CP2-HC055-E1-KR

3M™ CP2 Press-Fit Header 2 mm Type C, 55 Signal Contacts, Left Guidance CP2 Series • 25 mm basic system unit • 2 mm grid spacing allows for high signal density at low cost • “Eye of the Needle” compliant pin press-fit design helps reduce manufacturing time and cost • Three contact mating levels for Early Mate Late Break or “Hot Swap” applications reduces manufacturing time and cost • Feed through termination available for midplane applications • Additional grounding rows available for improved ground bounce and EMI immunity • Mates with 5 row 3M™ HSHM, UHM and CP2 Sockets • End to end stackable with 5 row 3M™ HSHM, HM and CP2 Headers • See the Regulatory Information Appendix (RIA) in the “RoHS compliance” section of www.3Mconnectors.com for compliance information (RIA E1 & C1 apply) Date Modified: July 16, 2015 TS-2270-C  Sheet 1 of 3 Physical Insulation: Material: Glass Filled Polyester (PBT) Flammability: UL94V-0 Contact: Material: Copper Alloy Plating: See Ordering Information Mechanical Mating Force: Withdrawal Force: Mating and Un-mating Operations Application: ≤0.75N/PIN ≥0.15N/PIN 200 for KR plating This module is not suitable for stand-alone use. (Refer to IEC-61076-4-101) Electrical Current Rating: Contact Resistance: Insulation Resistance: Test Voltage: 1.0 Amperes at 70°C with all contacts powered ≤ 20 mΩ ≥ 10,000 MΩ 750 VACRMS Environmental Temperature Ratings: -55˚C to +125˚C PCB Data Recommended PCB Plated Through Hole: Ө 0.6 ± 0.05 mm Drill hole diameter Ө 0.7 ± 0.02 mm Hole platings Cu 25~50 μm, Sn