P600B

P600A thru P600M Vishay General Semiconductor General Purpose Plastic Rectifier FEATURES • Low forward voltage drop • Low leakage current • High forward current capability • High forward surge capability • Solder dip 275 °C max. 10 s, per JESD 22-B106 • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC P600 TYPICAL APPLICATIONS For use in general purpose rectification of power supplies, inverters, converters and freewheeling diodes application. PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM VF IR TJ max. 6.0 A 50 V to 1000 V 400 A 0.9 V, 1.0 V 5.0 μA 150 °C Note • These devices are not AEC-Q101 qualified. MECHANICAL DATA Case: P600, void-free molded epoxy body Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test Polarity: Color band denotes cathode end per MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TA = 60 °C, 0.375" (9.5 mm) lead length (fig. 1) TL = 60 °C, 0.125" (3.18 mm) lead length (fig. 2) IF(AV) 22 IFSM TJ, TSTG 400 - 50 to + 150 A °C SYMBOL VRRM VRMS VDC P600A 50 35 50 P600B 100 70 100 P600D 200 140 200 P600G 400 280 400 6.0 A P600J 600 420 600 P600K 800 560 800 P600M 1000 700 1000 UNIT V V V Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range Document Number: 88692 Revision: 04-Nov-09 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 1 P600A thru P600M Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage Maximum DC reverse current at rated DC blocking voltage Typical reverse recovery time Typical junction capacitance TEST CONDITIONS 6.0 A 100 A TA = 25 °C TA =100 °C IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A 4.0 V, 1 MHz VF SYMBOL P600A P600B P600D P600G 0.90 1.30 5.0 IR trr CJ 1.0 2.5 150 P600J P600K P600M UNIT 1.0 V 1.4 μA mA μs pF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance SYMBOL RθJA (1) RθJL (1) P600A P600B P600D P600G 20 °C/W 4.0 P600J P600K P600M UNIT Note (1) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5 mm) lead length, P.C.B. mounted with 1.1" x 1.1" (30 mm x 30 mm) copper pads ORDERING INFORMATION (Example) PREFERRED P/N P600J-E3/54 P600J-E3/73 UNIT WEIGHT (g) 2.1 2.1 PREFERRED PACKAGE CODE 54 73 BASE QUANTITY 800 300 DELIVERY MODE 13" diameter paper tape and reel Ammo pack packaging RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 6.0 30 Average Forward Rectified Current (A) 5.0 Average Forward Current (A) 60 Hz Resistive or Inductive Load L 25 = 0. 12 60 Hz Resistive or Inductive Load L 20 = 5" 0. (3 4.0 25 "( .1 8 m L= 15 6. 35 m ) Both Leads Attached to Heat Sinks with Length as Shown “L” 3.0 0.3 m 75 "( m ) 9.5 2.0 1.1" x 1.1" (30 mm x 30 mm) Copper Pads 1.0 Standard P.C.B. Mounting 0.375" (9.5 mm) Lead Length 0 0 20 40 60 80 100 120 140 160 180 200 10 L= mm 0.62 ) 5" (1 5 .8 m m) 5 0 0 20 40 60 80 100 120 140 160 180 200 Ambient Temperature (°C) Lead Temperature (°C) Fig. 1 - Maximum Forward Current Derating Curve Fig. 2 - Maximum Non-repetitive Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Document Number: 88692 Revision: 04-Nov-09 P600A thru P600M Vishay General Semiconductor 600 8.3 ms Single Half Sine-Wave 100 500 Instantaneous Reverse Current (μA) Peak Forward Surge Current (A) 10 TJ = 125 °C TJ = 100 °C 400 TA = 25 °C 300 TA = 150 °C 200 1 TJ = 25 °C 0.1 100 0 1 10 100 0.01 0 20 40 60 80 100 Number of Cycles at 60 Hz Percent of Rated Peak Reverse Voltage (%) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 5 - Typical Reverse Characteristics 100 100 10 TJ = 25 °C Pulse Width = 300 μs 1 % Duty Cycle Transient Thermal Impedance (°C/W) Instantaneous Forward Current (A) 10 1 1 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Fig. 4 - Typical Instantaneous Forward Characteristics Fig. 6 - Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) P600 1.0 (25.4) MIN. 0.360 (9.1) 0.340 (8.6) 0.360 (9.1) 0.340 (8.6) 0.052 (1.32) 0.048 (1.22) DIA. 1.0 (25.4) MIN. Document Number: 88692 Revision: 04-Nov-09 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1