VSFS22960GLCZVSDE

SATA 6Gb/s 2.5” SSD Manual The SATA SSD is a non-volatile, solid-state storage device. With its Serial ATA interface and industry-standard form factors, it is a drop in replacement for hard disk drives. The SSD delivers extremely high levels of performance, reliability and ruggedness for I/O intensive or environmentally challenging applications. Manual PSFS22xxxxLxxx_SM863A Revision A www.vikingtechnology.com 3/16/2017 Viking Technology Page 1 of 25 Revision History Date 3/16/17 Manual PSFS22xxxxLxxx_SM863A Revision A www.vikingtechnology.com Revision A Description Initial release modified from PSFS22xxxGLxxx_F but change PN table, TLC to MLC, performance, latency, QOS, IOPS Consistency, power consumption, SPOR , TBW and DWPD. Remove 120GB. Checked by 3/16/2017 Viking Technology Page 2 of 25 Legal Information Legal Information Copyright© 2017 Sanmina Corporation. All rights reserved. The information in this document is proprietary and confidential to Sanmina Corporation. No part of this document may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from Sanmina. Sanmina reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of Sanmina to provide notification of such revision or change. Sanmina provides this documentation without warranty, term or condition of any kind, either expressed or implied, including, but not limited to, expressed and implied warranties of merchantability, fitness for a particular purpose, and noninfringement. While the information contained herein is believed to be accurate, such information is preliminary, and should not be relied upon for accuracy or completeness, and no representations or warranties of accuracy or completeness are made. In no event will Sanmina be liable for damages arising directly or indirectly from any use of or reliance upon the information contained in this document. Sanmina may make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time. Sanmina, Viking Technology, Viking Modular Solutions, and logo are trademarks of Sanmina Corporation. Other company, product or service names mentioned herein may be trademarks or service marks of their respective owners. Manual PSFS22xxxxLxxx_SM863A Revision A www.vikingtechnology.com 3/16/2017 Viking Technology Page 3 of 25 Ordering Information: 2.5” SSD Solid-State Drive Application Useable Capacity 1 (GB) Temperature Range Part Numbers SATA Interface VSFS22240GLCHVSME SATA 6GB Enterprise 240 GB (0 to +70'c) VSF22480GLCHVSME SATA 6GB Enterprise 480 GB (0 to +70'c) VSFS22960GLCZVSDE SATA 6GB Enterprise 960 GB (0 to +70'c) VSFS221T92LCFVSME SATA 6GB Enterprise 1920 GB (0 to +70'c) VSFS223T84LCGVSME SATA 6GB Enterprise 3840 GB (0 to +70'c) NAND Samsung V3 VNAND, MLC Samsung V3 VNAND, MLC Samsung V3 VNAND, MLC Samsung V3 VNAND, MLC Samsung V3 VNAND, MLC  Usable capacity based on specification LBA1-03a and level of over-provisioning applied to wear leveling, bad sectors, index tables etc.  SSD’s ship unformatted from the factory unless otherwise requested.  1 GB = 1,000,000,000 Byte  One Sector = 512 Byte.  “y’ specifies flash capacity code  xx is a wild card to indicate customer specific BOM and/or manufacturing location  SSD drive part numbers with an E suffix (VSxxxxxxxxxE) are self-encrypting drives (SED) Enterprise SSD – An Enterprise SSD contains hardware and firmware that detect and manage power failures. This allows the drive to flush the controller cache and harden data to NAND flash. No data is lost or corrupted. Manual PSFS22xxxxLxxx_SM863A Revision A www.vikingtechnology.com 3/16/2017 Viking Technology Page 4 of 25 Table of Contents 1 GENERAL DESCRIPTION 8 1.1 FEATURES 8 1.2 DRIVE CONFIGURATION 8 1.3 PERFORMANCE SPECIFICATIONS 1.4 RELIABILITY SPECIFICATIONS 8 1.5 ENVIRONMENTAL SPECIFICATIONS 9 1.6 POWER REQUIREMENTS 9 1.7 PHYSICAL DIMENSION 9 2 8 2 MECHANICAL SPECIFICATION 10 3 PRODUCT SPECIFICATIONS 11 3.1 System Interface and Configuration 11 3.2 System Performance 11 3.3 Drive Capacity 12 3.4 Operating Voltage 12 3.5 System Power Consumption 12 3.6 System Reliability 13 3.7 Environmental Specifications 13 3.8 IOPS Consistency 13 3.9 Latency 14 3.10 Quality of Service (QoS) 14 4 4.1 ELECTRICAL INTERFACE SPECIFICATION Serial ATA Interface Connector Manual PSFS22xxxxLxxx_SM863A Revision A www.vikingtechnology.com 15 15 3/16/2017 Viking Technology Page 5 of 25 4.2 5 Pin Assignments 16 COMMAND DESCRIPTIONS 17 5.1 Supported ATA Commands 17 5.2 Individual Attribute Data Structure 18 6 SPOR SPECIFICATION (SUDDEN POWER OFF AND RECOVERY) 20 6.1 Data Recovery in Sudden Power Off 20 6.2 Time to Ready Sequence 20 7 7.1 8 8.1 9 DATA SECURITY Encrytion PRODUCT COMPLIANCE Product Regulatory Compliance and Certifications IDENTIFY DEVICE DATA 21 21 21 21 22 9.1 Identify Device Data 22 10 REFERENCES 25 Manual PSFS22xxxxLxxx_SM863A Revision A www.vikingtechnology.com 3/16/2017 Viking Technology Page 6 of 25 Table of Tables Table 2-1: Physical Dimensions and Weight ________________________________________ 10 1 Table 3-1: Sequential Read / Write and Sustained Random Read / Write Performance ______ 11 1, 2 Table 3-2: User Capacity and LBA Addressable Sectors _____________________________ 12 Table 3-3: Operating Voltage ____________________________________________________ 12 Table 3-4: Power Consumption __________________________________________________ 12 Table 3-5: TBW, MTBF, UBER Specifications _______________________________________ 13 Table 3-6: Environmental Specifications ___________________________________________ 13 Table 3-7: IOPS Consistency ____________________________________________________ 13 Table 3-8: Latency ____________________________________________________________ 14 Table 4-1: Pin Assignments_____________________________________________________ 16 Table 5-1: Supported ATA Commands Summary ____________________________________ 17 Table 5-2: Attribute Entry in Device Attribute Data Structure ___________________________ 18 1 Table 5-3: S.M.A.R.T. Attributes _________________________________________________ 19 Table 6-1: Device Ready Time for Normal Read/Write after Sudden Power off _____________ 20 Table 8-1: Standards Reference _________________________________________________ 21 Table 9-1: List of Device Identification _____________________________________________ 22 Table of Figures Figure 2-1: Physical Dimension __________________________________________________ 10 Figure 4-1: Layout of Drive Connector: AMPHENOL, SATA-001-0009-1-TR _______________ 15 Figure 6-1: Time to Ready Sequence______________________________________________ 20 Manual PSFS22xxxxLxxx_SM863A Revision A www.vikingtechnology.com 3/16/2017 Viking Technology Page 7 of 25 1 General Description 1.1 FEATURES               High-Speed 8 Channel 8 Way Architecture Samsung Triple 500MHz Cortex-R Core Controller Samsung V3 NAND Flash Memory Up to 2GB LPDDR3 DRAM Buffer Memory Serial ATA 6.0Gbps Interface Fully complies with Serial ATA 3.0 Standard ATA Security Mode feature set ATA Host Protected Area feature set Support NCQ (Up to 32 depth) Command Set Support TRIM Command Asynchronous Signal Recovery End-to-End Data Protection AES 256-bit Encryption RoHS Compliant 1.2 DRIVE CONFIGURATION     Form Factor Interface Buffer DRAM Size Bytes per Sector 2.5” SATA 6.0 Gbps 512 Megabytes 512 Bytes 1.3 PERFORMANCE SPECIFICATIONS2     Data Transfer Rate Sequential Read (128KB) Sequential Write (128KB) Random Read (4KB) Random Write (4KB) IOPS Consistency (Read/Write @4KB) Average Latency (Read/Write @4KB, QD32 Avg.) Quality of Service(99.99%) Read (4KB, QD=1) Write (4KB, QD=1) Up to 510 MB/s Up to 485 MB/s Up to 95 KIOPS Up to 28 KIOPS 99% / 97% 110 us / 35 us 0.16 ms 0.15 ms 1.4 RELIABILITY SPECIFICATIONS   Non-recoverable Read Error MTBF Manual PSFS22xxxxLxxx_SM863A Revision A www.vikingtechnology.com 1 sector per 1017 bits read 2,000,000 hours 3/16/2017 Viking Technology Page 8 of 25 1.5 ENVIRONMENTAL SPECIFICATIONS     Temperature Operating3 Non-operating Humidity (on-condensing) Non-operating Linear Shock (1/2 sine pulse) Non-operating, 0.5ms Vibration (20min /axis on 3 axes) Non-Operating (10 ~ 2,000 Hz, Sweep Sine) 0 ~ 70 °C -40 ~ 85 °C 5 ~ 95 % 1,500 G 20 G 1.6 POWER REQUIREMENTS      Supply Voltage Voltage Ripple/Noise (Max.) Active4 (Read) Active (Write) Idle5 (Typical) +5V ± 5% 100 mV p-p 2.5 W RMS 3.0 W RMS 1.3 W 1.7 PHYSICAL DIMENSION     Width Depth Height Weight 100.20 ± 0.25 mm 69.85 ± 0.25 mm 6.80 ± 0.20 mm Up to 60 g NOTES: Specifications are subject to change without notice. 1) 1MB = 1,000,000 Bytes, 1GB = 1,000,000,000 Bytes, Unformatted Capacity. User accessible capacity may vary depending on operating environment and formatting. 2) Performance measured using IOMeter 2006 with queue depth 32. Measurements are performed on whole LBA range. Write cache enabled. Performance varies on capacity 3) Tc : Case Temperature 4) Active Read power is measured on 4 KB random read with 1920 GB density. Active Write power is measured on 128 KB sequential write with 1920 GB density. 5) Idle power is measured on 1920 GB density with DIPM off. Manual PSFS22xxxxLxxx_SM863A Revision A www.vikingtechnology.com 3/16/2017 Viking Technology Page 9 of 25 2 Mechanical Specification Table 2-1: Physical Dimensions and Weight Capacity (GB) 120 / 240 / 480 / 960 / 1,920 Height (mm) 6.80 · 0.20 Width (mm) 69.85 · 0.25 Length (mm) 100.20 · 0.25 Weight (gram) 60 g Figure 2-1: Physical Dimension Manual PSFS22xxxxLxxx_SM863A Revision A www.vikingtechnology.com 3/16/2017 Viking Technology Page 10 of 25 3 Product Specifications 3.1 System Interface and Configuration    Burst read / write rate is 600 MB/sec (6 Gb/s) Fully compatible with ATA/ATAPI-7 Standard Compatible with ATA/ATAPI-8 Mandatory Command 3.2 System Performance Table 3-1: Sequential Read / Write and Sustained Random Read / Write Performance1 240 GB 480 GB 960 GB 1,920 GB Sequential Read Sector (128 KB) 410 MB/s 510 MB/s 510 MB/s 510 MB/s Sequential Write Sector (128 KB) 485MB/s 485 MB/s 485 MB/s 485 MB/s Random Read IOPS (8 KB) 50K IOPS 55K IOPS 55K IOPS 55K IOPS Random Write IOPS (8 KB) 5K IOPS 9K IOPS 12K IOPS 13K IOPS Random Read IOPS (4 KB) 90K IOPS 95K IOPS 95K IOPS 95K IOPS Random Write IOPS (4 KB) 10K IOPS 19K IOPS 25K IOPS 28K IOPS Read / Write NOTES: 1. Actual performance may vary depending on use conditions and environment. Performance measured using IOMeter 2006 with queue depth 32, C216 Intel SATA 6G port. 2) Measurements are performed on whole LBA range. 3) Write cache enabled. 4) 1 MB/sec = 1,048,576 bytes/sec was used in sequential performance. Manual PSFS22xxxxLxxx_SM863A Revision A www.vikingtechnology.com 3/16/2017 Viking Technology Page 11 of 25 3.3 Drive Capacity Table 3-2: User Capacity and LBA Addressable Sectors1, 2 User-Addressable Sectors 240 GB 480 GB 960 GB 1,920 GB 468,862,128 937,703,088 1,875,385,008 3,750,748,848 Bytes per Sector 512 bytes NOTE: 1. Megabyte (MB) = 1 Million bytes; 1 Gigabyte (GB) = 1 Billion bytes 2. Actual usable capacity may be less (due to formatting, partitioning, operating system, applications or otherwise). 3.4 Operating Voltage Table 3-3: Operating Voltage Item Allowable voltage Requirements 5.0 V + 5% Allowable noise / ripple 100 mV p-p or less 1 Inrush Current 1.0A,