CMOS Low Voltage
2.5 Ω Dual SPDT Switch
ADG736
Data Sheet
FEATURES
FUNCTIONAL BLOCK DIAGRAM
1.8 V to 5.5 V single supply
Automotive temperature range: −40°C to +125°C
2.5 Ω (typical) on resistance
Low on resistance flatness
−3 dB bandwidth > 200 MHz
Rail-to-rail operation
10-lead MSOP package
Fast switching times
tON: 16 ns
tOFF: 8 ns
Typical power consumption ( 200 MHz.
Low Power Dissipation. CMOS construction ensures low
power dissipation.
Fast tON/tOFF.
Break-Before-Make Switching Action.
10-Lead MSOP Package.
Each switch conducts equally well in both directions when on, and
each has an input signal range that extends to the power supplies.
The ADG736 exhibits break-before-make switching action.
The ADG736 is available in a 10-lead MSOP package.
Rev. D
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2003–2012 Analog Devices, Inc. All rights reserved.
ADG736
Data Sheet
TABLE OF CONTENTS
Features .............................................................................................. 1
Pin Configuration and Function Descriptions..............................6
Applications ....................................................................................... 1
Typical Performance Characteristics ..............................................7
Functional Block Diagram .............................................................. 1
Test Circuits........................................................................................9
General Description ......................................................................... 1
Terminology .................................................................................... 10
Product Highlights ........................................................................... 1
Applications Information .............................................................. 11
Revision History ............................................................................... 2
Outline Dimensions ....................................................................... 12
Specifications..................................................................................... 3
Ordering Guide .......................................................................... 12
Absolute Maximum Ratings ............................................................ 5
Automotive Products ................................................................. 12
ESD Caution .................................................................................. 5
REVISION HISTORY
2/12—Rev. C to Rev. D
Added Automotive Information (Throughout) ........................... 1
Updated Outline Dimensions ....................................................... 12
Changes to Ordering Guide .......................................................... 12
12/07—Rev. B to Rev. C
Updated Temperature Range (Throughout) ................................. 1
Changes to Features Section............................................................ 1
Changes to Figure 4 and Figure 5 ................................................... 7
Changes to Ordering Guide .......................................................... 12
1/07—Rev. A to Rev. B
Updated Format .................................................................. Universal
Changes to Leakage Currents ......................................................... 3
Changes to Leakage Currents ......................................................... 4
Changes to Ordering Guide .......................................................... 12
Updated Outline Dimensions ....................................................... 12
11/03—Rev. 0 to Rev. A
Renumbered Figures and TPCs ........................................ Universal
Change to Title .................................................................................. 1
Changes to Applications .................................................................. 1
Changes to Absolute Maximum Ratings ....................................... 4
Changes to Ordering Guide ............................................................ 4
Changes to Test Circuit 3 ................................................................. 7
Changes to Outline Dimensions..................................................... 8
Rev. D | Page 2 of 12
Data Sheet
ADG736
SPECIFICATIONS
VDD = 5 V ± 10%, GND = 0 V. All specifications −40°C to +125°C, unless otherwise noted.
Table 1.
Parameter
ANALOG SWITCH
Analog Signal Range
On Resistance (RON)
25°C
0 V to VDD
2.5
4
On Resistance Match Between Channels (∆RON)
On Resistance Flatness (RFLAT (ON))
LEAKAGE CURRENTS
Source Off Leakage IS (Off )
Channel On Leakage ID, IS (On)
DIGITAL INPUTS
Input High Voltage, VINH
Input Low Voltage, VINL
Input Current, IINL or IINH
DYNAMIC CHARACTERISTICS 1
tON
tOFF
Break-Before-Make Time Delay, tD
B Version
−40°C to
−40°C to
+85°C
+125°C
4.5
7
0.1
Unit
V
Ω typ
0.4
0.4
1.2
1.5
±0.01
1
nA typ
±0.01
5
nA typ
2.4
0.8
2.4
0.8
± 0.1
± 0.1
V min
V max
µA typ
µA max
0.005
12
VS = 0 V to VDD, IDS = −10 mA
VS = 0 V to VDD, IDS = −10 mA
VDD = 5.5 V
VS = 4.5 V/1 V, VD = 1 V/4.5 V;
see Figure 11
VS = VD = 1 V or 4.5 V; see Figure 12
VIN = VINL or VINH
ns typ
RL = 300 Ω, CL = 35 pF
VS = 3 V; see Figure 13
RL = 300 Ω, CL = 35 pF
VS = 3 V; see Figure 13
16
16
8
8
ns max
ns typ
ns max
1
1
ns typ
ns min
RL = 300 Ω, CL = 35 pF
VS1 = VS2 = 3 V; see Figure 14
RL = 50 Ω, CL = 5 pF, f = 10 MHz
RL = 50 Ω, CL = 5 pF, f = 1 MHz;
see Figure 15
RL = 50 Ω, CL = 5 pF, f = 10 MHz
RL = 50 Ω, CL = 5 pF, f = 1 MHz;
see Figure 16
RL = 50 Ω, CL = 5 pF; see Figure 17
5
7
Off Isolation
–62
–82
dB typ
dB typ
Channel-to-Channel Crosstalk
–62
–82
dB typ
dB typ
Bandwidth (–3 dB)
200
MHz typ
CS (Off )
CD, CS (On)
POWER REQUIREMENTS
IDD
9
32
pF typ
pF typ
0.001
µA typ
µA max
1.0
1
VS = 0 V to VDD, IDS = −10 mA;
see Figure 10
Ω max
Ω typ
Ω max
Ω typ
Ω max
0.5
Test Conditions/Comments
1.0
Guaranteed by design; not subject to production test.
Rev. D | Page 3 of 12
VDD = 5.5 V
Digital inputs = 0 V or 5 V
ADG736
Data Sheet
VDD = 3 V ± 10%, GND = 0 V. All specifications −40°C to +125°C, unless otherwise noted.
Table 2.
B Version
Parameter
ANALOG SWITCH
Analog Signal Range
On Resistance (RON)
On Resistance Match Between Channels (∆RON)
25°C
−40°C to
+85°C
5
5.5
−40°C to
+125°C
0 V to VDD
8
12
0.4
2.5
0.4
2.5
0.1
On Resistance Flatness (RFLAT (ON))
Unit
V
Ω typ
Test Conditions/Comments
Ω max
VS = 0 V to VDD, IDS = −10 mA;
see Figure 10
See Figure 10
Ω typ
VS = 0 V to VDD, IDS = −10 mA
Ω max
Ω typ
VS = 0 V to VDD, IDS = −10 mA
LEAKAGE CURRENTS
VDD = 3.3 V
Source Off Leakage IS (Off )
±0.01
1
nA typ
Channel On Leakage ID, IS (On)
±0.01
5
nA typ
VS = 3 V/1 V, VD = 1 V/3 V;
see Figure 11
VS = VD = 1 V or 3 V; see Figure 12
2.4
0.8
V min
V max
µA typ
VIN = VINL or VINH
DIGITAL INPUTS
Input High Voltage, VINH
Input Low Voltage, VINL
Input Current, IINL or IINH
DYNAMIC CHARACTERISTICS 1
tON
2.0
0.4
0.005
±0.1
± 0.1
20
20
10
10
1
1
ns typ
RL = 300 Ω, CL = 35 pF
ns max
VS = 2 V; see Figure 13
ns typ
RL = 300 Ω, CL = 35 pF
ns max
VS = 2 V; see Figure 13
ns typ
RL = 300 Ω, CL = 35 pF
ns min
VS1 = VS2 = 2 V; see Figure 14
−62
dB typ
RL = 50 Ω, CL = 5 pF, f = 10 MHz
−82
dB typ
−62
dB typ
RL = 50 Ω, CL = 5 pF, f = 1 MHz;
see Figure 15
RL = 50 Ω, CL = 5 pF, f = 10 MHz
−82
dB typ
Bandwidth (−3 dB)
200
MHz typ
CS (Off )
CD, CS (On)
POWER REQUIREMENTS
9
32
pF typ
pF typ
tOFF
Break-Before-Make Time Delay, tD
Off Isolation
Channel-to-Channel Crosstalk
IDD
14
µA max
6
7
VDD = 3.3 V
0.001
1.0
1
RL = 50 Ω, CL = 5 pF, f = 1 MHz;
see Figure 16
RL = 50 Ω, CL = 5 pF; see Figure 17
1.0
Guaranteed by design; not subject to production test.
Rev. D | Page 4 of 12
µA typ
µA max
Digital inputs = 0 V or 3 V
Data Sheet
ADG736
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 3.
Parameter
VDD to GND
Analog, Digital Inputs 1
Continuous Current, S or D
Peak Current, S or D
Operating Temperature Range
Automotive
Storage Temperature Range
Junction Temperature
MSOP Package, Power Dissipation
θJA Thermal Impedance
Lead Temperature (Soldering,
10 sec)
IR Reflow (Peak Temperature,