HMC220MS8ETR

HMC220MS8 / 220MS8E v03.1111 Features The HMC220MS8(E) is ideal for: Wide IF Frequency Range: DC - 4 GHz • VSAT & Mobile SatCom Terminals Excellent LO to RF Isolation: 25 dB • Microwave & Military Radio Low Conversion Loss: 7 dB • Wireless Backhaul Equipment No DC Bias & No External Matching Required • Automotive, DSRC and IVHS Ideal for Upconversion & Downconversion • Military RADAR, EW, and ECM Subsystems MSOP8 SMT Package, 14.8 mm² Functional Diagram General Description B SO LE The HMC220MS8(E) is a wideband double-balanced mixer in an 8 lead plastic surface mount package. This fully integrated MMIC mixer is fabricated in a GaAs MESFET process and requires no DC bias and no external matching components. The HMC220MS8(E) mixer integrates Schottky diode mixing elements and on-chip balun transformers to deliver excellent isolation from LO to RF and from LO to IF. The wide IF bandwidth of DC to 4 GHz enables this mixer to be used in a wide range of general purpose applications including upconverters, downconverters, biphase modulators, demodulators, and phase comparators. The HMC220MS8(E) operates with LO drive levels as low as +7 dBm, and exhibits only 7 dB typical conversion loss. Electrical Specifications, TA = +25° C, As a Function of LO Drive LO = +13 dBm IF = 100 MHz Parameter 0-1 TE Typical Applications O Mixers - Single & Double Balanced - SMT GaAs MMIC SMT Double Balanced Mixer, 5 - 12 GHz Min. Typ. LO = +13 dBm IF = 100 MHz Max. Min. Typ. LO = +10 dBm IF = 100 MHz Max. Min. Typ. Units Max. Frequency Range, RF & LO 5 - 10 10 - 12 5.9 - 10 GHz Frequency Range, IF DC - 4 DC - 4 DC - 3.5 GHz Conversion Loss 7.0 10 8.5 10.5 7.5 10 dB Noise Figure (SSB) 7.0 10 8.5 10.5 7.5 10 dB LO to RF Isolation 17 25 13 18 17 25 LO to IF Isolation 20 28 14 20 20 28 dB dB IP3 (Input) 14 17 16 21 13 16 dBm 1 dB Gain Compression (Input) 4 8 4 8 5 8 dBm Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC220MS8 / 220MS8E v03.1111 GaAs MMIC SMT Double Balanced Mixer, 5 - 12 GHz Conversion Gain vs Temperature @ LO = +10 dBm Isolation @ LO = +10 dBm 0 ISOLATION (dB) -40 C +25 C +85 C -15 -15 -20 -25 -30 -20 -35 5 6 7 8 9 10 11 12 13 5 6 7 8 9 10 11 12 13 11 12 13 11 12 13 FREQUENCY (GHz) Conversion Gain vs. LO Drive LE FREQUENCY (GHz) Return Loss @ LO = +10 dBm 0 0 +5 dBm +7 dBm +9 dBm +10 dBm +13 dBm -10 -15 -20 5 6 7 8 LO RF -5 -5 B SO CONVERSION GAIN (dB) RF/IF LO/IF LO/RF -10 TE -10 9 10 11 12 RETURN LOSS (dB) CONVERSION GAIN (dB) -5 -5 -10 -15 -20 -25 5 13 6 7 IF Bandwidth vs LO Drive Conversion Gain and Return Loss 8 9 10 FREQUENCY (GHz) FREQUENCY (GHz) O P1dB vs. Temperature LO = +10 dBm 16 0 Conversion Gain -5 12 +10 dBm -10 P1dB (dBm) IF CONVERSION GAIN (dB) RETURN LOSS (dB) +13 dBm -15 8 -40 C +25 C +85 C 4 -20 Mixers - Single & Double Balanced - SMT 0 +13 dBm +10 dBm IF Return Loss -25 0 0 1 2 3 4 IF FREQUENCY (GHz) 5 6 5 6 7 8 9 10 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 0-2 HMC220MS8 / 220MS8E v03.1111 GaAs MMIC SMT Double Balanced Mixer, 5 - 12 GHz Input IP3 vs. Temperature @ LO = +10 dBm Input IP3 vs. LO Drive 0-3 30 +7 dBm +10 dBm +13 dBm -40 C +25 C +85 C INPUT IP3 (dBm) 25 20 TE 20 15 15 10 10 5 6 7 8 9 10 11 12 13 5 LO FREQUENCY (GHz) 6 7 8 9 10 11 12 13 11 12 13 LO FREQUENCY (GHz) LE Input IP2 vs. Temperature @ LO = +10 dBm Input IP2 vs. LO Drive 50 50 45 30 20 B SO 40 +7 dBm +10 dBm +13 dBm 10 0 5 6 7 8 9 10 12 13 -40 C +25 C +85 C 40 35 30 25 20 5 6 7 8 9 10 LO FREQUENCY (GHz) O LO FREQUENCY (GHz) 11 INPUT IP2 (dBm) INPUT IP3 (dBm) 25 INPUT IP2 (dBm) Mixers - Single & Double Balanced - SMT 30 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC220MS8 / 220MS8E v03.1111 GaAs MMIC SMT Double Balanced Mixer, 5 - 12 GHz Harmonics of LO nLO nLO Spur at RF Port mRF 0 1 2 3 4 LO Freq. (GHz) 1 2 3 4 0 xx 4 12 17 36 5.5 28 27 34 67 1 12 0 29 40 34 7 29 25 39 61 2 62 58 45 57 62 8.5 26 30 55 60 71 78 73 65 75 10 21 43 59 62 > 85 > 85 > 85 > 85 > 85 11.5 17 51 50 xx 13 13 48 50 xx Absolute Maximum Ratings +13 dBm LO Drive +27 dBm Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS B SO RF / IF Input LO = +10 dBm Values in dBc below input LO level measured at the RF port. LE RF = 7.5 GHz @ -10 dBm LO = 7.6 GHz @ +10 dBm All values in dBc below the IF power level (-1RF + 1LO) TE 3 4 Class 1A O ESD Sensitivity (HBM) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com Mixers - Single & Double Balanced - SMT MxN Spurious Outputs 0-4 HMC220MS8 / 220MS8E v03.1111 v03.1111 GaAs MMIC SMT Double Balanced Mixer, 5 - 12 GHz TE LE NOTES: B SO 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish HMC220MS8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] 100% matte Sn MSL1 [2] O Mixers - Single & Double Balanced - SMT Outline Drawing HMC220MS8E RoHS-compliant Low Stress Injection Molded Plastic MSL Rating Package Marking [3] H220 XXXX H220 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX 0-5 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC220MS8 / 220MS8E v03.1111 v03.1111 GaAs MMIC SMT Double Balanced Mixer, 5 - 12 GHz O List of Materials for Evaluation PCB 101830 [1] Item Description J1 - J3 PCB Mount SMA RF Connector U1 HMC220MS8 / HMC220MS8E Mixer PCB [2] 101828 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com Mixers - Single & Double Balanced - SMT B SO LE TE Evaluation Circuit Board 0-6