BYS459-1500S_07

BYS459-1500S, BYS459F-1500S & BYS459B-1500S Vishay General Semiconductor High Voltage Damper Diodes TO-220AC ITO-220AC FEATURES • Glass passivated chip junction • Fast reverse recovery time • Low switching loss, high efficiency • Low forward voltage drop 2 1 BYS459-1500S PIN 1 PIN 2 2 1 BYS459F-1500S PIN 1 • High forward surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (for TO-263AB package) • Solder dip 260 °C, 40 s (for TO-220AC and ITO-220AC package) • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC CASE PIN 2 TO-263AB K 2 1 BYS459B-1500S PIN 1 PIN 2 K HEATSINK TYPICAL APPLICATIONS For use in high voltage and high frequency rectification of switching mode inverters, converters, freewheeling and ideal for CRT horizontal deflection application. MECHANICAL DATA 10 A 1500 V 130 A 220 ns 300 ns 1.25 V 150 °C PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM trr tfr VF TJ max. Case: TO-220AC, ITO-220AC, TO-263AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum working reverse voltage Maximum DC blocking voltage Maximum average forward rectified current (Fig. 1) Peak working forward current at f = 82 kHz Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range Isolation voltage (ITO-220AC only) from terminal to heatsink t = 1 min SYMBOL VRRM VRWM VDC IF(AV) IF(Peak) IFSM TJ, TSTG VAC VALUE 1500 1300 1500 10 10 130 - 55 to + 150 1500 UNIT V V V A A A °C V Document Number: 88551 Revision: 06-Nov-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 BYS459-1500S, BYS459F-1500S & BYS459B-1500S Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TJ = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage (1) Maximum DC reverse current Maximum reverse recovery time Maximum reverse recovery charge Maximum forward recovery time Peak forward recovery overshoot voltage Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle TEST CONDITIONS IF = 6.5 A, IF = 6.5 A, VRWM TJ = 25 °C TJ = 125 °C TJ = 25 °C TJ = 125 °C SYMBOL VF IR trr Qrr tfr VFP VALUE 1.35 1.25 250 1.0 220 0.95 300 27 UNIT V µA mA ns µC ns V IF = 1.0 A, dI/dt = 50 A/µs, VR = 30 V IF = 2.0 A, dI/dt = 20 A/µs, VR = 30 V IF = 6.5 A, dI/dt = 52 A/µs, VR = 5 V IF = 6.5 A, dI/dt = 52 A/µs THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance from junction to case SYMBOL RθJC BYS459 2.0 BYS459F 4.0 BYS459B 2.0 UNIT °C/W ORDERING INFORMATION (Example) PACKAGE TO-220AC ITO-220AC TO-263AB TO-263AB PREFERRED P/N BYS459-1500S-E3/45 BYS459F-1500S-E3/45 BYS459B-1500S-E3/45 BYS459B-1500S-E3/81 UNIT WEIGHT (g) 1.80 1.95 1.77 1.77 PACKAGE CODE 45 45 45 81 BASE QUANTITY 50/tube 50/tube 50/tube 800/reel DELIVERY MODE Tube Tube Tube Tape reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 12 140 Peak Forward Surge Current (A) Average Forward Current (A) 10 BYS459-1500S BYS459B-1500S 120 100 80 60 40 20 0 8 BYS459F-1500S 6 4 2 0 25 50 75 100 125 150 175 1 10 100 Case Temperature (°C) Number of Cycles at 60 Hz Figure 1. Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88551 Revision: 06-Nov-07 BYS459-1500S, BYS459F-1500S & BYS459B-1500S Vishay General Semiconductor 100 1000 TJ = 125 °C Instantaneous Forward Current (A) 10 Junction Capacitance (pF) 100 1 TJ = 25 °C 10 0.1 0 0.5 1.0 1.5 2.0 2.5 1 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Forward Voltage Figure 5. Typical Capacitance 1000 450 400 Instantaneous Reverse Current (µA) 100 TJ = 125 °C Reverse Recovery Time (ns) 350 300 250 200 dI/dt = 50 A/µs 10 TJ = 100 °C 1 dI/dt = 100 A/µs 150 100 50 0.1 TJ = 25 °C 0.01 0 200 400 600 800 1000 1200 1400 1600 0 0 2 4 6 8 10 12 Reverse Voltage (V) Forward Current (A) Figure 4. Typical Reverse Current Figure 6. Typical Reverse Recovery Time Document Number: 88551 Revision: 06-Nov-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 BYS459-1500S, BYS459F-1500S & BYS459B-1500S Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AC 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) DIA. 0.148 (3.74) DIA. 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 0.635 (16.13) 0.625 (15.87) 1 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) PIN 1 PIN 2 CASE ITO-220AC 0.404 (10.26) 0.384 (9.75) 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 45° REF. 0.671 (17.04) 0.651 (16.54) PIN 0.076 (1.93) REF. 0.076 (1.93) REF. 7° REF. 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.135 (3.43) DIA. 0.122 (3.08) DIA. 0.190 (4.83) 0.170 (4.32) 0.110 (2.79) 0.100 (2.54) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.603 (15.32) 0.573 (14.55) 0.600 (15.24) 0.580 (14.73) 7° REF. 0.350 (8.89) 0.330 (8.38) PIN 1 2 0.191 (4.85) 0.171 (4.35) 7° REF. 2 0.110 (2.79) 0.100 (2.54) 0.560 (14.22) 0.530 (13.46) 0.560 (14.22) 0.530 (13.46) 0.057 (1.45) 0.045 (1.14) 0.110 (2.79) 0.100 (2.54) 0.037 (0.94) 0.027 (0.68) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) 0.025 (0.64) 0.015 (0.38) 0.035 (0.89) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95) 0.028 (0.71) 0.020 (0.51) TO-263AB 0.411 (10.45) 0.380 (9.65) 0.245 (6.22) MIN. K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.055 (1.40) 0.047 (1.19) 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) 0.33 (8.38) MIN. 0.190 (4.83) 0.160 (4.06) 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 (10.66) MIN. 0.624 (15.85) 0.591 (15.00) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) www.vishay.com 4 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88551 Revision: 06-Nov-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1