HMC142

HMC141LH5 v00.0705 Typical Applications Features The HMC141LH5 is ideal for: Input IP3: +20 dBm • Telecom Infrastructure LO to RF Isolation: 35 dB • Military Radio, Radar & ECM Hermetic SMT Package, 25 mm2 • Space Systems Screening to MIL-PRF-38535 (Class B or S) Available • Test Instrumentation TE 9 GaAs MMIC SMT DOUBLEBALANCED MIXER, 7 - 14 GHz General Description LE The HMC141LH5 is a miniature passive doublebalanced mixer housed in a hermetic SMT leadless package that can be used as an upconverter or downconverter. The device is a passive diode/balun type mixer with high dynamic range. The mixer can handle larger signal levels than most active mixers due to the high third order intercept of 20 dBm. MMIC implementation provides exceptional balance in the circuit resulting in high LO/RF and LO/IF isolations and unit-to-unit consistency. The HMC141LH5 allows the use of surface mount manufacturing techniques and is suitable for high reliability military, industrial and space applications. B SO MIXERS - DBL-BAL - SMT Functional Diagram O Electrical Specifi cations, TA = +25° C, LO Drive = +15 dBm* Parameter Min. Typ. Frequency Range, RF & LO 7 - 12 Frequency Range, IF DC - 2 Max. Min. Typ. Max. 12 - 14 Units GHz DC - 2 GHz Conversion Loss 10 12 11 13 dB Noise Figure (SSB) 10 12 11 13 dB LO to RF Isolation 28 35 28 35 LO to IF Isolation 26 34 26 31 dB dB IP3 (Input) 20 23 dBm IP2 (Input) 35 40 dBm 1 dB Gain Compression (Input) 15 15 dBm *Unless otherwise noted, all measurements performed as downconverter, IF = 1 GHz 9 - 20 For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC141LH5 v00.0705 GaAs MMIC SMT DOUBLEBALANCED MIXER, 7 - 14 GHz Isolation @ LO = +15 dBm 0 -4 -10 ISOLATION (dB) 0 -8 LO to IF 8 10 12 14 16 6 8 10 12 14 16 FREQUENCY (GHz) LE RF FREQUENCY (GHz) Conversion Gain vs. LO Drive Return Loss @ LO = +15 dBm 0 0 -4 -8 -12 B SO -5 LO = +13 dBm LO = +15 dBm LO = +17 dBm LO = +20 dBm -16 -20 6 8 10 12 14 -10 -15 RF LO -20 -25 16 6 8 RF FREQUENCY (GHz) 12 14 16 FREQUENCY (GHz) Upconverter Performance Conversion Gain @ LO = +15 dBm O IF Bandwidth @ LO = +15 dBm 0 0 CONVERSION GAIN (dB) IF Conversion Gain IF Return Loss -4 10 MIXERS - DBL-BAL - SMT -50 6 RESPONSE (dB) 9 -30 -40 -20 CONVERSION GAIN (dB) -20 LO to RF +25C +85C -40C -16 RF to IF TE -12 RETURN LOSS (dB) CONVERSION GAIN (dB) Conversion Gain vs. Temperature @ LO = +15 dBm -8 -12 -16 -20 -4 -8 -12 -16 -20 0 0.5 1 1.5 2 2.5 3 FREQUENCY (GHz) 6 8 10 12 14 16 RF FREQUENCY (GHz) For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 9 - 21 HMC141LH5 v00.0705 GaAs MMIC SMT DOUBLEBALANCED MIXER, 7 - 14 GHz Input IP3 vs. Temperature @ LO = +15 dBm* 35 30 30 25 25 IP3 (dBm) 35 20 10 +25C +85C -40C 5 0 0 6 8 10 12 14 16 6 8 10 12 14 16 14 16 RF FREQUENCY (GHz) LE RF FREQUENCY (GHz) Input P1dB vs. Temperature @ LO = +15 dBm Input IP2 vs. LO Drive* 25 70 60 20 50 40 30 20 B SO INPUT IP2 (dBm) MIXERS - DBL-BAL - SMT 15 10 LO = +13 dBm LO = +15 dBm LO = +17 dBm LO = +20 dBm 5 20 TE 15 LO = +13 dBm LO = +15 dBm LO = +17 dBm LO = +20 dBm 10 0 6 8 10 12 14 16 P1dB (dBm) 9 IP3 (dBm) Input IP3 vs. LO Drive* 15 10 +25C +85C -40C 5 0 6 8 O MxN Spurious @ IF Port 10 Harmonics of LO nLO 2 12 RF FREQUENCY (GHz) RF FREQUENCY (GHz) nLO Spur @ RF Port mRF 0 1 3 4 LO Freq. (GHz) 1 2 3 4 0 XX -1 6 1 6 0 20 9 30 6 44 40 61 53 40 37 8 46 32 59 2 68 63 55 53 52 79 10 38 25 52 59 3 94 95 87 4 88 100 96 76 90 12 39 32 55 64 99 104 14 43 34 54 N/A 16 39 34 53 N/A RF = 10 GHz @ -10 dBm LO = 8.9 GHz @ 20 dBm All values in dBc relative to the IF power level. Measured as downconverter. LO = +20 dBm All values in dBc below input LO level @ RF port. * Two-tone input power = 0 dBm each tone, 1 MHz spacing. 9 - 22 For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC141LH5 v00.0705 GaAs MMIC SMT DOUBLEBALANCED MIXER, 7 - 14 GHz Absolute Maximum Ratings +27 dBm ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS ±2 mA Channel Temperature 150 °C Continuous Pdiss (T = 85 °C) (derate 9.83 mW/°C above 85 °C) 640 mW Thermal Resistance (RTH) (Channel to package bottom) 101.7 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A 9 O B SO Outline Drawing LE IF DC Current MIXERS - DBL-BAL - SMT +13 dBm LO Drive TE RF / IF Input NOTES: 1. PACKAGE BODY MATERIAL: CERAMIC & KOVAR 2. LEAD AND GROUND PADDLE PLATING: GOLD 40-80 MICROINCHES 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. PAD BURR LENGTH 0.15mm MAX. PAD BURR HEIGHT 0.25mm MAX 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 9 - 23 HMC141LH5 v00.0705 GaAs MMIC SMT DOUBLEBALANCED MIXER, 7 - 14 GHz Pin Descriptions Description Interface Schematic 1, 3, 4, 6, 7 9 - 12 GND These pins and package base must be connected to RF/DC ground. 2 RF This pin is AC coupled and matched to 50 Ohms from 7 - 14 GHz 5 IF This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/ sink more than 2 mA of current or die non-function and possible die failure will result. 8 LO This pin is AC coupled and matched to 50 Ohms from 7 - 14 GHz B SO LE TE Function O MIXERS - DBL-BAL - SMT 9 Pin Number 9 - 24 For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC141LH5 v00.0705 GaAs MMIC SMT DOUBLEBALANCED MIXER, 7 - 14 GHz 9 MIXERS - DBL-BAL - SMT B SO LE TE Evaluation PCB O List of Materials for Evaluation PCB 111552 [1] Item Description J1 - J3 PCB Mount SMA RF Connector, SRI U1 HMC141LH5 PCB [2] 111550 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and package base should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 9 - 25