AMPLA7012Q-1R0MT

Molded Inductor AMPLA7012Q Request Samples 7.0 x 6.6 x 1.0 mm RoHS/RoHS II Compliant MSL Level = 1 Applications Features • • • • • Check Inventory AEC-Q200 Qualified Shielded construction Soft saturation Low DCR per cubic mm Designed for switching frequencies between 100KHz2MHz • • • • • • • Body electronics and comfort system Infotainment and entertainment Electric vehicles Lighting Solar inverters and power Industrial and robotics Medium and high-power switch mode power supplies • Electrical Specifications Part Number* Inductance (uH) Tolerance (%) Irms (A) Isat (A) AMPLA7012Q-R10NT AMPLA7012Q-R15NT AMPLA7012Q-R22NT AMPLA7012Q-R33MT AMPLA7012Q-R47MT AMPLA7012Q-R68MT AMPLA7012Q-1R0MT AMPLA7012Q-1R2MT AMPLA7012Q-1R5MT AMPLA7012Q-2R2MT AMPLA7012Q-3R3MT AMPLA7012Q-4R7MT AMPLA7012Q-6R8MT AMPLA7012Q-100MT AMPLA7012Q-180MT AMPLA7012Q-220MT 0.10 0.15 0.22 0.33 0.47 0.68 1 1.2 1.5 2.2 3.3 4.7 6.8 10 18 22 30 30 30 20 20 20 20 20 20 20 20 20 20 20 20 20 16 14 11 9.5 8.5 7.0 6.0 5.0 4.5 4.0 3.2 2.5 2.1 1.8 1.35 1.2 30 24 19 16 12 9.0 7.0 6.8 6.5 5.0 4.0 3.8 3.0 2.5 2 1.7 DC Resistance (mΩ) Typ Max 3.3 4.0 4.9 5.7 6.5 7.5 9.0 10 13 17 17 19 27 30 31 36 35 40 53 61 90 103 130 150 172 198 280 290 490 540 540 600 Type Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame Lead Frame * Please refer to Part Identification Section Test Conditions: Inductance: 100 KHz, 1 V, 0 Adc Humidity Range: 85 ± 2% RH Temperature Rise Current: Current measured when ΔT of 40°C Saturation Current: Current measured when ΔL of 30% General Specifications Operating Temperature: -55°C to +125°C with (40°C rise) Irms current. Maximum Part Temperature: +125°C Tape and Reel packaging Temperature: –10°C to +40°C AMPLA7012Q series is RoHS/ RoHS II Compliant and Pb free. AEC-Q200 Qualified 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISED: 10-25-23 ABRACON IS ISO9001-2015 CERTIFIED Molded Inductor AMPLA7012Q Request Samples Check Inventory 7.0 x 6.6 x 1.0 mm RoHS/RoHS II Compliant MSL Level = 1 Mechanical Specifications Dimensions: inch/[mm] 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISED: 10-25-23 ABRACON IS ISO9001-2015 CERTIFIED Molded Inductor AMPLA7012Q Request Samples Check Inventory 7.0 x 6.6 x 1.0 mm RoHS/RoHS II Compliant MSL Level = 1 Mechanical Specifications Part Identification AMPLA7012Q – Inductance Code Refer to Electrical Specification table E.g. 1R0 Tolerance M: 20% N: 30% 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com Packaging T: 3,000 pcs/reel REVISED: 10-25-23 ABRACON IS ISO9001-2015 CERTIFIED Molded Inductor AMPLA7012Q Request Samples Check Inventory 7.0 x 6.6 x 1.0 mm RoHS/RoHS II Compliant MSL Level = 1 Reflow Profile 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISED: 10-25-23 ABRACON IS ISO9001-2015 CERTIFIED Molded Inductor AMPLA7012Q Request Samples Check Inventory 7.0 x 6.6 x 1.0 mm RoHS/RoHS II Compliant MSL Level = 1 Packaging T: Tape and Reel (3,000 pcs/reel) Type A B C D 13” x 16 mm 16.4 +2/-0 100 ± 2.0 13.0 +0.5/-0.2 330 B0 A0 K0 P W F T D 7.7 ± 0.1 7.0 ± 0.1 1.5 ± 0.1 12.0 ± 0.1 16.0 ± 0.3 7.5 ± 0.1 0.35 ± 0.05 1.5 ± 0.1 Dimensions: mm ATTENTION: Abracon LLC’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information. 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com REVISED: 10-25-23 ABRACON IS ISO9001-2015 CERTIFIED