V60120C

New Product V60120C Vishay General Semiconductor Dual High-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low VF = 0.41 V at IF = 5 A TMBS ® TO-220AB FEATURES • Trench MOS Schottky technology • Low forward voltage drop, low power losses • High efficiency operation • Low thermal resistance 2 1 3 • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in high frequency inverters, switching power supplies, freewheeling diodes, OR-ing diode, dc-to-dc converters and reverse battery protection. MECHANICAL DATA Case: TO-220AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum PIN 1 PIN 3 PIN 2 CASE PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM VF at IF = 30 A TJ max. 2 x 30 A 120 V 300 A 0.71 V 150 °C MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum average forward rectified current (Fig. 1) Peak forward surge current 10 ms single half sine-wave superimposed on rated load per diode Peak repetitive reverse current per diode at tp = 2 µs, 1 kHz Voltage rate of change (rated VR) Operating junction and storage temperature range per device per diode SYMBOL VRRM IF(AV) IFSM IRRM dV/dt TJ, TSTG V60120C 120 60 30 300 1.0 10 000 - 40 to + 150 V/µs °C A UNIT V Document Number: 88976 Revision: 19-May-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 New Product V60120C Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Breakdown voltage TEST CONDITIONS IR = 1.0 mA IF = 5 A IF = 1 5 A IF = 3 0 A IF = 5 A IF = 1 5 A IF = 3 0 A V R = 90 V Reverse current at rated VR per diode (2) SYMBOL VBR TYP. 120 (minimum) 0.48 0.66 0.88 MAX. 0.95 0.75 500 45 UNIT TA = 25 °C TA = 25 °C Instantaneous forward voltage per diode (1) VF TA = 125 °C TA = 25 °C TA = 125 °C TA = 25 °C TA = 125 °C V 0.41 0.58 0.71 14 11 µA mA µA mA IR VR = 120 V Notes: (1) Pulse test: 300 µs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms 40 15 THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance per diode SYMBOL RθJC V60120C 2.2 UNIT °C/W ORDERING INFORMATION (Example) PACKAGE TO-220AB PREFERRED P/N V60120C-E3/4W UNIT WEIGHT (g) 1.89 PACKAGE CODE 4W BASE QUANTITY 50/tube DELIVERY MODE Tube RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 70 Resistive or Inductive Load 30 D = 0.8 D = 0.5 25 Average Forward Current (A) 60 Average Power Loss (W) D = 0.3 20 D = 0.2 D = 0.1 D = 1.0 50 40 30 20 10 0 0 25 50 75 100 125 150 15 10 T 5 D = tp/T 0 0 5 10 15 20 25 30 35 tp Case Temperature (°C) Average Forward Current (A) Figure 1. Forward Current Derating Curve Figure 2. Forward Power Loss Characteristics Per Diode www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88976 Revision: 19-May-08 New Product V60120C Vishay General Semiconductor 350 10 000 TJ = TJ max. 8.3 ms Single Half Sine-Wave TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Peak Forward Surge Current (A) 300 250 200 150 100 50 0 1 Junction Capacitance (pF) 10 100 1000 100 0.1 1 10 100 Number of Cycles at 60 Hz Reverse Voltage (V) Figure 3. Maximum Non-Repetitive Peak Forward Surge Current Per Diode Figure 6. Typical Junction Capacitance Per Diode 100 10 Transient Thermal Impedance (°C/W) Instantaneous Forward Current (A) Junction to Case TA = 150 °C TA = 125 °C 10 1 TA = 25 °C 1 0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 0.1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Figure 4. Typical Instantaneous Forward Characteristics Per Diode Figure 7. Typical Transient Thermal Impedance Per Diode 100 Instantaneous Reverse Current (mA) TA = 150 °C 10 TA = 125 °C 1 0.1 TA = 25 °C 0.01 0.001 10 20 30 40 50 60 70 80 90 100 Percent of Rated Peak Reverse Voltage (%) Figure 5. Typical Reverse Characteristics Per Diode Document Number: 88976 Revision: 19-May-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 New Product V60120C Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) 0.148 (3.74) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 0.635 (16.13) 0.625 (15.87) 3 0.603 (15.32) 0.573 (14.55) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.110 (2.79) 0.100 (2.54) 0.560 (14.22) 0.530 (13.46) 0.035 (0.90) 0.028 (0.70) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 1 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) PIN 2 www.vishay.com 4 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88976 Revision: 19-May-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1