HMC221BTR

GaAs, MMIC, SPDT Switch, 10 kHz to 3 GHz HMC221B Data Sheet FEATURES FUNCTIONAL BLOCK DIAGRAM Low insertion loss: 0.4 dB typical Input third-order intercept (IP3): 55 dBm typical Positive control: 0 V/3 V Ultrasmall package: SOT-23 A RFC B 6 5 4 APPLICATIONS 1 RF2 2 GND 3 RF1 14079-001 HMC221B Industrial, scientific and medical (ISM) PCMCIA wireless cards Cellular applications Figure 1. GENERAL DESCRIPTION The HMC221B is a single-pole, double-throw (SPDT) switch specified from 10 kHz to 3 GHz in a 6-lead SOT-23 plastic package. This switch offers a very low insertion loss of less than 0.8 dB up to 3 GHz and is well suited for receiver and filter switching applications that require low insertion loss and a small size. The RF1 and RF2 pins are reflective shorts when in an off state, and the two control voltages (the A and B pins) require a minimal dc bias current. Note that the HMC197B exhibits a similar performance in an alternate pinout. Rev. B Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 ©2015–2016 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com HMC221B* PRODUCT PAGE QUICK LINKS Last Content Update: 02/23/2017 COMPARABLE PARTS DESIGN RESOURCES View a parametric search of comparable parts. • HMC221B Material Declaration • PCN-PDN Information EVALUATION KITS • Quality And Reliability • HMC221B Evaluation Board • Symbols and Footprints DOCUMENTATION DISCUSSIONS Data Sheet View all HMC221B EngineerZone Discussions. • HMC221B: GaAs, MMIC, SPDT Switch, 10 kHz to 3 GHz Data Sheet SAMPLE AND BUY REFERENCE MATERIALS Visit the product page to see pricing options. Quality Documentation TECHNICAL SUPPORT • Semiconductor Qualification Test Report: PHEMT-J (QTR: 2013-00285) Submit a technical question or find your regional support number. DOCUMENT FEEDBACK Submit feedback for this data sheet. This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified. HMC221B Data Sheet TABLE OF CONTENTS Features .............................................................................................. 1 Typical Performance Characteristics ..............................................6 Applications ....................................................................................... 1 Insertion Loss, Return Loss, and Isolation ................................6 General Description ......................................................................... 1 Input Power Compression and Third-Order Intercept ............7 Functional Block Diagram .............................................................. 1 Applications Information .................................................................8 Revision History ............................................................................... 2 Evaluation Printed Circuit Board (PCB)....................................8 Specifications..................................................................................... 3 Typical Application Circuit ..........................................................8 Absolute Maximum Ratings ............................................................ 4 Bill of Materials ..............................................................................8 ESD Caution .................................................................................. 4 Outline Dimensions ..........................................................................9 Pin Configuration and Function Descriptions ............................. 5 Ordering Guide .............................................................................9 Interface Schematics..................................................................... 5 REVISION HISTORY 12/2016—Rev. A to Rev. B Changes to Ordering Guide ............................................................ 9 4/2016—v01.1215 to Rev. A This Hittite Microwave Products data sheet has been reformatted to meet the styles and standards of Analog Devices, Inc. Changed SOT26 to SOT-23.......................................... Throughout Changes to Title, Feature Section, and General Description Section ................................................................................................ 1 Changes to Table 1 ............................................................................ 3 Changes to Table 2 ............................................................................ 4 Added Table 3; Renumbered Sequentially, Interface Schematics Section, and Figure 3 to Figure 6; Renumbered Sequentially .....5 Changes to Table 4.............................................................................5 Added Insertion Loss, Return Loss, and Isolation Section ..........6 Added Input Power Compression and Third-Order Intercept Section and Figure 10 and Figure 12 ..............................................7 Changes to Typical Application Circuit Section and Figure 15 .........8 Updated Outline Dimensions ..........................................................9 Changes to Ordering Guide .............................................................9 Rev. B | Page 2 of 9 Data Sheet HMC221B SPECIFICATIONS TA = 25°C, VCTL = 0 V/3 V to 8 V, 50 Ω system, unless otherwise noted. Table 1. Parameter FREQUENCY BAND INSERTION LOSS Symbol Flatness ISOLATION RETURN LOSS GROUP DELAY1 INPUT LINEARITY 1 dB Power Compression Third-Order Intercept1 SWITCHING CHARACTERISTICS1 Rise and Fall Time On and Off Time CONTROL INPUTS Voltage2 High Low Current High Low 1 2 P1dB IP3 tRISE, tFALL tON, tOFF VCTL VINH VINL ICTL IINH IINH Test Conditions/Comments 10 kHz to 1.0 GHz 1.0 GHz to 2.0 GHz 2.0 GHz to 2.5 GHz 2.5 GHz to 3.0 GHz 20 MHz to 1.0 GHz, maximum to minimum 10 kHz to 1.0 GHz 1.0 GHz to 2.0 GHz 2.0 GHz to 2.5 GHz 2.5 GHz to 3.0 GHz 10 kHz to 1.0 GHz 1.0 GHz to 2.0 GHz 2.0 GHz to 2.5 GHz 2.5 GHz to 3.0 GHz 0.5 GHz to 1.0 GHz, maximum to minimum VCTL = 0 V/5 V 10 kHz to 20 MHz 20 MHz to 250 MHz 250 MHz to 1.0 GHz 1.0 GHz to 3.0 GHz Two-tone input power = 9 dBm/tone, ∆f = 1 MHz 10 kHz to 10 MHz 10 MHz to 20 MHz 20 MHz to 30 MHz 30 MHz to 250 MHz 250 MHz to 1.0 GHz 1.0 GHz to 3.0 GHz Min 0.01 24 24 21 14 25 20 20 11 6 25 23 9 12 15 18 40 38 10% to 90% of RF output 50% VCTL to 10%/90% of RF output A and B pins Typ 0.4 0.45 0.6 0.8 0.3 30 29 25 18 33 30 25 22 30 Guaranteed by design but not production tested. The control input voltage tolerances are ±0.2 V dc. Rev. B | Page 3 of 9 Unit MHz dB dB dB dB dB dB dB dB dB dB dB dB dB ps 81 11 30 29 dBm dBm dBm dBm 26 55 54 dBm dBm dBm dBm dBm dBm 3 10 ns ns 3 VCTL = 0 V/3 V VCTL = 0 V/5 V VCTL = 0 V/8 V VCTL = 0 V/3 V VCTL = 0 V/5 V VCTL = 0 V/8 V Max 3000 0.7 0.8 0.9 1.1 0 8 V V 0.1 1 5 −0.1 −1 −5 µA µA µA µA µA µA HMC221B Data Sheet ABSOLUTE MAXIMUM RATINGS Table 2. Parameter Control Voltage Range (A and B) RF Input Power Level (CW Peak, VCTL = 0 V/5 V) 10 kHz to 10 MHz 10 MHz to 20 MHz 20 MHz to 30 MHz 30 MHz to 250 MHz 250 MHz to 3.0 GHz Hot Switching RF Input Power Level (CW Peak, VCTL = 0 V/5 V) 10 kHz to 250 MHz 250 MHz to 3.0 GHz Continuous Power Dissipation, PDISS (at TCASE = 85°C) Junction to Case Thermal Resistance, QJC Temperature Junction, TJ Storage Reflow1 (MSL1 Rating) HMC221B HMC221BE ESD Sensitivity Human Body Model (HBM) 1 Rating −0.2 V dc to 12 V dc 0.36 W 8 dBm 10 dBm 11 dBm 14 dBm 31 dBm Stresses at or above those listed under Absolute Maximum Ratings may cause permanent damage to the product. This is a stress rating only; functional operation of the product at these or any other conditions above those indicated in the operational section of this specification is not implied. Operation beyond the maximum operating conditions for extended periods may affect product reliability. ESD CAUTION 6 dBm 20 dBm 0.36 W 178°C/W 150°C −65°C to +150°C 235°C 260°C 250 V (Class 1A) See the Ordering Guide for additional information. Rev. B | Page 4 of 9 Data Sheet HMC221B PIN CONFIGURATION AND FUNCTION DESCRIPTIONS HMC221B TOP VIEW (Not to Scale) RF2 1 6 A 5 RFC RF1 3 4 B 14079-002 GND 2 Figure 2. Pin Configuration Table 3. Pin Function Descriptions Pin No. 1 2 3 4 5 6 Mnemonic RF2 GND RF1 B RFC A Description RF2 Port (See Figure 4). This pin is dc-coupled and matched to 50 Ω. A dc blocking capacitor is required. Ground (See Figure 6). This pin must be connected to the RF/dc ground of the printed circuit board (PCB). RF1 Port (See Figure 4). This pin is dc-coupled and matched to 50 Ω. A dc blocking capacitor is required. Control Input A (See Table 4 and Figure 5). RF Common Port (See Figure 3). This pin is dc-coupled and matched to 50 Ω. A dc blocking capacitor is required. Control Input B (See Table 4 and Figure 5). Table 4. Truth Table A (V dc) Low High 1 Control Input Voltage1 B (V dc) High Low RFC to RF1 On Off Signal Path State RFC to RF2 Off On All high or all low for control inputs, A and B, are undefined states. The switch response has a high insertion loss and poor return loss on both RF paths. INTERFACE SCHEMATICS 14079-012 14079-010 RFC A, B Figure 5. A and B Interface Figure 3. RFC Interface RF1, RF2 14079-011 14079-013 GND Figure 6. GND Interface Figure 4. RF1 and RF2 Interface Rev. B | Page 5 of 9 HMC221B Data Sheet TYPICAL PERFORMANCE CHARACTERISTICS INSERTION LOSS, RETURN LOSS, AND ISOLATION 0 0 RFC TO RF1 OFF RFC TO RF2 OFF –10 –1.0 ISOLATION (dB) INSERTION LOSS (dB) –0.5 –1.5 –2.0 –20 –30 –40 –2.5 0 0.5 1.0 1.5 2.0 2.5 3.0 FREQUENCY (GHz) –50 14079-003 –3.0 0 RFC RF1, RF2 –20 –30 –40 –50 1.5 2.0 FREQUENCY (GHz) 2.5 3.0 14079-004 RETURN LOSS (dB) –10 1.0 1.5 2.0 2.5 3.0 Figure 9. Isolation Between RFC and RF1/RF2 Ports vs. Frequency 0 0.5 1.0 FREQUENCY (GHz) Figure 7. Insertion Loss vs. Frequency over Temperature 0 0.5 Figure 8. Return Loss vs. Frequency Rev. B | Page 6 of 9 14079-006 +85°C +25°C –40°C Data Sheet HMC221B 70 30 60 25 50 IP3 (dBm) 35 20 P1dB 15 40 30 10 20 5 10 0 10k 100k 1M 10M 100M 1G 0 10k FREQUENCY (Hz) 100k 1M 10M 100M 14079-015 P0.1dB 14079-014 POWER COMPRESION (dBm) INPUT POWER COMPRESSION AND THIRD-ORDER INTERCEPT 1G FREQUENCY (Hz) Figure 10. Input 1 dB Power Compression (P1dB) and Input 0.1dB Power Compression (P0.1dB) vs. Frequency, VCTL = 0 V/5 V Figure 12. Input Third-Order Intercept (IP3) vs. Frequency, VCTL = 0 V/5 V 35 58 30 54 IP3 (dBm) 25 52 50 48 20 0.1dB AT 900MHz 1dB AT 900MHz 0.1dB AT 1900MHz 1dB AT 1900MHz 46 3 4 5 6 CONTROL INPUT (V) 7 8 44 14079-007 15 900MHz 1900MHz 3 4 5 6 7 CONTROL INPUT (V) Figure 11. Input 1 dB Power Compression (P1dB) and Input 0.1dB Power Compression (P0.1dB) vs. Control Input Voltage Rev. B | Page 7 of 9 Figure 13. Input IP3 vs. Control Input Voltage 8 14079-005 P1dB AND P0.1dB (dBm) 56 HMC221B Data Sheet APPLICATIONS INFORMATION EVALUATION PRINTED CIRCUIT BOARD (PCB) TYPICAL APPLICATION CIRCUIT Generate the circuit board used in this application with proper RF circuit design techniques. Signal lines at the RF port must have 50 Ω impedance and connect the package ground leads and package bottom directly to the ground plane similar to that shown in Figure 14. The evaluation circuit board shown Figure 14 is available from Analog Devices, Inc., upon request. Two cascaded, CMOS inverters, biased with VDD = 5 V, can generate complementary control voltages, VCTL = 0 V/5 V, for the A and B inputs. Therefore, the HMC221B can be controlled from a single CMOS input line (see Figure 15). HMC221B RF2 GND RF1 1 6 2 5 3 4 A 1kΩ RFC B 1kΩ VCTL 74HC04 OR 74HCT04 14079-009 Figure 15. Typical Application Circuit Figure 14. Evaluation PCB BILL OF MATERIALS Table 5. List of Materials for Evaluation PCB EVAL01-HMC221B1 Item J1 to J3 J4 to J6 C1 to C3 R1, R2 U1 PCB 1 Description PCB mount SMA RF connectors DC pins 330 pF capacitors, 0402 package 1 kΩ resistors, 0402 package HMC221BE SPDT switch 600-00382-00-1 evaluation PCB, circuit board material: Rogers 4350 References this number when ordering the evaluation PCB. Rev. B | Page 8 of 9 14079-008 VDD Data Sheet HMC221B OUTLINE DIMENSIONS 3.00 2.90 2.80 1.70 1.60 1.50 6 5 4 1 2 3 3.00 2.80 2.60 PIN 1 INDICATOR 0.95 BSC 1.90 BSC 1.45 MAX 0.95 MIN 0.15 MAX 0.05 MIN 0.50 MAX 0.30 MIN 0.20 MAX 0.08 MIN SEATING PLANE 10° 4° 0° 0.60 BSC 0.55 0.45 0.35 COMPLIANT TO JEDEC STANDARDS MO-178-AB 12-16-2008-A 1.30 1.15 0.90 Figure 16. 6-Lead Small Outline Transistor Package [SOT-23] (RJ-6) Dimensions shown in millimeters ORDERING GUIDE Model1 HMC221BE Temperature −40°C to +85°C MSL Rating2 MSL1 Description 6-Lead Small Outline Transistor Package [SOT-23] Package Option RJ-6 Branding3 HMC221BETR −40°C to +85°C MSL1 6-Lead Small Outline Transistor Package [SOT-23] RJ-6 221BE HMC221B −40°C to +85°C MSL1 6-Lead Small Outline Transistor Package [SOT-23] RJ-6 221B HMC221BTR −40°C to +85°C MSL1 6-Lead Small Outline Transistor Package [SOT-23] RJ-6 221BE XXXX XXXX XXXX 221B XXXX EVAL01-HMC221B Evaluation Board 1 The HMC221BE and the HMC221BETR are RoHS-Compliant Parts, and the HMC221B and the HMC221BTR are non RoHS-Compliant Parts. See the Absolute Maximum Ratings section for additional information. 3 XXXX is the 4-digit lot number. 2 ©2015–2016 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D14079-0-12/16(B) Rev. B | Page 9 of 9