3M™ MetPak™ CP2 Press-Fit Header
2 mm Type C, 55 Signal Contacts, Left Guidance
CP2 Series
• 25 mm basic system unit
• CompactPCI® combines the benefits of PCI
desktop architecture with the ruggedness of the 3U
and 6U IEEE Eurocard form factor popularized by
the VME bus
• Designed according to IEC 61076-4-101 and IEC
917 standards
• 2 mm grid spacing allows for high signal density at
low cost
• “Eye of the Needle” compliant pin press-fit design
reduces manufacturing time and cost
• Feed through termination available for midplane
applications
• Additional grounding rows available for improved
ground bounce and EMI immunity
• See Regulatory Information Appendix (RIA)
for chemical compliance information
Date Modified: April 11, 2007
TS-2034-04
Sheet 1 of 4
Physical
Insulation
Material:
Insulation Flammability:
Contact
Material:
Plating:
Glass Filled Polyester (PBT)
UL 94 V-0
Copper Alloy
See Ordering Information
Mechanical
Mating Force: 0.75 N/contact maximum
Withdrawal Force: 0.15 N/contact minimum
Electrical
Insulation Resistance: 10G Ω (Minimum)
Current Ratings: 1A at +70°C
Test Voltage: 750 VAC
Environmental
Temperature Ratings: -55°C to +125°C
PCB Data
Recommended PCB hole platings:
PCB thickness:
Press-In Force:
Retention Force:
UL File No.: E68080
3
Interconnect Solutions
http://www.3M.com/interconnects/
Cu: .0250 - .050 mm [.001 - .002 in.] and Sn or Sn/Pb:
很抱歉,暂时无法提供与“CP2-HC055-E1-FJ”相匹配的价格&库存,您可以联系我们找货
免费人工找货