VLMY31J1K2-GS18

VLMY31.. Vishay Semiconductors Standard SMD LED PLCC2 FEATURES Lead (Pb)-free product - RoHS compliant SMD LED with exceptional brightness Luminous intensity categorized e3 Compatible with automatic placement equipment • EIA and ICE standard package • Compatible with IR reflow, vapor phase and wave solder processes according to CECC 00802 and J-STD-020C • Available in 8 mm tape • Low profile package • Non-diffused lens: excellent for coupling to light pipes and backlighting • Low power consumption • Luminous intensity ratio in one packaging unit IVmax/IVmin ≤ 1.6 • Lead (Pb)-free device • Preconditioning: acc. to JEDEC level 2 a • ESD withstand voltage: up to 2 kV according to JESD22-A114-B APPLICATIONS • Automotive: Backlighting in dashboards and switches • Telecommunication: Indicator and backlighting in telephone and fax • Indicator and backlight for audio and video equipment • Indicator and backlight in office equipment • Flat backlight for LCDs, switches and symbols • General use • • • • 94 8553 DESCRIPTION This device has been designed for applications requiring narrow brightness and color selection. The package of this device is the PLCC-2. It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled up with clear epoxy. PRODUCT GROUP AND PACKAGE DATA • Product group: LED • Package: SMD PLCC-2 • Product series: standard • Angle of half intensity: ± 60° PARTS TABLE PART VLMY31J1K2-GS08 VLMY31J1K2-GS18 VLMY31J1L2-GS08 VLMY31J1L2-GS18 VLMY31K1L2-GS08 VLMY31K1L2-GS18 COLOR, LUMINOUS INTENSITY Yellow, IV = (4.5 to 11.2) mcd Yellow, IV = (4.5 to 11.2) mcd Yellow, IV = (4.5 to 18) mcd Yellow, IV = (4.5 to 18) mcd Yellow, IV = (7.1 to 18) mcd Yellow, IV = (7.1 to 18) mcd TECHNOLOGY GaAsP on GaP GaAsP on GaP GaAsP on GaP GaAsP on GaP GaAsP on GaP GaAsP on GaP Document Number 81326 Rev. 1.1, 06-Sep-07 www.vishay.com 1 VLMY31.. Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS1) VLMY31.. PARAMETER Reverse voltage2) DC Forward current Surge forward current Power dissipation Junction temperature Operating temperature range Storage temperature range Soldering temperature Thermal resistance junction/ ambient t≤5s mounted on PC board (pad size > 16 mm2) Tamb ≤ 60 °C tp ≤ 1 0 μ s TEST CONDITION SYMBOL VR IF IFSM PV Tj Tamb Tstg Tsd RthJA VALUE 6 30 0.5 100 100 - 40 to + 100 - 40 to + 100 260 400 UNIT V mA A mW °C °C °C °C K/W Note: 1) Tamb = 25 °C, unless otherwise specified 2) Driving the LED in reverse direction is suitable for short term application OPTICAL AND ELECTRICAL CHARACTERISTICS1) VLMY31.., YELLOW PARAMETER Luminous intensity Dominant wavelength Peak wavelength Angle of half intensity Forward voltage Reverse voltage Junction capacitance TEST CONDITION IF = 10 mA IF = 10 mA IF = 10 mA IF = 10 mA IF = 20 mA IR = 10 μA VR = 0, f = 1 MHz PART VLMY31J1K2 VLMY31J1L2 VLMY31K1L2 SYMBOL IV IV IV λd λp ϕ VF VR Cj 6 MIN 4.5 4.5 7.1 581 588 590 ± 60 2.1 15 15 2.8 TYP. MAX 11.2 18 18 594 UNIT mcd mcd mcd nm nm deg V V pF Note: 1) Tamb = 25 °C, unless otherwise specified LUMINOUS INTENSITY CLASSIFICATION GROUP J1 J2 K1 K2 L1 L2 LUMINOUS INTENSITY (MCD) MIN. 4.5 5.6 7.10 9.00 11.20 14.00 MAX. 5.6 7.1 9.00 11.20 14.00 18.00 COLOR CLASSIFICATION DOMINANT WAVELENGTH (NM) GROUP MIN. 1 2 3 4 5 6 581 583 585 587 589 591 YELLOW MAX. 584 586 588 590 592 594 Note: Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above Type Numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, singe wavelength groups will not be orderable. www.vishay.com 2 Note: Wavelengths are tested at a current pulse duration of 25 ms and an accuracy of ± 1 nm. CROSSING TABLE VISHAY VLMY31J1K2 VLMY31J1L2 VLMY31K1L2 OSRAM LYT670-J1K2 LYT670-J1L2 LYT670-K1L2 Document Number 81326 Rev. 1.1, 06-Sep-07 VLMY31.. Vishay Semiconductors TYPICAL CHARACTERISTICS Tamb = 25 °C, unless otherwise specified) 60 1.2 IV rel - Relative Luminous Intensity yellow 1.0 0.8 0.6 0.4 0.2 0 550 95 10039 IF - Forward Current (mA) 50 40 30 20 10 0 0 20 40 60 80 100 570 590 610 630 650 95 10905 Tamb - Ambient Temperature (°C) λ - Wavelength (nm) Figure 1. Forward Current vs. Ambient Temperature Figure 4. Relative Luminous Intensity vs. Wavelength 10000 t p /T = 0.005 Tamb < 60 °C 0.01 0.02 0.05 100 yellow I F - Forward Current (mA) 1000 - Forward Current (mA) I F 10 100 0.2 0.5 DC 1 10 0.1 1 0.01 95 9985 0.1 0.1 1 10 100 95 9987 0 1 2 3 4 5 t p - Pulse Length (ms) V F - Forward Voltage (V) Figure 2. Forward Current vs. Pulse Length Figure 5. Forward Current vs. Forward Voltage 0° 10° 20° IV rel - Relative Luminous Intensity I v rel - Relative Luminous Intensity 30° 10 yellow 40° 1.0 0.9 0.8 0.7 50° 60° 70° 80° 0.6 0.4 0.2 0 0.2 0.4 0.6 1 0.1 0.01 95 10319 1 95 9999 10 I F - Forward Current (mA) 100 Figure 3. Rel. Luminous Intensity vs. Angular Displacement Figure 6. Relative Luminous Intensity vs. Forward Current Document Number 81326 Rev. 1.1, 06-Sep-07 www.vishay.com 3 VLMY31.. Vishay Semiconductors 2.4 I v rel - Relative Luminous Intensity yellow 2.0 1.6 1.2 0.8 0.4 0 95 10260 2.0 I v rel - Relative Luminous Intensity yellow 1.6 1.2 0.8 0.4 0 10 1 20 0.5 50 0.2 100 0.1 200 0.05 500 I F (mA) 0.02 tp /T 0 95 9992 20 40 60 80 100 T amb - Ambient Temperature (°C) Figure 7. Rel. Lumin. Intensity vs. Forw. Current/Duty Cycle Figure 8. Rel. Luminous Intensity vs. Ambient Temperature PACKAGE DIMENSIONS in millimeters 3.5 ± 0.2 1.75 ± 0.10 technical drawings according to DIN specifications 0.9 Mounting Pad Layout Pin identification 1.2 area covered with solder resist 2.6 (2.8) + 0.15 2.2 C A 2.8 4 1.6 (1.9) ? 2.4 3 + 0.15 Drawing-No.: 6.541-5025.01-4 Issue: 8; 22.11.05 95 11314-1 www.vishay.com 4 4 Document Number 81326 Rev. 1.1, 06-Sep-07 VLMY31.. Vishay Semiconductors METHOD OF TAPING/POLARITY AND TAPE AND REEL SMD LED (VLM.3 - SERIES) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. REEL PACKAGE DIMENSION IN MM FOR SMD LEDS, TAPE OPTION GS18 (= 8000 PCS.) PREFERRED 120° 10.4 8.4 4.5 3.5 Adhesive Tape Identification Label: Vishay Type Group Tape Code Production Code Quantity 2.5 1.5 13.00 12.75 62.5 60.0 Blister Tape 321 329 14.4 max. 18857 Figure 11. Reel Dimensions - GS18 Component Cavity 94 8670 SOLDERING PROFILE TAPING OF VLM.3... 3.5 3.1 2.2 2.0 IR Reflow Soldering Profile for lead (Pb)-free soldering Preconditioning acc. to JEDEC Level 2a 300 250 Temperature (°C) 200 max. 30 s 150 max. 120 s 100 50 max. ramp up 3 °C/s max. ramp down 6 °C/s max. 100 s 255 °C 240 °C 217 °C max. 260 °C 245 °C 5.75 5.25 3.6 3.4 1.85 1.65 4.0 3.6 8.3 7.7 1.6 1.4 4.1 3.9 2.05 1.95 4.1 3.9 0.25 0 0 50 100 150 Time (s) 200 250 300 19885 94 8668 max. 2 cycles allowed Figure 9. Tape Dimensions in mm for PLCC-2 Figure 12. Vishay Lead (Pb)-free Reflow Soldering Profile (acc. to J-STD-020C) TTW Soldering 300 250 Temperature (°C) 200 150 100 50 2 K/s forced cooling 0 0 50 100 Time (s) 150 200 250 ca. 5 K/s 235 °C...260 °C first wave ca. 200 K/s 100 °C...130 °C second wave ca. 2 K/s full line: typical dotted line: process limits 5s (acc. to CECC00802) 948626-1 REEL PACKAGE DIMENSION IN MM FOR SMD LEDS, TAPE OPTION GS08 (= 1500 PCS.) 120° 10.0 9.0 Lead Temperature 4.5 3.5 2.5 1.5 13.00 12.75 63.5 60.5 Identification Label: Vishay Type Group Tape Code Production Code Quantity Figure 13. Double Wave Soldering of Opto Devices (all Packages) 180 178 14.4 max. 94 8665 Figure 10. Reel Dimensions - GS08 Document Number 81326 Rev. 1.1, 06-Sep-07 www.vishay.com 5 VLMY31.. Vishay Semiconductors BAR CODE PRODUCT LABEL 106 A H VISHAY 37 B C D E F G 20126 A) Type of componenent B) Manufacturing plant C) SEL - selection code (bin): e.g.: J1 = code for luminous Intensity group 3 = Code for color group D) Date code year/week E) Day code (e.g. 1: Monday) F) Batch no. G) Total quantity H) Company code RECOMMENDED METHOD OF STORAGE Dry box storage is recommended as soon as the aluminium bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: • Storage temperature 10 °C to 30 °C • Storage humidity ≤ 60 % RH max. After more than 672 h under these conditions moisture content will be too high for reflow soldering. In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: 192 h at 40 °C + 5 °C/ - 0 °C and < 5 % RH (dry air/ nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags. LEVEL This bag contains MOISTURE –SENSITIVE DEVICES CAUTION DRY PACKING The reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. 2a 1. Shelf life in sealed bag 12 months at