108648-HMC586LC4B

HMC586LC4B v03.0514 WIDEBAND VCOS - SMT WIDEBAND MMIC VCO w/ BUFFER AMPLIFIER, 4 - 8 GHz Typical Applications Features Low Noise wideband MMIC VCO is ideal for: Wide Tuning Bandwidth • Industrial/Medical Equipment Pout: +5 dBm • Test & Measurement Equipment Low SSB Phase Noise: -100 dBc/Hz @100 kHz • Military Radar, EW & ECM No External Resonator Needed Single Positive Supply: +5V @ 55 mA RoHS Compliant 4 x 4 mm SMT Package Functional Diagram General Description The HMC586LC4B is a wideband GaAs InGaP Voltage Controlled Oscillator which incorporates the resonator, negative resistance device, and varactor diode. Output power and phase noise performance are excellent over temperature due to the oscillator’s monolithic construction. The Vtune port accepts an analog tuning voltage from 0 to +18V. The HMC586LC4B VCO operates from a single +5V supply, consumes only 55 mA of current, and is housed in a RoHS compliant SMT package. This wideband VCO uniquely combines the attributes of ultra small size, low phase noise, low power consumption, and wide tuning range. Electrical Specifications, TA = +25° C, Vcc = +5V Parameter Min. Frequency Range Power Output Typ. 2 Units GHz 5 dBm SSB Phase Noise @ 100 kHz Offset -100 dBc/Hz SSB Phase Noise @ 10 kHz Offset -75 dBc/Hz Tune Voltage (Vtune) 0 18 V Supply Current (Icc) (Vcc = +5.0V) 40 75 mA 10 µA Tune Port Leakage Current (Vtune = +15V) Output Return Loss 2nd Harmonic 1 Max. 4-8 7 dB -14 dBc Pulling (into a 2.0:1 VSWR) 4 MHz pp Pushing @ Vtune= +5V 40 MHz/V Frequency Drift Rate 0.8 MHz/°C Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC586LC4B v03.0514 WIDEBAND MMIC VCO w/ BUFFER AMPLIFIER, 4 - 8 GHz Frequency vs. Tuning Voltage, Vcc = +5V Frequency vs. Tuning Voltage, T = +25 C 8 7 6 4.75 V 5.0 V 5.25 V 5 4 3 8 7 6 +25 C +85 C -40 C 5 4 3 0 2 4 6 8 10 12 14 16 18 20 0 2 4 TUNING VOLTAGE (VOLTS) Sensitivity vs. Tuning Voltage, Vcc= +5V 10 12 14 16 18 20 16 18 20 10 +25 C +85 C -40 C 500 8 OUTPUT POWER (dBm) SENSITIVITY (MHz/VOLT) 8 Output Power vs. Tuning Voltage, Vcc= +5V 600 400 300 200 100 6 4 2 0 +25 C +85 C -40 C -2 -4 0 0 2 4 6 8 10 12 14 16 18 0 20 TUNING VOLTAGE (VOLTS) 2 4 6 8 10 12 14 TUNING VOLTAGE (VOLTS) SSB Phase Noise vs. Tuning Voltage Typical SSB Phase Noise @ Vtune= +5V 0 0 -15 SSB PHASE NOISE (dBc/Hz) SSB PHASE NOISE (dBc/Hz) 6 TUNING VOLTAGE (VOLTS) WIDEBAND VCOS - SMT 9 OUTPUT FREQUENCY (GHz) OUTPUT FREQUENCY (GHz) 9 10 kHz 100 kHz -30 -45 -60 -75 -90 -105 -120 0 2 4 6 8 10 12 14 TUNING VOLTAGE (VOLTS) 16 18 20 -20 -40 -60 -80 -100 -120 2 10 3 10 4 10 5 10 6 10 OFFSET FREQUENCY (Hz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 2 HMC586LC4B v03.0514 WIDEBAND MMIC VCO w/ BUFFER AMPLIFIER, 4 - 8 GHz WIDEBAND VCOS - SMT Absolute Maximum Ratings Vcc +5.5 Vdc Vtune 0 to +22V Junction Temperature 135 °C Continuous Pdiss (T = 85°C) (derate 12.5 mW/°C above 85°C) 625 mW Thermal Resistance (junction to ground paddle) 80 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER Ni. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish HMC586LC4B Alumina, White Gold over Nickel MSL Rating MSL3 [1] Package Marking [2] H586 XXXX [1] Max peak reflow temperature of 260 °C [2] 4-Digit lot number XXXX 3 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC586LC4B v03.0514 WIDEBAND MMIC VCO w/ BUFFER AMPLIFIER, 4 - 8 GHz Pin Descriptions Function Description 1 - 3, 5 - 11, 13, 17 - 24 N/C No Connection. These pins may be connected to RF/DC ground. Performance will not be affected. 4 Vtune Control Voltage and Modulation Input. Modulation bandwidth dependent on drive source impedance. See “Determining the FM Bandwidth of a Wideband Varactor Tuned VCO” application note. 12 Vcc Supply Voltage Vcc= +5V 14, 16 GND Package bottom has an exposed metal paddle that must also be RF & DC grounded. 15 RFOUT RF output (AC coupled) Interface Schematic Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com WIDEBAND VCOS - SMT Pin Number 4 HMC586LC4B v03.0514 WIDEBAND MMIC VCO w/ BUFFER AMPLIFIER, 4 - 8 GHz WIDEBAND VCOS - SMT Evaluation PCB List of Materials for Evaluation PCB 108648 [1] Item Description J1 PCB Mount SMA RF Connector, Johnson J2 PCB Mount SMA Connector, SRI J3 DC Header C1 1000 pF Capacitor, 0402 Pkg. C2 4.7 µF Capacitor, Tantalum U1 HMC586LC4B VCO PCB [2] 108646 Eval Board [1] Reference this number when ordering complete evaluation PCB The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed ground paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [2] Circuit Board Material: Rogers 4350 5 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC586LC4B v03.0514 WIDEBAND VCOS - SMT WIDEBAND MMIC VCO w/ BUFFER AMPLIFIER, 4 - 8 GHz Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 6