1.1 Z 195D335X_050Z2T 1.7 Z 195D475X_050Z2T 2.4 R 195D685X_050R2T 3.4 R 195D106X_050R2T 5.0 CASE CODE PART NUMBER (1) MAX. DF AT + 25 °C 120 Hz (%) 4 4 6 6 6 6 6 6 6 6 6 6 4 4 4 6 6 6 6 6 6 6 6 6 4 4 4 4 6 6 6 6 6 6 6 6 4 4 4 4 4 4 4 4 6 6 6 6 6 6 Vishay Sprague 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 0.1 0.15 0.22 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 Note: (1) For 10 % tolerance, specify “9“: for 20 % tolerance, change to “0“. For technical questions, contact: tantalum@vishay.com www.vishay.com 113 Document Number: 40011 Revision: 05-May-08 195D Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated TYPICAL CURVES AT + 25 °C, IMPEDANCE AND ESR VS. FREQUENCY “S” Case “V” Case IMPEDANCE ESR 100 100 10 Ω Ω 10 0.47 µF - 50 VDC 1 1 15 µF - 4 VDC 0.1 1K 10K 100K 1M 10M 100M FREQUENCY IN Hz 0.1 1K 10K 100K 1M 10M 100M FREQUENCY IN Hz “X” Case 1000 IMPEDANCE ESR 10 10 100 “Y” Case IMPEDANCE ESR 100 Ω 6.8 µF - 20 VDC 1 Ω 22 µF - 10 VDC 1 0.1 10 µF - 16 VDC 0.01 100 1K 10K 100K 1M 10M FREQUENCY IN Hz 0.1 47 µF - 6.3 VDC 0.01 100 1K 10K 100K FREQUENCY IN Hz 1M 10M “Z” Case 100 IMPEDANCE ESR 10 4.7 µF - 50 VDC Ω 1 0.1 100 µF - 6.3 VDC 0.01 100 1K 10K 100K 1M 10M FREQUENCY IN Hz www.vishay.com 114 For technical questions, contact: tantalum@vishay.com Document Number: 40011 Revision: 05-May-08 195D Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated ORDERING INFORMATION - EUROPEAN USE ONLY 195D TYPE 106 CAPACITANCE This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. X0 CAPACITANCE TOLERANCE X0 = ± 20 % X9 = ± 10 % 004 DC VOLTAGE RATING AT + 85 °C This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V). D CASE CODE See Ratings and Case Codes Table 2 TERMINATION T PACKAGING Vishay Sprague T = Tape and Reel Style 2 is 180 mm Reel standard standard 2 = Solderable See Tape and Reel Coating 4 = Gold Plated Specifications. 8 = Solder Plated (60/40) Special Order Note: Preferred tolerance and reel sizes are in bold. We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same size. Voltage substitutions will be marked with the higher voltage rating. DIMENSIONS in millimeters W Tantalum wire Nib identifies Anode (+) terminal C L B D A H J J CASE CODE L ± 0.3 W ± 0.3 H (MAX.) A ± 0.3 B ± 0.3 1.6 2.5 2.5 3.2 3.6 4.5 5.0 C (MIN.) 0.3 0.3 0.5 0.8 0.8 0.8 0.8 A 2.8 ± 0.2 1.5 1.4 0.7 B 4.2 ± 0.2 1.4 1.6 0.8 D 4.2 ± 0.2 2.1 1.6 0.8 E 5.5 2.1 1.7 1.0 F 5.0 3.3 2.0 1.0 G 7.0 2.6 2.8 1.0 H 7.8 3.7 3.0 1.0 Note: The anode termination (D less B) will be a minimum of 0.010 (0.25), C Case = 0.005 (0.131) minimum 195D STANDARD RANGE, RATINGS AND CASE CODES µF 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 2V 4V 6.3 V 10 V 15 V 20 V 25 V 35 V/40 V A A A B B D D E F F G H 50 V A A B B D D E F F G H A A A B B D E F A B B D E F D E F G G A A A A A A A B B D D E D E B Document Number: 40011 Revision: 05-May-08 For technical questions, contact: tantalum@vishay.com www.vishay.com 115 195D Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated 195D STANDARD RANGE, RATINGS AND CASE CODES 15 22 33 47 68 100 E F F G H G H G H H F G H G H H STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER MAX. DCL AT + 25 °C (µA) MAX. DF AT + 25 °C 120 Hz (%) 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 6 6 6 6 6 6 7 6 6 6 6 6 6 6 6 6 3.3 4.7 6.8 10 2.2 4.7 10 15 33 68 100 1.5 3.3 6.8 10 22 47 68 1.0 2.2 4.7 6.8 15 47 100 0.47 0.68 1.0 1.5 3.3 4.7 10 22 33 2 WVDC AT + 85 °C, SURGE = 2.6 V . . . 1.2 WVDC AT + 125 °C, SURGE = 1.6 V A 195D335X_002A2T 0.5 A 195D475X_002A2T 0.5 A 195D685X_002A2T 0.5 A 195D106X_002A2T 0.6 4 WVDC AT + 85 °C, SURGE = 5 V . . . 2.7 WVDC AT + 125 °C, SURGE = 3.4 V A 195D225X_004A2T 0.5 B 195D475X_004B2T 0.5 D 195D106X_004D2T 0.5 E 195D156X_004E2T 0.6 F 195D336X_004F2T 1.3 G 195D686X_004G2T 2.7 H 195D107X_004H2T 4.0 6.3 WVDC AT + 85 °C, SURGE = 8 V . . . 4 WVDC AT + 125 °C, SURGE = 5 V A 195D155X_6R3A2T 0.5 B 195D335X_6R3B2T 0.5 D 195D685X_6R3D2T 0.5 E 195D106X_6R3E2T 0.6 F 195D226X_6R3F2T 1.3 G 195D476X_6R3G2T 2.8 H 195D686X_6R3H2T 4.1 10 WVDC AT + 85 °C, SURGE = 13 V . . . 7 WVDC AT + 125 °C, SURGE = 9 V A 195D105X_010A2T 0.5 B 195D225X_010B2T 0.5 D 195D475X_010D2T 0.5 E 195D685X_010E2T 0.7 F 195D156X_010F2T 1.5 H 195D476X_010H2T 4.7 H 195D107X_010H2T 8.0 15/16 WVDC AT + 85 °C, SURGE = 20 V...10 WVDC AT + 125 °C, SURGE = 12 V A 195D474X_015A2T 0.5 A 195D684X_015A2T 0.5 B 195D105X_015B2T 0.5 B 195D155X_015B2T 0.5 D 195D335X_015D2T 0.5 E 195D475X_015E2T 0.7 F 195D106X_015F2T 1.5 G 195D226X_015G2T 3.3 H 195D336X_015H2T 5.0 Note: * For 10 % tolerance, specify “9“: for 20 % tolerance, change to “0“ www.vishay.com 116 For technical questions, contact: tantalum@vishay.com Document Number: 40011 Revision: 05-May-08 195D Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER MAX. DCL AT + 25 °C (µA) 0.5 0.5 0.5 0.7 1.4 3.0 4.4 0.5 0.5 0.5 0.6 1.2 1.7 2.5 3.8 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.8 1.2 1.6 2.4 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.8 1.1 1.7 2.4 MAX. DF AT + 25 °C 120 Hz (%) 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 Vishay Sprague 20 WVDC AT + 85 °C, SURGE = 26 V . . . 13 WVDC AT + 125 °C, SURGE = 16 V 0.47 1.0 2.2 3.3 6.8 15 22 0.33 0.68 1.5 2.2 4.7 6.8 10 15 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 A B D E F G H A B D E F G G H A A A B B D D E F F G H A A B B D D E F F G H 195D474X_020A2T 195D105X_020B2T 195D225X_020D2T 195D335X_020E2T 195D685X_020F2T 195D156X_020G2T 195D226X_020H2T 195D334X_025A2T 195D684X_025B2T 195D155X_025D2T 195D225X_025E2T 195D475X_025F2T 195D685X_025G2T 195D106X_025G2T 195D156X_025H2T 195D104X_035A2T 195D154X_035A2T 195D224X_035A2T 195D334X_035B2T 195D474X_035B2T 195D684X_035D2T 195D105X_035D2T 195D155X_035E2T 195D225X_035F2T 195D335X_035F2T 195D475X_035G2T 195D685X_035H2T 195D104X_050A2T 195D154X_050A2T 195D224X_050B2T 195D334X_050B2T 195D474X_050D2T 195D684X_050D2T 195D105X_050E2T 195D155X_050F2T 195D225X_050F2T 195D335X_050G2T 195D475X_050H2T 25 WVDC AT + 85 °C, SURGE = 32 V . . . 17 WVDC AT + 125 °C, SURGE = 20 V 35/40 WVDC AT + 85 °C, SURGE = 46 / 52 V. . . 23 / 25 WVDC AT + 125 °C, SURGE = 28 / 30 V 50 WVDC AT + 85 °C, SURGE = 65 V . . . 33 WVDC AT + 125 °C, SURGE = 38 V Note: * For 10 % tolerance, specify “9“: for 20 % tolerance, change to “0“. Document Number: 40011 Revision: 05-May-08 For technical questions, contact: tantalum@vishay.com www.vishay.com 117 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1