FDST-08-D-08-A-12-0200

3M™ Fiber Dome Stubbed Terminal FDST 08 Designed for the 3M™ External Cable Assembly Module (ECAM) FD Factory Terminated Fiber Drop or Field Terminated Drops The compact 3M™ Fiber Dome Stubbed Terminal FDST 08 is designed to be deployed in outside plant FTTP, ITS, DAS, and mobile backhaul networks. The reenterable hermetically sealed fiber dome terminal can be deployed in aerial, buried 3M™ Fiber Dome Stubbed Terminal FDST 08 with the 3M™ External Cable Assembly Module (ECAM) FD Factory Terminated Fiber Drop above-grade and buried below-grade applications. The FDST 08 terminal accommodates 4, 6 or 8 3M™ External Cable Assembly Module (ECAM) FD Factory Terminated SC/APC or SC/UPC Fiber Drops or field terminated drops. In the FDST 08 terminal, the drop cable is terminated inside the terminal. This helps to reduce the potential for connector contamination. The FDST 08 terminal features a fixed O-ring sealing system along with an innovative latching mechanism. This combination provides simple, virtually errorfree terminal sealing and re-entry. Also, the re-entry feature allows easy access to 3M™ External Cable Assembly Module (ECAM) FD Factory Terminated Fiber Drop clean and repair connectors and replace the terminal or terminal tail in the event that either of these are damaged. The FDST 08 terminals are Rural Development (RUS) listed. Field Drop Terminations For field terminated drop terminations, the FDST 08 terminal utilizes the 3M External Cable Assembly Module (ECAM) built-in drop entry port system. The ECAM module design allows true plug-and-play capability which may help reduce installation and labor costs because the drop preparation and installation are completed outside of the terminal closure body. Also, the built-in cable entry system allows the technician to add and remove drops from the terminal closures without 3M™ 12 mm External Cable Assembly Module (ECAM) Cable Entry Port disturbing previously installed drops. Factory-Terminated Drop Terminations For factory-terminated drop terminations, the FDST 08 terminal utilizes the 3M™ External Cable Assembly Module (ECAM) FD Factory-Terminated Fiber Drop Cable. The 3M ECAM FD module is a factory-terminated drop cable with SC connectors on one or both ends. It is available with SC/APC or SC/UPC connectors and in lengths ranging from 50 to 2,500 feet (15 to 760 m). The innovative design of the ECAM FD drop cable allows the SC connector to be replaced with a field assembled connector thus allowing the drop cable to be salvaged if the SC connector is damaged. The ECAM FD module is shipped with a pulling sock to protect the drop and to allow the drop to be pulled through trees and conduit. 3 Loopback Qualification Testing Option The 3M™ Fiber Dome Stubbed Terminal FDST 08 can be purchased with a factoryinstalled loopback qualification testing configuration. This configuration allows bidirectional qualification testing from the Fiber Distribution Hub (FDH) to the FDST 08 with only one technician and one test set. The configuration uses the couplings in the interconnection panel of the FDST 08 terminal to loop a single distribution fiber with a connectorized end from the FDH to the FDST 08 terminal to another fiber terminated in the same terminal to conduct the bi-directional testing. The fibers are set up in a loopback configuration in the factory and upon service activation, the 3M™ Fiber Dome Stubbed Terminal FDST 08 loopback testing feature connectorized fiber is moved into service mode by the installer. This feature helps to reduce the overall cost to commission a FTTP network. Features Benefits Re-enterable terminal Allows easy access to clean and repair connectors Replaceable terminal and terminal stub tails Allows the terminal or terminal tail to be re-used if either of these are damaged. Additional protection for the fiber connector Helps reduce the potential for connector contamination Loopback testing Allows for one-person qualification testing from the FDH to the terminal. This feature helps to reduce the costs to ensure that the network is ready for service activation. Field upgradeable Four port and six port versions. Can be upgraded up to eight port with additional or replacement of multifiber factory terminated stubbed cable. Compact and hermetically sealed FDST 08 terminal is designed to be deployed in most outside plant environments: aerial strand, pole pedestal and handhole/vault applications. Designed and tested to Telcorida GR-771 Factory terminated stubbed cable Terminal is available with flat OSP cable with bend insensitive fibers in lengths up to 2500' (760 m). This virtually eliminates the need to splice pigtails or terminated fibers in the field and enhances network reliability/ quality since the construction staff does not have to handle the connector. ECAM built-in cable entry port termination system Allows true plug and play capability without disturbing previously installed cables when adding and removing the 3M™ External Cable Assembly Module (ECAM) FCA Factory-Terminated Fiber Cable Assembly, ECAM FD Drops or field terminated drops. The factory terminated cables/drops help reduce installation and labor costs since cable assemblies are connectorized at the factory. Simple, error-free closure sealing and re-entry system Fixed O-Ring seal reduces the potential for craft error during the terminal sealing process. Innovate latching mechanism provides for simple re-entry into terminal by lifting the dome lid away from the base. Field or factory installed 3M™ PLC Splitters or CWDMs PLC splitters and CWDMs are available that can be factory or field installed. 3M™ Fiber Dome Stubbed Terminal FDST 08 with 3M™ PLC Splitter 3M™ Fiber Dome Stubbed Terminal FDST 08 Simple dome latching system allows for easy initial sealing or re-entry Up to 12 SC/UPC, SC/APC or LC Terminations Up to 8 3M™ External Cable Assembly Module ECAM FD or Field terminated drops or 6 3M™ External Cable Assembly Module ECAM-FCA 4 connector cable may be accommodated Fixed position O-ring reduces the potential for craft error during the closure sealing process Replaceable stub cable allows for reuse of stub cable or terminal in the event of cable or terminal damage Eight 12MM (0.47”) 3M™ External Cable Assembly Module ECAM drop cable ports Factory-terminated flat stub cable in lengths from 10' to 2500' 3M™ Fiber Dome Stubbed Terminal FDST 08 Configuration Guide 1 2 3 4 5 6 7 FDST XXX X XX X XX XXXX X 1 Terminal Size 08 2 2 3 4 5 13.0" x 7.2" x 6.0" (330.0 mm x 182.0 mm x 151.0 mm) Drop Termination Type # of Fibers 1, 4, 6, 8, 12 6 Cable Length - feet (meters) A ECAM, SC/APC 0050 50 feet (15 m) B ECAM, SC/UPC 0080 82 feet (25 m) C ECAM, LC/APC 0100 100 feet (30 m) D ECAM, LC/UPC 0150 150 feet (45 m) E ECAM, ST 0200 200 feet (60 m) F ECAM, FC 0250 250 feet (75 m) N Bare Fiber 0300 300 feet (90 m) # of Drop Ports 0350 350 feet (105 m) 2, 4, 6, 8, 12 0400 400 feet (120 m) Cable & Fiber Type 0450 450 feet (135 m) A Flat - Dielectric, single, 250 µm fiber 0500 500 feet (150 m) B Flat - Dielectric, ribbon, 250 µm fiber 0700 700 feet (210 m) C Flat - Tonable, single, 250 µm fiber 1000 1000 feet (305 m) D Flat - Tonable, ribbon, 250 µm fiber 1500 1500 feet (450 m) E Round - Dielectric, single, outdoor, 250 µm fiber 2000 2000 feet (610 m) F Round - Dielectric, single, riser rated 2500 2500 feet (760 m) G Round - Dielectric, single, plenum rated 7 Special Features N None A Loopback Testing B 1x4 PLC Splitter, SC/APC C 1x8 PLC Splitter, SC/APC 3M™ Fiber Dome Stubbed Terminal FDST 08 Specifications Dimensions: (L x W x H) mm (in) 305 x 184 x 152 (13.0 x 7.25 x 6.0) # of Drop Terminations 4, 6, or 8 Drop Termination Method Factory Terminated Drop - ECAM-FD Drop, ECAM-FCA; Field Terminated Drop Connector Type* SC/APC, SC/UPC, LC Stub Cable Lengths 50' (15 m) to 2500' (760 m) Cable Type Dielectric Flat Cable Tonable Flat Cable Fiber Type Single, bend insensitive fiber Cable & Assembly Specifications Cable Compliance: Telcordia GR-20 Connector Tested to: Telcordia GR-326 Terminal Tested to: Telcordia GR-771 * Available with other types of connetors (LC, ST, FC) Accessories Product Number Product Description 3M ID Minimum Order ECAM-12MM-MF-US 12 mm ECAM Single Cable Entry Port for Miniflex Duct 8 mm 80-6113-3621-7 8 ECAM-12MM-FLAT-US 12 mm ECAM Single Cable Entry Port for 1 or 2 Flat Cables 80-6113-2649-9 8 FDT-08-PED-CH FD 08 Pedestal Mounting Bracket for 10" Channell Pedestal 80-6113-1720-9 2 FDT-08-PED-CI FD 08 Pedestal Mounting Bracket for Charles Industries 8" Pedestal 80-6113-1721-7 2 FDST/FDT-08MAERIAL-SHB Aerial Strand Mount Hanger Bracket for FDST 08 & FDT 08M 80-6113-3206-7 3 FDST/FDT-08-POLE/ PED-HB Pole Mount, Wall Mount, BD4,BD5, Channel MAH100 Pedestal Mount Bracket for FDST 08, FDT 08M & FDT 08S 80-6113-3205-9 3 For configurations and additional ordering information contact 1800.426.8688 or your Authorized Distributor. 3M is a trademark of 3M Company. Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of 12 months from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether indirect, special, incidental or consequential regardless of the legal theory asserted. 3 Communication Markets Division 6801 River Place Blvd. Austin, TX 78726-9000 800/426 8688 Fax 800/626 0329 www.3M.com/Telecom Please recycle. Printed in USA. © 3M 2011. All rights reserved. 80-6113-2818-0