M6060C

New Product M6035C thru M6060C Vishay General Semiconductor Dual Common-Cathode Schottky Rectifier FEATURES • Guarding for overvoltage protection • Low power losses, high efficiency • Low forward voltage drop • High forward surge capability • High frequency operation • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC 2 3 TO-220AB 1 PIN 1 PIN 3 PIN 2 CASE TYPICAL APPLICATIONS For use in low voltage, high frequency rectifier of switching mode power supplies, freewheeling diodes, oring diodes, dc-to-dc converters or polarity protection applications. MECHANICAL DATA Case: TO-220AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM VF TJ max. 30 A x 2 35 V to 60 V 320 A 0.51 V, 0.56 V 150 °C MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum average forward rectified current (Fig. 1) total device per diode SYMBOL VRRM IF(AV) IFSM IRRM dV/dt TJ, TSTG M6035C 35 M6045C 45 60 30 320 1.0 10 000 - 65 to + 150 M6060C 60 UNIT V A A A V/µs °C Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode Peak repetitive reverse current at tp = 2.0 µs, 1 kHz per diode Voltage rate of change (rated VR) Operating junction and storage temperature range ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITION IF = 1 0 A IF = 2 0 A IF = 3 0 A IF = 1 0 A IF = 2 0 A IF = 3 0 A VR 4.0 V, 1 MHz SYMBOL M6035C TYP. 0.42 0.49 0.55 0.31 0.42 0.51 140 106 1170 M6045C MAX. 0.61 0.56 700 175 M6060C TYP. 0.43 0.52 0.59 0.33 0.47 0.56 180 140 970 MAX. 0.65 0.61 700 175 UNIT TJ = 25 °C VF TJ = 125 °C TJ = 25 °C TJ = 125 °C IR CJ Instantaneous forward voltage per diode (1) V Reverse current per diode (2) Typical junction capacitance µA mA pF Notes: (1) Pulse test: 300 µs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms Document Number: 88965 Revision: 19-May-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 New Product M6035C thru M6060C Vishay General Semiconductor THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance per diode SYMBOL RθJC M6035C M6045C 2.0 M6060C UNIT °C/W ORDERING INFORMATION (Example) PREFERRED P/N M6045C-E3/45 UNIT WEIGHT (g) 2.068 PREFERRED PACKAGE CODE 45 BASE QUANTITY 50/tube DELIVERY MODE Tube RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 80 400 60 50 40 30 20 10 0 0 25 50 75 100 125 150 175 M6035C ~ M6045C M6060C Average Forward Current (A) 70 Resistive or Inductive Load 350 300 250 200 150 100 50 0 1 TJ = TJ Max. 8.3 ms Single Half Sine-Wave Average For ward Current 10 100 Case Temperature (°C) Number of Cycles at 60 Hz Figure 1. Maximum Forward Current Derating Curve Figure 3. Maximum Non-Repetitive Peak Forward Surge Current Per Diode 25 D = 0.3 D = 0.5 100 Average Power Loss (W) 20 D = 0.2 15 D = 0.1 10 D = 1.0 Instantaneous Forward Current (A) D = 0.8 TJ = 150 °C 10 TJ = 125 °C 1 TJ = 25 °C 0.1 M6035C ~ M6045C M6060C 0.01 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 5 0 0 5 10 15 20 25 30 35 Average Forward Current (A) Instantaneous Forward Voltage (V) Figure 2. Forward Power Loss Characteristics Per Diode Figure 4. Typical Instantaneous Forward Characteristics Per Diode www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88965 Revision: 19-May-08 New Product M6035C thru M6060C Vishay General Semiconductor 1 000 000 10 100 000 TJ = 125 °C 10 000 1000 TJ = 25 °C Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (µA) TJ = 150 °C 1 100 10 M6035C ~ M6045C M6060C 10 20 30 40 50 60 70 80 90 100 1 0.1 0.1 1 10 100 Percent of Rated Peak Reverse Voltage(%) t - Pulse Duration (s) Figure 5. Typical Reverse Characteristics Per Diode Figure 7. Typical Transient Thermal Impedance Per Diode 10 000 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Junction Capacitance (pF) 1000 M6035C ~ M6045C M6060C 100 0.1 1 10 100 Reverse Voltage(V) Figure 6. Typical Junction Capacitance Per Diode PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB 0.055 (1.40) 0.047 (1.20) 0.398 (10.10) 0.382 (9.70) 0.343 (8.70) TYP. 0.150 (3.80) 0.139 (3.54) DIA. 0.114 (2.90) 0.106 (2.70) 0.154 (3.90) 0.138 (3.50) 0.331 (8.40) TYP. 0.638 (16.20) 0.598 (15.20) 0.634 (16.10) 0.618 (15.70) 1.161 (29.48) 1.106 (28.08) 0.102 (2.60) 0.087 (2.20) 0.370 (9.40) 0.354 (9.00) 0.185 (4.70) 0.169 (4.30) 0.055 (1.40) 0.049 (1.25) 0.067 (1.70) TYP. PIN 123 0.118 (3.00) TYP. 0.523 (13.28) 0.507 (12.88) 0.035 (0.90) 0.028 (0.70) 0.100 (2.54) TYP. 0.064 (1.62) 0.056 (1.42) 0.200 (5.08) TYP. 0.024 (0.60) 0.018 (0.45) Document Number: 88965 Revision: 19-May-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1