ASTMUPLPFL-100.000MHZ-LJ-E-T 数据手册
ASTMUPL
High Performance, Programmable LVPECL SMD MEMS Oscillator
ASTMUPLP
Pb
ESD Sensitive
Moisture Sensitivity Level (MSL) – 1
FEATURES:
RoHS/RoHS II compliant
P
3.2 x 2.5 x 0.75mm;
5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
APPLICATIONS:
• 10GB Ethernet, SONET, SATA, SAS, Fiber Channel, PCI Express
• Storage
• Servers
• Networking
• Telecom
• Instrumentation
• Harsh environment (vibration, shock-prone and humid)
• Industry Standard package sizes: 3.2 x 2.5 x 0.75mm,
5 x 3.2 x 0.75mm, 7.0 x 5.0 x 0.9mm
• Any frequency between 1MHz and 625MHz
• Supply Voltage options: 3.3V, 2.8V, 1.8V, 2.25V~3.63V
• Ultra-low RMS phase jitter: 0.6ps typ.
(@156.25MHz, integration bandwidth: 12kHz to 20MHz)
• Frequency Stability options: ±10ppm, ±20ppm, ±25ppm,
±50ppm over -20 to +70°C and -40 to +85°C
STANDARD SPECIFICATIONS:
Min
Output Frequency Range (F)
Frequency Stability (Fstab)
Aging@25°C
1st year
10 years
Supply Voltage (Vdd)
Unit
625
MHz
See Note 1 for Frequencies not
supported
ppm
Inclusive of initial tolerance at 25°C,
and variations over operating
temperature, rated power supply
voltage and load
+10
+20
+25
+50
+70
+85
+2
+5
2.75
3.63
3.63
2.5
3.3
-
Notes
°C
Option “E”
Input Pull-up Impedance ( Zin)
100
Option “L”
ppm
Option “25”
V
Option “33”
Option “Blank” (default)
30%*Vdd
V
V
250
kΩ
Pin 1, OE logic high or logic low,
ST logic high
MΩ
Pin 1, ST logic low
R
Input High Voltage(VIH)
Input Low Voltage(VIL)
-10
-20
-25
-50
-20
-40
-2
-5
2.25
2.97
2.25
70%*Vdd
Max
N
Operating Temperature Range (Tuse)
1
Typ
D
Parameters
2
Pin 1
Pin 1
6
10
ms
Measured from the time Vdd reaches its
rated minimum value
Resume Time ( Tresume)
6
10
ms
In standby mode. Measured from the
time ST pin crosses 50% threshold
55
%
69
mA
Excluding load termination current,
Vdd=2.5V or 3.3V
35
mA
OE=Low
N
Startup Time (Tstart)
Duty Cycle
Output Type
45
Current Consumption ( Idd )
LV P E C L
61
OE Disable Current (IOD)
Output Disable Leakage Current
( Ileak)
Standby Current (Istd)
1
µA
OE=Low
100
µA
Maximum Output Current ( Idriver)
30
mA
ST =Low, for all Vdd
Maximum average current drawn from
OUT+ or OUT-
Note: 1. Frequencies not supported:
Range 1: From 209.000001MHz to 210.999999MHz
Range 2: From 251.000001MHz to 263.999999MHz
Range 3: From 314.000001MHz to 422.999999MHz
Range 4: From 502.000001MHz to 527.999999MHz
LLC
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
REVISED: 12.14.2018
ISO9001-2015
CERTIFIED
ASTMUPL
High Performance, Programmable LVPECL SMD MEMS Oscillator
ASTMUPLP
Pb
P
3.2 x 2.5 x 0.75mm;
5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
RoHS/RoHS II compliant
(Continued)
Parameters
Min
Typ
Max
Unit
Output High Voltage (VOH)
Vdd – 1.1
Vdd – 0.7
V
Output Low Voltage (VOL)
Output Differential Voltage Swing
( VSwing)
Vdd – 1.9
Vdd – 1.5
V
1.6
2.0
V
300
300
700
500
ps
115
ns
1.2
Rise/Fall Time ( Tr /Tf)
OE Enable/Disable Time (Toe)
1.7
1.2
1.7
0.6
0.85
20%-80%, Freq. = 1MHz~220MHz
20%-80%, Freq. = 220MHz~625MHz
F=212.5MHz, 220MHz. For other
frequencies, Toe=100ns+3*cycles
F=100MHz, 156.25MHz, 212.5MHz,
Vdd=2.5V or 3.3V
D
1.2
Notes
RMS Period Jitter ( Tjitt)
RMS Phase Jitter (random) ( Tphj)
Standard Frequencies
ps
F=266MHz, 312.5MHz, 622.08MHz,
Vdd=2.5V or 3.3V
F=156.25MHz, 312.5MHz, integration
bandwidth=12kHz to 20MHz
ps
N
Standard Frequency (MHz)
74.250000 75.000000 98.304000
133.330000 133.333000 133.333300
155.520000 156.250000 161.132800
166.666660 166.666666 200.000000
25.000000 50.000000 74.175824
125.000000 133.000000 133.300000
148.351648 148.500000 150.000000
166.660000 166.666000 166.666600
100.000000
133.333330
166.000000
212.500000
106.250000
133.333333
166.600000
Absolute Maximum Ratings
R
Attempted operation outside the absolute maximum ratings may cause permanent damage to the part. Actual
performance of the IC is only guaranteed within the operational specifications, not at absolute maximum ratings.
N
Parameters
Storage Te mperature
VDD
Electrostatic Discharge (HBM)
Soldering Temperature
(follow standard Pb free soldering guidelines)
Min.
-65
-0 . 5
Max.
150
4
2000
Unit
°C
V
V
260
°C
Thermal Consideration
Package
7.0 x 5.0mm, 6-pin
5.0 x 3.2mm, 6-pin
3.2 x 2.5mm, 6-pin
ABRACON IS
LLC
θJA, 4 Layer Board
(°C/W)
142
97
109
θJC, Bottom
(°C/W)
27
20
20
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
REVISED: 12.14.2018
ISO9001-2015
CERTIFIED
ASTMUPL
High Performance, Programmable LVPECL SMD MEMS Oscillator
ASTMUPLP
Pb
P
3.2 x 2.5 x 0.75mm;
5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
RoHS/RoHS II compliant
PART IDENTIFICATION:
ASTMUPLP -
Output Frequency
in MHz
e.g. 7.3728,
625.000
MHz-
-
-
Pin 1 Function
E: Output Enable
S: Standby
Operating Temp.
E: -20°C ~ +70°C
L: -40°C ~ +85°C
Freq. Stability
Y: ±10ppm
J: ±20ppm
R: ±25 ppm
C: ±50 ppm
Packaging
Blank: Bulk
T: Tape & Reel
(1kpcs / reel)
T3: Tape & Reel
(3kpcs / reel)
D
Package Size
E: 3.2x2.5mm
FL: 5.0x3.2mm
V: 7.0x5.0mm
-
Supply Voltage
Blank: 2.25V~3.63V
25: 2.5V±10%
33: 3.3V±10%
N
RECOMMENDED TERMINATION DIAGRAM
R
Vdd
3.3V
2.5V
R1
133Ω
250Ω
R2
82Ω
62.5Ω
R3
133Ω
250Ω
R4
82Ω
62.5Ω
TYPICAL PHASE NOISE
312.5MHZ, 3.3V, LVPECL Output
N
100MHZ, 3.3V, LVPECL Output
ATTENTION: Abracon LLC’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability
where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment,
written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information.
ABRACON IS
LLC
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
REVISED: 12.14.2018
ISO9001-2015
CERTIFIED
ASTMUPL
High Performance, Programmable LVPECL SMD MEMS Oscillator
ASTMUPLP
Pb
P
3.2 x 2.5 x 0.75mm;
5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
RoHS/RoHS II compliant
OUTLINE DIMENSION:
3.2 x 2.5mm Package (Option “E”)
D
Recommended Land Pattern
Recommended Land Pattern
N
5.0 x 3.2mm Package (Option “FL”)
7.0 x 5.0mm Package (Option “V”)
N
R
Recommended Land Pattern
Pin
Name
Output Enable
1
OE/ST
2
NC
No Connect
3
4
5
6
GND
Out+
OutVdd
Power
Output
Output
Power
Standby
Dimensions: mm
Functionality
H or Open: specified frequency output
L: output is high impedance. Only output driver is disabled
H or Open: specified frequency output
L: output is low (weak pull down). Device goes to sleep
mode. Supply current reduces to Istd.
Leave it floating or connect to GND for better heat
dissipation
Vdd power supply ground(1)
Oscillator output
Complementary oscillator output
Power supply voltage(1)
Notes: 1. A capacitor value of 0.1µF between Vdd and GND is recommended.
ABRACON IS
ISO9001:2008
CE RTIFIED
LLC
2 Faraday,
Suite# B | Irvine | CA 92618 Revised:
07.22.15
5101 Hidden Creek Ln Spicewood
TX 78669
ABRACON
IS
Phone: 512-371-6159 | Fax: 512-351-8858
Ph.
949.546.8000
|
Fax.
949.546.8001
ISO9001-2015
REVISED: 12.14.2018
LLC
For terms and conditions of sales, please visit:
Visit www.abracon.com for Terms and Conditions
of Sale
CERTIFIED
www.abracon.com
High Performance, Programmable LVPECL SMD MEMS Oscillator
ASTMUPLP
Pb
RoHS/RoHS II compliant
ASTMUPL
P
3.2 x 2.5 x 0.75mm;
5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
N
D
TYPICAL PERFORMANCE DATA
REFLOW PROFILE:
Item
TS MAX to TL (Ramp-up Rate)
Conditions
3°C/second max
Preheat
150°C
Temperature Typical (TS TYP)
175°C
Temperature Maximum (TS MAX)
200°C
Time (tS)
60 – 180 seconds
Ramp-up Rate (TL to TP)
3°C/second max
Time Maintained Above
Temperature (TL)
217°C
Time (tL)
60 – 150 seconds
Peak Temperature (TP)
260°C max
Target Peak Temperature (TP Target)
255°C
Time within 5°C of actual peak (tP)
20 – 40 seconds
Max. Number of Reflow Cycles
3
Ramp-down Rate
6°C/second max
Time 25°C to Peak Temperature (t)
8 minutes max
N
R
Temperature Minimum (TS MIN)
ABRACON IS
ISO9001:2008
CE RTIFIED
LLC
2 Faraday,
Suite# B | Irvine | CA 92618 Revised:
07.22.15
5101 Hidden Creek Ln Spicewood
TX 78669
ABRACON
IS
Phone: 512-371-6159 | Fax: 512-351-8858
Ph.
949.546.8000
|
Fax.
949.546.8001
ISO9001-2015
REVISED: 12.14.2018
LLC
For terms and conditions of sales, please visit:
Visit www.abracon.com for Terms and Conditions
of Sale
CERTIFIED
www.abracon.com
ASTMUPL
High Performance, Programmable LVPECL SMD MEMS Oscillator
ASTMUPLP
Pb
P
3.2 x 2.5 x 0.75mm;
5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
RoHS/RoHS II compliant
TAPE & REEL:
3225
5032
7050
D1 min.
T
0.6
0.6
0.6
T1 max.
0.1
0.1
0.1
1.5
1.5
1.5
Unit: mm
P1
P2
E1
E2 min.
F
P0
1.75±0.1
10.25
5.5±0.05
4.0±0.1
4.0±0.1
2.0±0.05
1.75±0.1
10.25
5.5±0.05
4.0±0.1
8.0±0.1
2.0±0.05
1.75±0.1
14.25
7.5±0.1
4.0±0.1
8.0±0.1
2.0±0.1
T2 max.
1.65
1.65
1.80
W max.
12.3
12.3
16.3
A0
2.8±0.10
3.5±0.10
5.4±0.10
B0
3.5±0.10
5.3±0.10
7.4±0.10
Unit: mm
K0
1.10±0.10
1.10±0.10
1.3±0.10
N
R
N
Device Size
3225
5032
7050
D0
1.5+0.1/0.0
1.5+0.1/0.0
1.5+0.1/0.0
D
Device Size
Tape Size
12mm
16mm
A max.
180
330
180
330
Device Size
3225
5032
7050
B min.
1.5
1.5
1.5
1.5
C
13.0±0.2
13.0±0.2
13.0±0.2
13.0±0.2
“T” (1k/reel)
12mm Tape
7” Reel
12mm Tape
7” Reel
16mm Tape
7” Reel
D min.
20.2
20.2
20.2
20.2
N
60±0.5
100±0.5
60±0.5
100±0.5
Unit: mm
W1
W2 max.
12.4+2.0/-0
18.4
12.4+2.0/-0
18.4
16.4+2.0/-0
22.4
16.4+2.0/-0
22.4
“T3” (3k/reel)
12mm Tape
7” Reel
12mm Tape
13” Reel
16mm Tape
13” Reel
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISO9001:2008
CE RTIFIED
LLC
2 Faraday,
Suite# B | Irvine | CA 92618 Revised:
07.22.15
5101 Hidden Creek Ln Spicewood
TX 78669
ABRACON
IS
Phone: 512-371-6159 | Fax: 512-351-8858
Ph.
949.546.8000
|
Fax.
949.546.8001
ISO9001-2015
REVISED: 12.14.2018
LLC
For terms and conditions of sales, please visit:
Visit www.abracon.com for Terms and Conditions
of Sale
CERTIFIED
www.abracon.com