RCWPM_07

www.DataSheet4U.com RCWPM (Military M/D55342) Vishay Dale Thick Film Chip Resistors, Military/Established Reliability MIL-PRF-55342 Qualified, Type RM FEATURES • Fully conforms to the requirements of MIL-PRF-55342 • Established reliability - Verified failure rate; M, P, R, S & T levels • Operating temperature range is - 55 °C to + 150 °C • 100 % Group A screening per MIL-PRF-55342 • Termination Style B - Tin/Lead wraparound over nickel barrier STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE MODEL RCWPM-550 MIL-PRF-55342 STYLE RM0505 MIL SPEC. SHEET 02 TERM. B POWER RATING P70 °C W 0.055 MAXIMUM OPERATING VOLTAGE 40 CHAR. K, M TOLERANCE % RESISTANCE RANGE Ω 5.6 - 1M 5.62 - 1M 5.6 - 1M 5.62 - 1M 5.6 - 4.7M 5.62 - 4.75M 5.6 - 15M 5.62 - 15M 5.6 - 1M 5.62 - 1M 5.6 - 5.6M 5.62 - 5.62M 5.6 - 15M 5.62 - 15M 5.6 - 15M 5.62 - 15M 5.6 - 5.6M 5.62 -5.62M 5.6 - 1M 5.62 - 1M 5.6 - 1M 5.62 - 1M ± 2 to ± 10 ±1 ± 2 to ± 10 RCWPM-5100 RM1005 03 B 0.10 40 K, M ±1 ± 2 to ± 10 RCWPM-5150 RM1505 04 B 0.15 40 K, M ±1 ± 2 to ± 10 RCWPM-7225 RM2208 05 B 0.225 40 K, M ±1 ± 2 to ± 10 RCWPM-575 RM0705 06 B 0.10 50 K, M ±1 ± 2 to ± 10 RCWPM-1206 RM1206 07 B 0.25 100 K, M ±1 ± 2 to ± 10 RCWPM-2010 RM2010 08 B 0.80* 150 K, M ±1 ± 2 to ± 10 RCWPM-2512 RM2512 09 B 1.0* 200 K, M ±1 ± 2 to ± 10 RCWPM-1100 RM1010 10 B 0.50* 75 K, M ±1 ± 2 to ± 10 RCWPM-0402 RM0402 11 B 0.04 25 K, M ±1 ± 2 to ± 10 RCWPM-0603 RM0603 12 B 0.07 50 K, M ±1 * Power rating based on a ceramic test board, see appropriate Mil Slash Sheet for power ratings based on a fiber test board. GLOBAL PART NUMBER INFORMATION New Global Part Numbering: M55342M02B10E0RWB (preferred part numbering format) M 5 5 3 4 2 M 0 2 B 1 0 E 0 R W B MIL STYLE CHARACTERISTIC SPEC SHEET D55342 applies to K = 100 ppm (see Standard Style 07 (RM1206) M = 300 ppm Electrical only. Specifications table) M55342 applies to all other styles. TERMINATION STYLE B = Pre-tinned Nickel Barrier, wraparound VALUE & TOLERANCE (see Tolerance and Multipliers table FAILURE RATE C = Non-ER M = 1.0 %/1000 hours P = 0.1 %/1000 hours R = 0.01 %/1000 hours S = 0.001 %/1000 hours T = Space Level Historical Part Numbering: M55342M02B10E0R (will continue to be accepted) PACKAGING TP = Tin/Lead, T/R (Full) S3 = Tin/Lead, T/R (1000 pcs) WB = Tin/Lead, Tray S2 = Tin/Lead, T/R (500 pcs) S6 = Tin/Lead, T/R (300 pcs) SPECIAL Blank = Standard (Dash Number) (up to 1 digit) T = Space Level (- 98) M55342 MIL STYLE M CHARACTERISTIC 02 SPEC SHEET B TERMINATION STYLE 10E0 VALUE & TOLERANCE R FAILURE RATE WB PACKAGING CODE www.vishay.com 90 For technical questions, contact: ff2bresistors@vishay.com Document Number: 31010 Revision: 30-Aug-06 www.DataSheet4U.com RCWPM (Military M/D55342) Thick Film Chip Resistors, Military/Established Reliability MIL-PRF-55342 Qualified, Type RM Vishay Dale DIMENSIONS in inches [millimeters] D B A C E DIMENSIONS in inches [MILLIMETERS] VISHAY DALE MODEL RCWPM-550 RCWPM-5100 RCWPM-5150 RCWPM-7225 RCWPM-575 RCWPM-1206 RCWPM-2010 RCWPM-2512 RCWPM-1100 RCWPM-0402 RCWPM-0603 MIL-PRF-55342 STYLE RM0505 RM1005 RM1505 RM2208 RM0705 RM1206 RM2010 RM2512 RM1010 RM0402 RM0603 MIL. SPEC. SHEET 02 03 04 05 06 07 08 09 10 11 12 A (Length) 0.055 ± 0.005 [1.40 ± 0.13] 0.105 ± 0.005 [2.67 ± 0.13] 0.155 ± 0.005 [3.94 ± 0.13] 0.230 ± 0.005 [5.84 ± 0.13] 0.080 ± 0.005 [2.03 ± 0.13] 0.125± 0.005 [3.18 ± 0.13] 0.197 ± 0.006 [5.00 ± 0.15] 0.250 ± 0.006 [6.35 ± 0.15] 0.105 ± 0.005 [2.67 ± 0.13] 0.039 ± 0.003 [0.99 ± 0.08] 0.063 ± 0.005 [1.60 ± 0.13] B (Width) 0.050 ± 0.005 [1.27 ± 0.13] 0.050 ± 0.005 [1.27 ± 0.13] 0.050 ± 0.005 [1.27 ± 0.13] 0.075 ± 0.005 [1.91 ± 0.13] 0.050 ± 0.005 [1.27 ± 0.13] 0.063 ± 0.005 [1.60 ± 0.13] 0.098 ± 0.005 [2.49 ± 0.13] 0.124 ± 0.005 [3.15 ± 0.13] 0.100 ± 0.005 [2.54 ± 0.13] 0.020 ± 0.003 [0.51 ± 0.08] 0.032 ± 0.005 [0.81 ± 0.13] C (Height) 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.013 ± 0.003 [0.33 ± 0.08] 0.018 ± 0.005 [0.46 ± 0.13] D (Top Term) 0.010 ± 0.005 [0.25 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.010 ± 0.005 [0.25 ± 0.13] 0.012 ± 0.005 [0.31 ± 0.13] E (Bottom Term) 0.015 ± 0.005 [0.38 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.020 ± 0.005 [0.51 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] 0.010 ± 0.005 [0.25 ± 0.13] 0.015 ± 0.005 [0.38 ± 0.13] RATED POWER IN % 120 100 80 60 40 CAGE CODE: 91637 and SH903 20 0 - 55 - 25 0 25 50 Derating 75 100 125 150 175 70 AMBIENT TEMERATURE IN °C RESISTANCE TOLERANCE AND MULTIPLIERS TOLERANCE ±1% D E F Examples: ±2% G H T ±5% J K L 11D3 = 11.3 Ω ± 1 % 10E0 = 10 kΩ ± 1 % 332D = 332 Ω ± 1 % 2F21 = 2.21 MΩ ± 1 % 51G0 = 51 Ω ± 2 % 10H0 = 10 kΩ ± 2 % 33H0 = 33 kΩ ± 2 % 22T0 = 22 MΩ ± 2 % ± 10 % M N P MULTIPLIER 1 1000 1 000 000 15J0 = 15 Ω ± 5 % 10K0 = 10 kΩ ± 5 % 560K = 560 kΩ ± 5 % 8L20 = 8.2 MΩ ± 5 % 10M0 = 10 Ω ± 1 0% 10N0 = 10 kΩ ± 10 % 2P70 = 2.7 MΩ ± 10 % 8P20 = 8.2 MΩ ± 10 % VALUE RANGE (OHMS) 1 - 9xx 1k - 9xxk 1M - 10M Document Number: 31010 Revision: 30-Aug-06 For technical questions, contact: ff2bresistors@vishay.com www.vishay.com 91 www.DataSheet4U.com Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1