APT30D120SG

1200V 30A APT30D120B APT30D120S APT30D120BG* APT30D120SG* ® *G Denotes RoHS Compliant, Pb Free Terminal Finish. ULTRAFAST SOFT RECOVERY RECTIFIER DIODE TO PRODUCT APPLICATIONS PRODUCT FEATURES PRODUCT BENEFITS • Anti-Parallel Diode -Switchmode Power Supply -Inverters • Free Wheeling Diode -Motor Controllers -Converters -Inverters • Snubber Diode • Ultrafast Recovery Times • Low Losses • Soft Recovery Characteristics • Low Noise Switching • PFC 7 D3PAK 1 2 • Cooler Operation • Popular TO-247 Package or Surface Mount D3PAK Package • Higher Reliability Systems • Low Forward Voltage • Low Leakage Current -2 4 2 1 2 1 • Increased System Power Density 1 - Cathode 2 - Anode Back of Case - Cathode MAXIMUM RATINGS Symbol VR All Ratings: TC = 25°C unless otherwise specified. Characteristic / Test Conditions APT30D120B(G)_S(G) UNIT 1200 Volts Maximum D.C. Reverse Voltage VRRM Maximum Peak Repetitive Reverse Voltage VRWM Maximum Working Peak Reverse Voltage IF(AV) Maximum Average Forward Current (TC = 128°C, Duty Cycle = 0.5) 30 RMS Forward Current (Square wave, 50% duty) 59 IF(RMS) IFSM TJ,TSTG TL Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) Amps 210 -55 to 175 Operating and StorageTemperature Range °C 300 Lead Temperature for 10 Sec. STATIC ELECTRICAL CHARACTERISTICS Forward Voltage IRM Maximum Reverse Leakage Current CT Junction Capacitance, VR = 200V MIN TYP MAX IF = 30A 2.0 2.5 IF = 60A 2.3 IF = 30A, TJ = 125°C 1.8 250 VR = VR Rated, TJ = 125°C 500 APT Website - http://www.advancedpower.com Downloaded from Elcodis.com electronic components distributor Volts VR = VR Rated 32 UNIT µA pF 4-2005 VF Characteristic / Test Conditions 053-0016 Rev C Symbol APT30D120B(G)_S(G) DYNAMIC CHARACTERISTICS Symbol Characteristic Test Conditions trr Reverse Recovery Time trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM IF = 1A, diF/dt = -100A/µs, VR = 30V, TJ = 25°C Maximum Reverse Recovery Current trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM Reverse Recovery Time Qrr Reverse Recovery Charge VR = 800V, TC = 25°C IF = 30A, diF/dt = -200A/µs Maximum Reverse Recovery Current trr IRRM IF = 30A, diF/dt = -200A/µs VR = 800V, TC = 125°C IF = 30A, diF/dt = -1000A/µs Maximum Reverse Recovery Current VR = 800V, TC = 125°C MIN TYP MAX UNIT - 31 - 370 - 660 - 5 - 500 ns - 3450 nC - 12 - 220 ns - 4650 nC - 37 Amps MIN TYP ns nC - - Amps Amps THERMAL AND MECHANICAL CHARACTERISTICS Symbol Characteristic / Test Conditions MAX RθJC Junction-to-Case Thermal Resistance .61 RθJA Junction-to-Ambient Thermal Resistance 40 WT Torque Package Weight oz 5.9 g 10 lb•in 1.1 N•m APT Reserves the right to change, without notice, the specifications and information contained herein. 0.9 0.50 0.7 0.40 0.20 0.3 0.10 0.1 0 Note: 0.5 PDM Z JC, THERMAL IMPEDANCE (°C/W) θ 0.70 0.30 t2 SINGLE PULSE 0.05 10 Duty Factor D = 1/t2 Peak TJ = PDM x ZθJC + TC 10 10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (seconds) FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION -4 RC MODEL 4-2005 Junction temp (°C) 053-0016 Rev C t1 t -5 Power (watts) 0.0442 °C/W 0.00222 J/°C 0.242 °C/W 0.00586 J/°C 0.324 °C/W 0.0596 J/°C Case temperature (°C) FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL Downloaded from Elcodis.com electronic components distributor °C/W 0.22 Maximum Mounting Torque 0.60 UNIT TYPICAL PERFORMANCE CURVES 100 80 70 TJ = 150°C 50 40 TJ = 125°C 30 20 TJ = -55°C 10 0 TJ = 25°C 0.5 1 1.5 2 2.5 3 3.5 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage Qrr, REVERSE RECOVERY CHARGE (nC) 7000 T = 125°C J V = 800V R 6000 60A 5000 4000 30A 3000 2000 15A 1000 0 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 4. Reverse Recovery Charge vs. Current Rate of Change 15A 200 100 50 T = 125°C J V = 800V R 60A 40 30 20 30A 10 15A 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 5. Reverse Recovery Current vs. Current Rate of Change trr Duty cycle = 0.5 T = 175°C J 60 50 IRRM 0.8 IF(AV) (A) Kf, DYNAMIC PARAMETERS (Normalized to 1000A/µs) 300 0 1.0 trr 0.6 40 30 20 0.4 Qrr 0.2 0.0 30A 400 70 Qrr R 500 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE(A/µs) Figure 3. Reverse Recovery Time vs. Current Rate of Change 1.4 1.2 T = 125°C J V = 800V 60A 0 IRRM, REVERSE RECOVERY CURRENT (A) 0 trr, REVERSE RECOVERY TIME (ns) IF, FORWARD CURRENT (A) 90 60 APT30D120B(G)_S(G) 600 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 6. Dynamic Parameters vs. Junction Temperature 10 0 25 50 75 100 125 150 175 Case Temperature (°C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 200 150 4-2005 100 50 0 1 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage Downloaded from Elcodis.com electronic components distributor 053-0016 Rev C CJ, JUNCTION CAPACITANCE (pF) 250 APT30D120B(G)_S(G) Vr diF /dt Adjust +18V APT10035LLL 0V D.U.T. 30µH trr/Qrr Waveform PEARSON 2878 CURRENT TRANSFORMER Figure 9. Diode Test Circuit 1 IF - Forward Conduction Current 2 diF /dt - Rate of Diode Current Change Through Zero Crossing. 3 IRRM - Maximum Reverse Recovery Current. 4 trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. 5 1 4 Zero 5 0.25 IRRM 3 2 Qrr - Area Under the Curve Defined by IRRM and trr. Figure 10, Diode Reverse Recovery Waveform and Definitions 3 D PAK Package Outline TO-247 Package Outline 15.49 (.610) 16.26 (.640) 6.15 (.242) BSC 5.38 (.212) 6.20 (.244) 4.90 (.193) 5.10 (.201) 1.45 (.057) 1.60 (.063) 20.80 (.819) 21.46 (.845) Cathode 4-2005 053-0016 Rev C e3 100% Sn Cathode (Heat Sink) e1 SAC: Tin, Silver, Copper 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 0.40 (.016) 0.65 (.026) 4.50 (.177) Max. 19.81 (.780) 20.32 (.800) 1.65 (.065) 2.13 (.084) 1.01 (.040) 1.40 (.055) 1.00 (.039) 1.15(.045) 12.40 (.488) 12.70 (.500) 0.020 (.001) 0.250 (.010) 2.70 (.106) 2.90 (.114) 1.15 (.045) 1.45 (.057) 1.20 (.047) 1.90 (.075) 1.40 (.055) 2.10 (.083) 5.45 (.215) BSC (2 Plcs.) Anode 2.21 (.087) 2.59 (.102) 13.30 (.524) 13.60(.535) 18.70 (.736) 19.10 (.752) 3.50 (.138) 3.81 (.150) 0.40 (.016) 0.79 (.031) 15.85 (.624) 16.05(.632) Cathode 10.90 (.430) BSC Dimensions in Millimeters and (Inches) 2.40 (.094) 2.70 (.106) (Base of Lead) Heat Sink (Cathode) and Leads are Plated Anode Cathode Dimensions in Millimeters (Inches) APT’s products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved. Downloaded from Elcodis.com electronic components distributor