FF-402

page 1 of 3 Ultimate FX Full Facepiece Reusable Respirator FF-400 Series Issue Date 5/1/10 Flexibility in X-treme Conditions. 3M™ Ultimate FX Full Facepiece Reusable Respirator FF-400 is a reusable respirator that offers comfort, durability, and ease of cleaning. Features/Benefits Large Lens Featuring Scotchgard™ Protector • Paint and stain resistant lens causes some liquids to bead up on the surface so they can be wiped off easily • Provides a wide field of view for excellent visibility • Meets all requirements of ANSI Z87.1-2003 for high impact (Z87+) Passive Speaking Diaphragm • Optimally positioned passive speaking diaphragm for clearer and easier communications 3M™ Cool Flow™ Valve • Cool Flow™ valve helps make breathing easier • Helps provide cool, dry comfort Comfort • Silicone faceseal and nose cup enhances comfort and durability • Respirators are available in three sizes (small, medium and large) to comfortably fit many face sizes • Comfort Cradle positions the respirator comfortably on head Easy to Use • Bonded silicone gaskets to eliminate loose gaskets that can be lost The 3M™ Ultimate FX Full Facepiece Reusable Respirator FF-400 with replaceable cartridges/filters • Respirator attachments twist on and off for quick assembly and disassembly Multiple Mode Capacity • Available in two different modes: Negative Pressure Air Purifying and Dual Airline Supplied Air The FF-400 Series respirators can be used in dual airline mode: • Available with both back-mounted and front-mounted breathing tubes • Systems can be used in combination with NIOSH approved 3M™ Filters 2000/2200 Series, 3M™ Cartridges 6000 Series and 3M™ Filter/Cartridges 7000 Series • Cartridge/filter connections provide pressure and powered and supplied air capability in one respirator assembly *Employer must provide a minimum of Grade D breathing air in accordance with OSHA requirements. •C  an be used on both high and low pressure systems* •W  earer can disconnect the airline at the air regulating valve and the system is changed to a filter/cartridge air purifying mode— then back to supplied air system with a simple reconnection of the airline •S  mall diameter breathing tubes are simple to work with and easy to clean and decontaminate WARNING These respirators help reduce exposure to certain airborne contaminants. Misuse may result in sickness or death. Before use, the wearer must read and understand User Instructions provided as a part of product packaging. Time use limitations may apply. For proper use, see supervisor, packaging or call 3M OH&ESD Technical Service at 1-800-243-4630. In Canada, call 1-800-267-4414 or 1-800-265-1840, ext. 6137. 3M™ Ultimate FX Full Facepiece Reusable Respirator FF-400 Series page 2 of 3 3M™ Filters and Accessories 2000 and 2200 Series, 7093, 5N11, 5P71 2071 2076HF P95 Filter P95 Filter with hydrogen fluoride, nuisance level acid gas relief* 2291 P100 Filter 2078 2091/07000 P95 Filter with nuisance level organic vapor and  acid gas relief* 2296 P100 Filter with nuisance level acid gas relief* P100 Filter 2297 P100 Filter with nuisance level organic vapor relief* 2096 2097/07184 P100 Filter with  nuisance level acid  gas relief* 7093 P100 Filter P100 Filter with  nuisance level organic  vapor relief* 7093C/37173 P100 Cartridge/Filter  with hydrogen fluoride,  nuisance level organic vapor and acid gas relief* *Nuisance levels refer to concentrations below the OSHA PEL or other government standard, whichever is lower. 603 Filter Adapter (Use with the 5N11 or 5P71 Filters and  501 Filter Retainer) 5N11 N95 Filter (Use with the  501 Filter Retainer and  6000 Series cartridges) 5P71/07194 501 502 P95 Filter (Use with the  Filter Retainer (Use with Filter Adapter (Use with 2000  501 Filter Retainer and  5N11 and 5P71 Filters and and 2200 Series and 7093 Filters 6000 Series cartridges) 6000 Series cartridges) and 6000 Series cartridges) 3M™ Cartridges 6000 Series Product Number NIOSH Approval* Product Number NIOSH Approval* 6001 Certain organic vapors (a)(b) 60921 P100/Certain organic vapors (a)(b) 6002 60922 6004 Chlorine, hydrogen chloride, and sulfur dioxide  or chlorine dioxide or hydrogen sulfide (a)(b) Certain organic vapors, chlorine, hydrogen chloride,  and sulfur dioxide or hydrogen sulfide or hydrogen fluoride (a)(b) Ammonia and methylamine (a)(b) 60924 P100/Chlorine, hydrogen chloride, and sulfur dioxide or chlorine dioxide or hydrogen sulfide (a)(b) P100/Certain organic vapors, chlorine, hydrogen chloride, and sulfur dioxide or hydrogen sulfide or hydrogen fluoride (a)(b) P100/Ammonia and methylamine (a)(b) 6005 Formaldehyde and certain organic vapors (a)(b) 60925 P100/Formaldehyde and certain organic vapors (a)(b) 6006 Certain organic vapors, chlorine, hydrogen chloride, chlorine dioxide, sulfur dioxide, hydrogen sulfide  ammonia/methylamine, formaldehyde or hydrogen fluoride (a)(b)(c) 60926 6009 Mercury vapor or chlorine gas (a)(b) P100/Certain organic vapors, chlorine, hydrogen chloride, chlorine dioxide, sulfur dioxide, hydrogen sulfide ammonia/methylamine, formaldehyde or hydrogen fluoride (a)(b)(c) P100/Organic vapor/Acid gas (d) P100/Mercury vapor or chlorine gas (a)(b) 6003 60923 60928 60929 * For respiratory protection against the following contaminants up to 10X PEL with half facepiece respirators and full facepiece respirators when qualitatively fit tested, or 50X PEL with full facepiece respirators when quantitatively fit tested. (a) All respirators and respirator/filter assemblies can be used up to the NIOSH approval limits, 10X PEL for half facepiece respirators and full facepiece respirators when qualitatively fit tested, or 50X PEL for full facepiece respirators when quantitatively fit tested or the maximum use concentration allowable in applicable OSHA standards, whichever is lower. (b) For specific usage, limitations and warning information, see respirator and/or filter packaging, or call 3M OH&ESD Technical Service 1-800-243-4630. In Canada call 1-800-267-4414. (c) OSHA regulations require that gas-proof goggles be worn with half facepiece respirators when used against formaldehyde. (d) As recommended by the California Department of Pesticide Regulation No. 01-099 Methyl Bromide Field Fumigation. 3M™ Ultimate FX Full Facepiece Reusable Respirator FF-400 Series page 3 of 3 To complete a 3M™ Dual Airline Respirator System, select a facepiece, an adapter kit and an air supply hose. For example: FF-402 + SA-2000 + W-9435-100 = complete system High Pressure Low Pressure Standard Back-Mounted Adapter Kit. Includes SA-2500 Breathing Tube, GVP-127 Belt and SA-1009 Air Regulator or SA-1029 Connector (low pressure). SA-2000 SA-2000LP Combination Back-Mounted Adapter Kit. Includes 2600 Breathing Tube, GVP-127 Belt and SA-1009 Air Regulator or SA-1029 Connector (low pressure). Cartridges/Filters not included. SA-2100 SA-2100LP Standard Front-Mounted Adapter Kit. Includes SA-1500 Breathing Tube, GVP-127 Belt and SA-1009 Air Regulator or SA-1029 Connector (low pressure). SA-1000 SA-1000LP Combination Front-Mounted Adapter Kit. Includes SA-1600 Breathing Tube, GVP-127 Belt and SA-1009 Air Regulator or SA-1029 Connector (low pressure). Cartridges/Filters not included. SA-1100 SA-1100LP Accessories and Replacement Parts Replacement Parts FF-400 Series Accessories FF-400 Series FF-400-01 Head Harness Buckle FF-400-08 Bayonet Assembly Inhalation Valve FF-400-20 Spectacle Kit FF-400-02 Head Harness Button FF-400-09 Exhalation Valve Cover (Standard) FF-400-15 Lens Cover FF-400-03 Lens Assembly FF-400-10 Exhalation Valve Cover (Solid) FF-400-04 Head Harness FF-400-11 Nose Cup Assembly FF-400-17 Semi-Permanent  Lens Cover FF-400-05 Frame Assembly w/Screw FF-400-13 Speaking Diaphragm Assembly FF-400-06 Comfort Cradle 7582 Inhalation Valve FF-400-07 Exhalation Valve Assembly 7583 3M™ Cool Flow™ Valve Full Facepiece FF-400 Series Facepieces per box Facepieces per case 1 4 FF-401 Small FF-402 Medium FF-403 Large For more information, please contact: 3M Occupational Health and Environmental Safety Division (OH&ESD) In the U.S., contact: 3M™ Quantitative Fit Test Adapter 601 3M™ Fit Test Kits • FT-10 Qualitative Fit Test Apparatus For use with all 3M bayonet attachment facepieces. • FT-20 Qualitative Training and Fit Testing Case (sweet solution) • FT-30 Qualitative Fit Test Apparatus (bitter solution) Occupational Health and Environmental Safety Division 3M Center, Building 235-2E-91 St. Paul, MN 55144-1000 Customer Service 1-800-328-1667 Technical Assistance 1-800-243-4630 Website www.3M.com/OccSafety For other 3M products 1-800-3M HELPS In Canada, contact: 3M Canada Company, OH&ESD P.O. Box 5757 London, Ontario N6A 4T1 Customer Care 1-800-364-3577 Technical Assistance (Canada only) 1-800-267-4414 Website www.3M.ca/safety Technical Assistance In Mexico 01-800-712-0646 5270-2255, 5270-2119 (Mexico City only) Technical Assistance In Brazil 0800-132333