HF539/30

8 TM 3M 7 6 5 4 3 2 1 NOTES MEDIUM FLEX LIFE FLAT CABLE, HF539 1. MATERIAL: A) PRIMARY INSULATION: HALOGEN FREE POLYOLEFIN (PO). B) CONDUCTORS: 28 AWG, 19 X 40 AWG (19 X , 0.079), TINNED STRANDED COPPER. .050" 28 AWG STRANDED, MEDIUM FLEX LIFE, HALOGEN FREE PO 2. REGULATORY INFORMATION: ROHS COMPLIANT. SEE THE REGULATORY INFORMATION APPENDIX (RIA) IN THE "RoHS COMPLIANCE" SECTION OF WWW.3MCONNECTORS.COM FOR COMPLIANCE INFORMATION (RIA E1 & C1 APPLY) DIM. "A" D UL FILE NO: E42769, UL STYLE NO: 21682. DIM. "B" .050 1.27 D 3. MARKINGS: STANDARD: NONE CANADIAN: SEE "PRINTING ILLUSTRATION" VIEW PRIMARY CABLE: BLUE MARK ON EDGES DESIGNATES WIRE NUMBER 1. .002 0.05 4. THE SURFACE DEFINED BY THE "ZIP" PROCESS IS NOT REQUIRED TO BE BLUE. TYP. 5. ENVIRONMENTAL: TEMP RATING: -40 C TO 105 C FLAMABILITY RATING: HORIZONTAL. 0.89 28 AWG 19 x 40 AWG [19X TIN STRANDED COPPER 0.08 PO INSULATION 0.079] C X HF539/XX XX ROLLING FLEX CYCLES PER EIA-364-41 RADIUS 1/2" 3/4" 1 3/4" BLANK = STANDARD C = CANADIAN TABLE 1 DIMENSION CHART B NUMBER OF CONDUCTORS 3M PART NUMBER 6 9 10 14 15 16 20 24 25 26 30 34 36 37 40 50 60 64 HF539/06 HF539/09 HF539/10 HF539/14 HF539/15 HF539/16 HF539/20 HF539/24 HF539/25 HF539/26 HF539/30 HF539/34 HF539/36 HF539/37 HF539/40 HF539/50 HF539/60 HF539/64 DIMENSION 'A' AS NOTED DIMENSION 'B' (SEE NOTE 2) 0.300" 0.450" 0.500" 0.700" 0.750" 0.800" 1.000" 1.200" 1.250" 1.300" 1.500" 1.700" 1.800" 1.850" 2.000" 2.500" 3.000" 3.200" 0.250" 0.400" 0.450" 0.650" 0.700" 0.750" 0.950" 1.150" 1.200" 1.250" 1.450" 1.650" 1.750" 1.800" 1.950" 2.450" 2.950" 3.150" 0.010" 0.010" 0.010" 0.010" 0.010" 0.015" 0.015" 0.015" 0.015" 0.015" 0.020" 0.020" 0.020" 0.020" 0.020" 0.020" 0.020" 0.020" BLANK = STANDARD SF = SPLICE FREE VOLTAGE RATING INSULATION RESISTANCE MINIMUM CYCLES 0.4 MILLION 5 MILLION 10 MILLION NOTE: REPRESENTS MINIMUM ROLLING FLEX CYCLES AT DATE OF PUBLICATION. ADDITIONAL TESTING IS ONGOING. CABLE CONSTRUCTION AND MATERIAL IS SIMILAR TO 3319 SERIES CABLE WHICH IS RATED TO 100 MILLION CYCLES AT 7/8" REDIUS. SEE TS-0732. CONTACT 3M FOR THE MOST UP-TO-DATE INFORMATION. NUMBER OF CONDUCTORS (SEE TABLE 1) 0.007" 0.007" 0.007" 0.007" 0.007" 0.011" 0.011" 0.011" 0.011" 0.011" 0.015" 0.015" 0.015" 0.015" 0.015" 0.015" 0.015" 0.015" 78-5100-2565-9 A Note: Available in standard 100 ft and 300 ft rolls, please specify when ordering. Contact 3M for availability of additional conductor counts and/or custom roll lengths. C B TABLE 2 ELECTRICAL CHARACTERISTICS USA: 300V, CANADA: 150V, EU: 50V PRIMARY CABLE >1 X 1010 /10 FT [3 m] UNBALANCED BALANCED CHARACTERISTIC IMPEDANCE 100 168 CAPACITANCE 15.0 p /ft [49.2 p /m] 8.4 p /ft [27.7 p /m] INDUCTANCE 0.15 H/ft [0.49 H/m] 0.24 H/ft [0.79 H/m] PROPAGATION DELAY 1.51 ns/ft [4.95 ns/m] 1.42 ns/ft [4.66 ns/m] VELOCTY OF PROPAGATION 68% 72% NOTE: UNBALANCED IS MEASURED BETWEEN GROUND-SIGNAL-GROUND CONDUCTORS. BALANCED IS MEASURED WITHIN A PAIR. A DESIGN REFERENCE A NEXT ASSEMBLY DIVISION DO NOT SCALE DRAWING "PRINTING ILLUSTRATION" ELECTRONIC SOLUTIONS DIVISION INTERCONNECT SOLUTIONS http://www.3mconnectors.com AWM 21682 105 C 300V HOR AWM 1A 105 150V FT2 THIRD ANGLE PROJECTION 3M IS A TRADEMARK OF 3M COMPANY. FOR TECHNICAL, SALES OR ORDERING INFORMATION CALL 800-225-5373 INTERPRET PER ASME Y14.5 - 1994 MAX SURFACE ROUGHNESS ALL SURFACES MARKED ONLY 7 6 5 4 3 REV ECO ISSUE DATE AND DESCRIPTION DRFT DATE CASTIGLIONE NOV 05,2012 CHKD DATE C ISD 3M Center St. Paul, TOLERANCES EXCEPT AS NOTED SCALE E U