HMC423MS8

HMC423MS8 / 423MS8E v02.0705 Features The HMC423MS8 / HMC423MS8E is ideal for: Integrated LO Amplifier w/ Pdiss 92 89 87 4 >92 >92 >92 1.1 1.2 1.3 Harmonics of LO nLO 1 1 FREQUENCY (GHz) nLO Spur @ RF Port 3 4 LO Freq. (GHz) 1 2 25 27 31 45 70 49 26 0.7 30 57 0.85 34 78 1 73 77 >92 >92 RF = 1.0 GHz @ -10 dBm LO = 0.9 GHz @ 0 dBm All values in dBc relative to the IF. Measured as downconverter. 3 4 15 42 40 16 50 42 38 19 48 52 1.15 40 22 54 58 1.3 42 26 44 59 1.45 39 31 50 60 LO = 0 dBm All values in dBc below input LO level @ RF port. * Two-tone input power = 0 dBm each tone, 1 MHz spacing. 9 - 280 For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC423MS8 / 423MS8E v02.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.6 - 1.3 GHz Absolute Maximum Ratings RF / IF Input (Vdd = +3V) +13 dBm LO Drive (Vdd = +3V) +13 dBm Vdd +7 Vdc IF DC Current ±18 mA Channel Temperature (Tc) 150 °C Continuous Pdiss (T = 85°C) (Derate 4.8 mW/°C above 85 C) 0.32 W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C B SO LE Outline Drawing 9 MIXERS - DBL-BAL - SMT TE ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY O 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC423MS8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC423MS8E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H423 XXXX [2] H423 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 9 - 281 HMC423MS8 / 423MS8E v02.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.6 - 1.3 GHz Pin Description Description 1 LO This pin is AC coupled and matched to 50 Ohm from 0.6 - 1.3 GHz. 2, 3, 6, 7 GND Pins must connect to RF ground. 4 Vdd Power supply for the LO Amplifier. One external RF bypass capacitor (10,000 pF) is required. IF This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/sink more than 18 mA of current or die nonfunction and possible die failure will result. 8 LE 5 Interface Schematic TE Function B SO MIXERS - DBL-BAL - SMT 9 Pin Number RF This pin is DC coupled and matched to 50 Ohm from 0.6 - 1.3 GHz Application Circuit C1 4.7 nH O L1 10,000 pF 9 - 282 For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC423MS8 / 423MS8E v02.0705 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.6 - 1.3 GHz 9 MIXERS - DBL-BAL - SMT B SO LE TE Evaluation PCB O List of Materials for Evaluation PCB 105190 [1] Item Description J1 - J3 PCB Mount SMA Connector, Johnson J4, J5 DC Pin C1 10k pF Chip Capacitor, 0603 Pkg. L1 4.7 nH Inductor, 0805 Pkg. U1 HMC423MS8 / HMC423MS8E Mixer PCB [2] 104964 Evaluation Board, 1.00” x 1.00” [1] Reference this number when ordering complete evaluation PCB The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [2] Circuit Board Material: Rogers 4350 For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 9 - 283