IRF9610

IRF9610, SiHF9610 Vishay Siliconix Power MOSFET PRODUCT SUMMARY VDS (V) RDS(on) (Ω) Qg (Max.) (nC) Qgs (nC) Qgd (nC) Configuration VGS = - 10 V 11 7.0 4.0 Single S FEATURES - 200 3.0 • Dynamic dV/dt Rating • P-Channel • Fast Switching • Ease of Paralleling • Simple Drive Requirements • Lead (Pb)-free Available Available RoHS* COMPLIANT DESCRIPTION The Power MOSFETs technology is the key to Vishay’s advanced line of Power MOSFET transistors. The efficient geometry and unique processing of the Power MOSFETs design achieve very low on-state resistance combined with high transconductance and extreme device ruggedness. The TO-220 package is universally preferred for all commercial-industrial applications at power dissipation levels to approximately 50 W. The low thermal resistance and low package cost of the TO-220 contribute to its wide acceptance throughout the industry. TO-220 G S G D D P-Channel MOSFET ORDERING INFORMATION Package Lead (Pb)-free SnPb TO-220 IRF9610PbF SiHF9610-E3 IRF9610 SiHF9610 ABSOLUTE MAXIMUM RATINGS TC = 25 °C, unless otherwise noted PARAMETER Drain-Source Voltage Gate-Source Voltage Continuous Drain Current Pulsed Drain Currenta VGS at - 10 V TC = 25 TC = 100 SYMBOL VDS VGS ID IDM LIMIT - 200 ± 20 - 1.8 - 1.0 - 7.0 0.16 TC = 25 °C PD ILM dV/dt TJ, Tstg for 10 s 6-32 or M3 screw 20 - 7.0 - 5.0 - 55 to + 150 300d 10 1.1 W/°C W A V/ns °C lbf · in N·m A UNIT V Linear Derating Factor Maximum Power Dissipation Inductive Current, Clamp Peak Diode Recovery dV/dtc Operating Junction and Storage Temperature Range Soldering Recommendations (Peak Temperature) Mounting Torque Notes a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 5). b. Not applicable. c. ISD ≤ - 1.8 A, dI/dt ≤ 70 A/µs, VDD ≤ VDS, TJ ≤ 150 °C. d. 1.6 mm from case. * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 91080 S-Pending-Rev. A, 20-Jun-08 www.vishay.com 1 WORK-IN-PROGRESS IRF9610, SiHF9610 Vishay Siliconix THERMAL RESISTANCE RATINGS PARAMETER Maximum Junction-to-Ambient Case-to-Sink, Flat, Greased Surface Maximum Junction-to-Case (Drain) SYMBOL RthJA RthCS RthJC TYP. 0.50 MAX. 62 6.4 °C/W UNIT SPECIFICATIONS TJ = 25 °C, unless otherwise noted PARAMETER Static Drain-Source Breakdown Voltage VDS Temperature Coefficient Gate-Source Threshold Voltage Gate-Source Leakage Zero Gate Voltage Drain Current Drain-Source On-State Resistance Forward Transconductance Dynamic Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge Gate-Source Charge Gate-Drain Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Internal Drain Inductance Internal Source Inductance Drain-Source Body Diode Characteristics Continuous Source-Drain Diode Current Pulsed Diode Forward Currenta Body Diode Voltage Body Diode Reverse Recovery Time Body Diode Reverse Recovery Charge Forward Turn-On Time IS ISM VSD trr Qrr ton MOSFET symbol showing the integral reverse p - n junction diode D SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT VDS ΔVDS/TJ VGS(th) IGSS IDSS RDS(on) gfs VGS = 0 V, ID = - 250 µA Reference to 25 °C, ID = - 1 mA VDS = VGS, ID = - 250 µA VGS = ± 20 V VDS = - 200 V, VGS = 0 V VDS = - 160 V, VGS = 0 V, TJ = 125 °C VGS = - 10 V ID = -0.90 Ab VDS = - 50 V, ID = - 0.90 Ab - 200 - 2.0 0.90 - 0.23 - - 4.0 ± 100 - 100 - 500 3.0 - V V/°C V nA µA Ω S Ciss Coss Crss Qg Qgs Qgd td(on) tr td(off) tf LD LS VGS = 0 V, VDS = - 25 V, f = 1.0 MHz, see fig. 10 - 170 50 15 8.0 15 10 8.0 4.5 7.5 11 7.0 4.0 nH ns nC pF VGS = - 10 V ID = - 3.5 A, VDS = - 160 V, see fig. 11 and 18b - VDD = - 100 V, ID = - 0.90 A, RG = 50 Ω, RD = 11 Ω, see fig. 17b - Between lead, 6 mm (0.25") from package and center of die contact D - G S - 240 1.7 - 1.8 A - 7.0 - 5.8 360 2.6 V ns µC G S TJ = 25 °C, IS = - 1.8 A, VGS = 0 Vb TJ = 25 °C, IF = - 1.8 A, dI/dt = 100 A/µsb Intrinsic turn-on time is negligible (turn-on is dominated by LS and LD) Notes a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 5). b. Pulse width ≤ 300 µs; duty cycle ≤ 2 %. www.vishay.com 2 Document Number: 91080 S-Pending-Rev. A, 20-Jun-08 IRF9610, SiHF9610 Vishay Siliconix TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted Fig. 1 - Typical Output Characteristics Fig. 3 - Typical Saturation Characteristics Fig. 2 - Typical Transfer Characteristics Fig. 4 - Maximum Safe Operating Area Fig. 5 - Maximum Effective Transient Thermal Impedance, Junction-to-Case vs. Pulse Duration Document Number: 91080 S-Pending-Rev. A, 20-Jun-08 www.vishay.com 3 IRF9610, SiHF9610 Vishay Siliconix Fig. 6 - Typical Transconductance vs. Drain Current Fig. 9 - Normalized On-Resistance vs. Temperature Fig. 7 - Typical Source-Drain Diode Forward Voltage Fig. 10 - Typical Capacitance vs. Drain-to-Source Voltage Fig. 8 - Breakdown Voltage vs. Temperature Fig. 11 - Typical Gate Charge vs. Gate-to-Source Voltage www.vishay.com 4 Document Number: 91080 S-Pending-Rev. A, 20-Jun-08 IRF9610, SiHF9610 Vishay Siliconix Fig. 12 - Typical On-Resistance vs. Drain Current Fig. 13 - Maximum Drain Current vs. Case Temperature Fig. 14 - Power vs. Temperature Derating Curve L Vary tp to obtain required IL D.U.T. VDD VDS V DD EC 0.05 Ω IL VDD = 0.5 VDS EC = 0.75 VDS + VGS = - 10 V tp IL tp EC Fig. 16 - Clamped Inductive Waveforms VDS Fig. 15 - Clamped Inductive Test Circult Document Number: 91080 S-Pending-Rev. A, 20-Jun-08 www.vishay.com 5 IRF9610, SiHF9610 Vishay Siliconix RD VDS 15 V VGS RG D.U.T. + VDD QG QGS QGD - 10 V Pulse width ≤ 1 µs Duty factor ≤ 0.1 % VG Charge Fig. 17a - Switching Time Test Circuit Fig. 18a - Basic Gate Charge Waveform Current regulator Same type as D.U.T. td(on) VGS 10 % tr td(off) tf 12 V 50 kΩ 0.2 µF 0.3 µF 90 % VDS VGS - 3 mA IG ID Current sampling resistors Fig. 17b - Switching Time Waveforms Fig. 18b - Gate Charge Test Circuit www.vishay.com 6 Document Number: 91080 S-Pending-Rev. A, 20-Jun-08 + D.U.T. - VDS IRF9610, SiHF9610 Vishay Siliconix Peak Diode Recovery dV/dt Test Circuit + P.W. Period Ripple ≤ 5 % D.U.T. Circuit layout considerations • Low stray inductance • Ground plane • Low leakage inductance current transformer RG Compliment N-Channel of D.U.T. for driver Driver gate drive D= D.U.T. ISD waveform Reverse recovery current Body diode forward current dI/dt D.U.T. VDS waveform Diode recovery dV/dt Re-applied voltage Inductor current Body diode forward drop * VGS = - 5 V for logic level and - 3 V drive devices Fig. 19 - For P-Channel Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see http://www.vishay.com/ppg?91080. Document Number: 91080 S-Pending-Rev. A, 20-Jun-08 + + • dV/dt controlled by RG • ISD controlled by duty factor "D" • D.U.T. - device under test + - VDD P.W. Period VGS = - 10 V* VDD ISD www.vishay.com 7 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1