RCWPM-1206

RCWPM (Military M/D55342) Vishay Dale Thick Film Chip Resistors, Military/Established Reliability MIL-PRF-55342 Qualified, Type RM FEATURES • Fully conforms to the requirements of MIL-PRF-55342 • Established reliability - Verified failure rate; M, P, R, S and T levels • Operating temperature range is - 55 °C to + 150 °C • 100 % Group A screening per MIL-PRF-55342 • Termination Style B - Tin/Lead wraparound over nickel barrier • For MIL-PRF-32159 zero ohm jumpers, see Vishay Dale’s RCWPM Jumper (Military M32159) data sheet STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE MODEL RCWPM-0502 RCWPM-550 RCWPM-5100 RCWPM-5150 RCWPM-7225 RCWPM-575 RCWPM-1206 RCWPM-2010 RCWPM-2512 RCWPM-1100 RCWPM-0402 RCWPM-0603 RCWPM-0302 POWER RATING MIL-PRF-55342 MIL SPEC. TERM. P70 °C W STYLE SHEET RM0502 RM0505 RM1005 RM1505 RM2208 RM0705 RM1206 RM2010 RM2512 RM1010 RM0402 RM0603 RM0302 01 02 03 04 05 06 07 08 09 10 11 12 13 B B B B B B B B B B B B B 0.05 0.125 0.20 0.15 0.225 0.15 0.25 0.80 1.0 0.50 0.05 0.10 0.04 MAX. OPERATING VOLTAGE 40 40 75 125 175 50 100 150 200 75 30 50 15 CHAR. M K, M M K, M M K, M M K, M M K, M M K, M M K, M M K, M M K, M M K, M M K, M M K, M M K, M TOLERANCE RESISTANCE % RANGE Ω ± 2 to ± 10 ± 1 to ± 10 ± 2 to ± 10 ± 1 to ± 10 ± 2 to ± 10 ± 1 to ± 10 ± 2 to ± 10 ± 1 to ± 10 ± 2 to ± 10 ± 1 to ± 10 ± 2 to ± 10 ± 1 to ± 10 ± 2 to ± 10 ± 1 to ± 10 ± 2 to ± 10 ± 1 to ± 10 ± 2 to ± 10 ± 1 to ± 10 ± 2 to ± 10 ± 1 to ± 10 ± 2 to ± 10 ± 1 to ± 10 ± 2 to ± 10 ± 1 to ± 10 ± 2 to ± 10 ± 1 to ± 10 1 to 9.1 10 to 22M 1 to 9.1 10 to 22M 1 to 5.6 5.62 to 22M 1 to 5.6 5.62 to 22M 1 to 5.6 5.62 to 22M 1 to 5.6 5.62 to 22M 1 to 5.6 5.62 to 22M 1 to 5.6 5.62 to 22M 1 to 5.6 5.62 to 22M 1 to 5.6 5.62 to 22M 1 to 9.1 10 to 22M 1 to 5.6 5.62 to 22M 1 to 9.1 10 to 22M Note • DSCC has created a series of drawings to support the need for 0201-sized product. Vishay Dale is listed as a resource on these drawing as follows: DSCC DRAWING NUMBER 07009 07010 VISHAY DALE MODEL RCWP-0201 RCWP-0201 TERM. B B POWER RATING P70 °C W 0.05 0.05 RES. RANGE Ω 47 to 1M 10 to 1M 47 to 1M 10 to 1M RES. TOL. % ± 1; ± 5 ± 1; ± 5 TEMP. COEF. ppm/°C 100 200 100 300 MAX. WORKING VOLTAGE 30 30 These drawings can be viewed at: www.dscc.dla.mil/Programs/MilSpec/listDwgs.asp?DocType=DSCCdwg www.vishay.com 130 For technical questions, contact: ff2aresistors@vishay.com Document Number: 31010 Revision: 25-Jul-08 RCWPM (Military M/D55342) Thick Film Chip Resistors, Military/Established Reliability MIL-PRF-55342 Qualified, Type RM GLOBAL PART NUMBER INFORMATION New Global Part Numbering: M55342M02B10E0RWB (preferred part number format) Vishay Dale M MIL STYLE D55342 applies to Style 07 (RM1206) only. M55342 applies to all other styles. 5 5 3 4 2 M 0 2 B 1 0 FAILURE RATE E 0 R W B SPECIAL CHARACTERISTICS K = 100 ppm M = 300 ppm SPEC SHEET TERMINATION VALUE AND STYLE TOLERANCE PACKAGING (see Standard B = Pre-tinned (see Tolerance Nickel Barrier, and Multipliers Electrical table) wraparound Specifications table) C = Non-ER M = 1.0 %/1000 h P = 0.1 %/1000 h R = 0.01 %/1000 h S = 0.001 %/1000 h T = Space Level Blank = Standard TP = Tin/Lead, (Dash Number) T/R (Full) (up to 1 digits) UL = Tin/Lead, T/R Single Lot Date Code T = Space S3 = Tin/Lead, Level (-98) T/R (1000 pieces) WB = Tin/Lead, Tray WL = Tin/Lead, Tray, Single Lot Date Code S2 = Tin/Lead, T/R (500 pieces) S6 = Tin/Lead, T/R (300 pieces) R FAILURE RATE WB PACKAGING CODE Historical Part Numbering: M55342M02B10E0R (will continue to be accepted) M55342 MIL STYLE M CHARACTERISTICS 02 SPEC SHEET B TERMINATION STYLE 10E0 VALUE AND TOLERANCE RESISTANCE TOLERANCE AND MULTIPLIERS TOLERANCE MULTIPLIER ±1% D E F Examples: ±2% G H T ±5% J K L 11D3 = 11.3 Ω ± 1 % 10E0 = 10 kΩ ± 1 % 332D = 332 Ω ± 1 % 2F21 = 2.21 MΩ ± 1 % 51G0 = 51 Ω ± 2 % 10H0 = 10 kΩ ± 2 % 33H0 = 33 kΩ ± 2 % 22T0 = 22 MΩ ± 2 % ± 10 % M N P 1 1000 1 000 000 15J0 = 15 Ω ± 5 % 10K0 = 10 kΩ ± 5 % 560K = 560 kΩ ± 5 % 8L20 = 8.2 MΩ ± 5 % 10M0 = 10 Ω ± 10 % 10N0 = 10 kΩ ± 10 % 2P70 = 2.7 MΩ ± 10 % 8P20 = 8.2 MΩ ± 10 % VALUE RANGE (Ω) 1 - 9xx 1K - 9xxK 1M - 22M Document Number: 31010 Revision: 25-Jul-08 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 131 RCWPM (Military M/D55342) Vishay Dale Thick Film Chip Resistors, Military/Established Reliability MIL-PRF-55342 Qualified, Type RM DIMENSIONS in inches [millimeters] D C B A E VISHAY DALE MODEL RCWPM-0502 RCWPM-550 RCWPM-5100 RCWPM-5150 RCWPM-7225 RCWPM-575 RCWPM-1206 RCWPM-2010 RCWPM-2512 RCWPM-1100 RCWPM-0402 RCWPM-0603 RCWPM-0302 RCWP-0201 MIL-PRF-55342 STYLE RM0502 RM0505 RM1005 RM1505 RM2208 RM0705 RM1206 RM2010 RM2512 RM1010 RM0402 RM0603 RM0302 MIL. SPEC. SHEET 01 02 03 04 05 06 07 08 09 10 11 12 13 A (Length) 0.055 ± 0.005 [1.40 ± 0.13] 0.055 ± 0.005 [1.40 ± 0.13] 0.105 ± 0.005 [2.67 ± 0.13] 0.155 ± 0.005 [3.94 ± 0.13] 0.230 ± 0.005 [5.84 ± 0.13] 0.080 ± 0.005 [2.03 ± 0.13] 0.125 ± 0.005 [3.18 ± 0.13] 0.197 ± 0.006 [5.00 ± 0.15] 0.250 ± 0.006 [6.35 ± 0.15] 0.105 ± 0.005 [2.67 ± 0.13] 0.039 ± 0.003 [0.99 ± 0.08] 0.063 ± 0.005 [1.60 ± 0.13] 0.034 ± 0.004 [0.86 ± 0.10] 0.024 ± 0.002 [0.60 ± 0.05] B (Width) 0.023 ± 0.003 [0.58 ± 0.08] 0.050 ± 0.005 [1.27 ± 0.13] 0.050 ± 0.005 [1.27 ± 0.13] 0.050 ± 0.005 [1.27 ± 0.13] 0.075 ± 0.005 [1.91 ± 0.13] 0.050 ± 0.005 [1.27 ± 0.13] 0.063 ± 0.005 [1.60 ± 0.13] 0.098 ± 0.005 [2.49 ± 0.13] 0.124 ± 0.005 [3.15 ± 0.13] 0.100 ± 0.005 [2.54 ± 0.13] 0.020 ± 0.003 [0.51 ± 0.08] 0.032 ± 0.005 [0.81 ± 0.13] 0.021 ± 0.003 [0.53 ± 0.08] 0.012 ± 0.002 [0.30 ± 0.05] C (Height) 0.015 ± 0.003 [0.38 ± 0.08] 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.013 ± 0.003 [0.33 ± 0.08] 0.018 ± 0.005 [0.46 ± 0.13] 0.015 ± 0.003 [0.38 ± 0.08] 0.009 ± 0.002 [0.23 ± 0.05] D (Top Term) 0.010 ± 0.005 [0.25 ± 0.13] 0.010 ± 0.005 [0.25 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.010 ± 0.005 [0.25 ± 0.13] 0.012 ± 0.005 [0.31 ± 0.13] 0.007 ± 0.005 [0.18 ± 0.13] 0.006 ± 0.003 [0.15 ± 0.07] E (Bottom Term) 0.015 ± 0.005 [0.38 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.010 ± 0.005 [0.25 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.008 ± 0.005 [0.20 ± 0.13] 0.006 + 0.002 - 0.004 [0.15 + 0.05 - 0.10] Rated Power in % 120 100 80 60 40 20 0 - 55 - 25 0 25 50 75 100 125 150 175 70 Ambient Temperature in °C CAGE CODE: 91637 and SH903 Derating www.vishay.com 132 For technical questions, contact: ff2aresistors@vishay.com Document Number: 31010 Revision: 25-Jul-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1