HMC524LC3BTR

HMC524LC3B v03.0514 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT GaAs MMIC I/Q MIXER 22 - 32 GHz Typical Applications Features The HMC524LC3B is ideal for: Wide IF Bandwidth: DC - 4.5 GHz • Point-to-Point Radios Image Rejection: 20 dB • Point-to-Multi-Point Radios & VSAT LO to RF Isolation: 45 dB • Test Equipment & Sensors High Input IP3: +20 dBm • Military End Use 12 Lead 3x3mm SMT Package: 9mm² Functional Diagram General Description The HMC524LC3B is a compact I/Q MMIC mixer which can be used as either an Image Reject Mixer or a Single Sideband Upconverter. The chip utilizes standard Hittite mixer cells and a 90 degree hybrid fabricated in a GaAs MESFET process. A low frequency quadrature hybrid was used to produce a 100 MHz USB IF output. This product is a much smaller alternative to hybrid style Image Reject mixers and single sideband upconverter assemblies. The HMC524LC3B eliminates the need for wirebonding, allowing the use of surface mount techniques. Electrical Specifications, TA = +25 °C, IF= 100 MHz, LO = +17 dBm* Parameter Min. Frequency Range, RF/LO Frequency Range, IF Max. 10 18 1 dB Compression (Input) Units GHz DC - 4.5 Conversion Loss (As IRM) Image Rejection Typ. 22 - 32 GHz 13 dB 20 dB +16 dBm LO to RF Isolation 35 40 dB LO to IF Isolation 20 30 dB +20 dBm IP3 (Input) Amplitude Balance ±0.5 dB Phase Balance ±2.5 Deg * Unless otherwise noted, all measurements performed as downconverter. 1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC524LC3B v03.0514 GaAs MMIC I/Q MIXER 22 - 32 GHz Data Taken As IRM With External IF Hybrid Image Rejection vs. Temperature 0 40 IMAGE REJECTION (dB) CONVERSION GAIN (dB) 35 -5 -10 +25C +85C -40C -15 30 25 20 15 10 +25C +85C -40C 5 0 -20 19 21 23 25 27 29 31 33 21 35 23 Conversion Gain vs. LO Drive 29 31 33 0 -5 RF LO -5 RETURN LOSS (dB) CONVERSION GAIN (dB) 27 Return Loss 0 -10 -15 +13dBm +15dBm +17dBm +19dBm -20 -10 -15 -20 -25 -30 21 23 25 27 29 31 -25 33 21 23 RF FREQUENCY (GHz) 25 27 29 31 33 FREQUENCY (GHz) Input P1dB vs. Temperature Input IP3 vs. LO Drive 24 30 22 25 +25C +85C -40C 20 INPUT IP3 (dBm) INPUT P1dB (dBm) 25 RF FREQUENCY (GHz) RF FREQUENCY (GHz) MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT Conversion Gain vs. Temperature 18 16 14 20 15 10 LO = +13 dBm LO = +15 dBm LO = +17 dBm LO = +19 dBm 5 12 10 0 21 23 25 27 29 RF FREQUENCY (GHz) 31 33 21 23 25 27 29 31 33 RF FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 2 HMC524LC3B v03.0514 GaAs MMIC I/Q MIXER 22 - 32 GHz Data Taken As IRM With External IF Hybrid IF Bandwidth -10 0 LO/IF1 -5 RESPONSE (dB) ISOLATION (dB) -20 -30 -40 -50 LO/RF 21 22 23 24 25 26 27 28 29 30 31 32 -15 RETURN LOSS CONVERSION GAIN -20 -30 0.5 33 1 1.5 Amplitude Balance vs. LO Drive 2.5 3 3.5 4 4.5 Phase Balance vs. LO Drive 20 2 PHASE BALANCE (degrees) 3 AMPLITUDE BALANCE (dB) 2 IF FREQUENCY (GHz) RF FREQUENCY (GHz) LO = +13dBm LO = +15dBm LO = +17dBm LO = +19dBm 1 0 -1 -2 -3 10 0 LO = +13dBm LO = +15dBm LO = +17dBm LO = +19dBm -10 -20 21 23 25 27 29 31 33 21 23 RF FREQUENCY (GHz) 25 27 29 31 33 RF FREQUENCY (GHz) Upconverter Performance Conversion Gain vs. LO Drive Upconverter Performance Sideband Rejection vs. LO Drive 0 SIDEBAND REJECTION (dBc) 0 -5 -10 LO = +13dBm LO = +15dBm LO = +17dBm LO = +19dBm -15 LO = +13dBm LO = +15dBm LO = +17dBm LO = +19dBm -10 -20 -30 -40 -50 -20 21 22 23 24 25 26 27 28 29 RF FREQUENCY (GHz) 3 -10 -25 RF/IF1 -60 CONVERSION GAIN (dB) MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT Isolations 30 31 32 33 21 23 25 27 29 31 33 RF FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC524LC3B v03.0514 GaAs MMIC I/Q MIXER 22 - 32 GHz RF / IF Input +20 dBm LO Drive +27 dBm Channel Temperature 150°C Continuous Pdiss (T=85°C) (derate 9.8 mW/°C above 85°C) 340 mW Thermal Resistance (RTH) (junction to die bottom) 191.5 °C/W Storage Temperature -65 to +150 °C Operating Temperature -55 to +85 °C ESD Sensitivity (HBM) Class 1A MxN Spurious Outputs nLO mRF 0 1 2 3 4 0 xx -13 27 xx xx 1 18 0 35 52 xx 2 76 74 87 74 82 3 xx 83 87 77 87 4 xx xx 82 87 87 RF = 24.5 GHz @ -10 dBm LO = 24.4 GHz @ 17 dBm Data taken without IF hybrid All values in dBc below IF power level ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1.. PACKAGE BODY MATERIAL: ALUMINA 2.. LEAD AND GROUND PADDLE PLATING: 30 - 80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKLE 3.. DIMENSIONS ARE IN INCHES [MILLIMETERS] 4.. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 5.. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM 6.. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT Absolute Maximum Ratings Package Information Part Number Package Body Material Lead Finish HMC524LC3B Alumina, White Gold over Nickel MSL Rating MSL3 [1] Package Marking [2] H524 XXXX [1] Max peak reflow temperature of 260 °C [2] 4-Digit lot number XXXX Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 4 HMC524LC3B v03.0514 GaAs MMIC I/Q MIXER 22 - 32 GHz MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT Pin Descriptions 5 Pin Number Function Description 1, 3, 7, 8, 10, 11, 12 GND The backside of the die must be connected to RF/DC ground. 2 RF This pad is AC coupled and matched to 50 Ohms. 4 IF1 6 IF2 5 N/C No connection required. These pins may be connected to RF/DC ground without affecting performance 9 LO This pad is DC coupled and matched to 50 Ohms. Interface Schematic This pad is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pad must not source/sink more than 3mA of current or die non-function and possible die failure will result. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC524LC3B v03.0514 GaAs MMIC I/Q MIXER 22 - 32 GHz List of Materials for Evaluation PCB 109998 [1] Item Description J1, J2 PCB Mount K RF Connector, SRI J3 - J4 PCB Mount SMA Connector, Johnson U1 HMC524LC3B Mixer PCB [2] 109996 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT Evaluation PCB 6