HMC899
v00.0911
FILTERS - TUNABLE - SMT
3
FILTER - TUNABLE, BAND PASS
19 - 38 GHz
Typical Applications
Features
The HMC899 is ideal for:
Fast Tuning Response
• Test & Measurement Equipment
Excellent Wideband Rejection
• Military RADAR & EW/ECM
Single Chip Replacement
for Mechanically Tuned Designs
• SATCOM & Space
• Industrial & Medical Equipment
Functional Diagram
Small Size: 2.5 x 1.2 x 0.10 mm
General Description
The HMC899 is a MMIC band pass filter which
features a user selectable passband frequency. The
3 dB filter bandwidth is approximately 18%. The
20 dB filter bandwidth is approximately 35%. The
center frequency can be varied between 19 and 38
GHz by applying an analog tune voltage between 0
and 14V. This tunable filter can be used as a much
smaller alternative to physically large switched filter
banks and cavity tuned filters. The HMC899 has
excellent microphonics due to the monolithic design,
and provides a dynamically adjustable solution in
advanced communications applications.
Electrical Specifications, TA = +25 °C
Parameter
Min.
Fcenter Tuning Range
Typ.
19
3 dB Bandwidth
Max.
Units
38
GHz
18
%
0.81 *Fcenter
GHz
High Side Rejection Frequency (Rejection >20 dB)
1.20 *Fcenter
GHz
Low Side Sub-Harmonic Rejection (Rejection >40 dB)
0.54 *Fcenter
GHz
High Side Sub-Harmonic Rejection (Rejection >40 dB)
1.32 *Fcenter
GHz
>50
GHz
Low Side Rejection Frequency (Rejection >20 dB)
Re-entry Frequency (Rejection = 1V)
16
dBm
Frequency Control Voltage (Vfctl)
0
Source/Sink Current (Ifctl)
14
V
±1
mA
Residual Phase Noise [1] (100 kHz Offset)
-157
dBc/Hz
Fcenter Drift Rate
-3.2
MHz/°C
< 100
ns
Tuning Speed, Phase Settling to within 10° [2]
[1] Optimum residual phase noise performance requires the use of a low noise driver circuit.
[2] Tuning speed includes 40 ns tuning voltage ramp from driver.
3-1
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC899
v00.0911
FILTER - TUNABLE, BAND PASS
19 - 38 GHz
Broadband Insertion Loss vs. Vfctl
-5
-20
RETURN LOSS (dB)
INSERTION LOSS (dB)
-10
-30
-40
-50
-60
-70
0V
3V
7V
14V
-80
5
10
15
-10
7V
0V
-15
-20
14V
-25
-30
20
25
30
35
40
45
50
S11
S22
5
10
15
20
25
30
35
FREQUENCY (GHz)
FREQUENCY (GHz)
50
0
0
0V
3V
7V
14V
-4
-5
RETURN LOSS (dB)
-2
INSERTION LOSS (dB)
45
Return Loss vs. Vfctl
Insertion Loss vs. Vfctl
-6
-8
-10
-12
-10
0V
-15
7V
-20
-14
14V
S11
S22
-25
-16
-30
-18
15
20
25
30
35
40
45
15
50
20
25
30
35
40
45
50
FREQUENCY (GHz)
FREQUENCY (GHz)
Insertion Loss vs. Temperature, Vfctl = 7V
Return Loss vs. Temperature, Vfctl = 7V
0
0
-2
+25C
+85C
-55C
-4
-5
RETURN LOSS (dB)
INSERTION LOSS (dB)
40
FILTERS - TUNABLE - SMT
0
0
-90
3
Broadband Return Loss vs. Vfctl
-6
-8
-10
-12
-14
-16
-10
-15
-20
+ 25C
+ 85C
- 55C
-25
-18
-30
-20
20
25
30
35
FREQUENCY (GHz)
40
45
20
25
30
35
40
45
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
3-2
HMC899
v00.0911
FILTER - TUNABLE, BAND PASS
19 - 38 GHz
3
Center Frequency vs. Temperature
Insertion Loss vs. Temperature
CENTER FREQUENCY (GHz)
0
-2
INSERTION LOSS (dB)
40
35
30
25
+25C
+ 85C
- 55C
20
-4
-6
-8
-10
-12
+25C
+ 85C
- 55C
-14
15
-16
0
2
4
6
8
10
12
14
0
2
4
6
22
0
21
-2
RETURN LOSS (dB)
20
19
18
17
+25C
+ 85C
- 55C
15
10
12
14
Maximum Return Loss in a 2 dB
Bandwidth vs Temperature
3 dB Bandwidth vs. Temperature
16
8
Vfctl (Vdc)
Vfctl (Vdc)
BANDWIDTH (%)
FILTERS - TUNABLE - SMT
45
+25C
+ 85C
- 55C
-4
-6
-8
-10
-12
-14
14
0
0
2
4
6
8
10
12
2
4
6
14
8
10
12
14
Vfctl (Vdc)
Vfctl (Vdc)
Low Side Rejection Ratio vs.
Temperature [1]
High Side Rejection Ratio vs.
Temperature [1]
1.25
+25C
+ 85C
- 55C
0.84
F20dB To Fcenter RATIO
F20dB TO Fcenter RATIO
0.85
0.83
0.82
0.81
0.8
+25C
+ 85C
- 55C
1.23
1.21
1.19
1.17
1.15
0
2
4
6
8
Vfctl (Vdc)
10
12
14
0
2
4
6
8
10
12
14
Vfctl (Vdc)
[1] Rejection ratio is defined as the ratio of the frequency at which the relative insertion loss is 20 dB to the insertion loss at ƒcenter.
3-3
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC899
v00.0911
FILTER - TUNABLE, BAND PASS
19 - 38 GHz
3000
0.5
2000
1500
1000
+25C
+ 85C
- 55C
500
1
2
3
4
5
0.3
0.2
0.1
0
6
7
8
9
10
11
12
13
0
14
10
Vfctl (Vdc)
Group Delay vs. Fcenter
30
0.3
25
0.2
+ 25C
+ 85C
- 55C
0.1
15
20
25
30
35
FREQUENCY (GHz)
40
45
50
Input IP3 vs. Temperature
0.4
INPUT IP3 (dBm)
GROUP DELAY (nS)
0V
2V
7V
14V
0.4
GROUP DELAY (ns)
SENSITIVITY (MHz/V)
2500
20
+ 25C
+ 85C
- 55C
15
10
0
0
2
4
6
8
10
12
1
14
2
3
4
5
6
7
9
10
11
12
-110
45
APPROXIMATE Fcenter (GHz)
-130
-140
-150
-160
1e+3
1e+4
14
1e+5
OFFSET FREQUENCY (Hz)
1e+6
1e+7
8
Approximate
Fcenter
40
7
35
6
30
5
25
4
20
3
Delta Phi
15
2
10
1
5
0
2
4
6
8
10
12
DELTA PHI (RAD/V)
+ 1.0V
+ 7.0V
+ 14.0V
-120
13
Phase Sensitivity vs. Vfctl
Residual Phase Noise
-170
1e+2
8
Vfctl (V)
Vfctl (Vdc)
RESIDUAL PHASE NOISE (dBc/Hz)
3
Group Delay vs. Frequency
FILTERS - TUNABLE - SMT
Tuning Sensitivity vs. Vfctl
0
14
Vfctl (Vdc)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
3-4
HMC899
v00.0911
FILTER - TUNABLE, BAND PASS
19 - 38 GHz
3
Frequency Shift vs. Pin
Phase Shift vs. Pin
0
-5
Vfctl = 0.5V
Vfctl = 1V
Vfctl = 7V
Vfctl = 12V
Vfctl = 14V
-10
-15
0
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19
FREQUENCY (MHz)
PHASE (DEGREES)
FILTERS - TUNABLE - SMT
0
-20
-40
Vfctl = 0.5V
Vfctl = 1V
Vfctl = 7V
Vfctl = 12V
Vfctl = 14V
-60
-80
0
1
2
3
4
INPUT POWER (dBm)
Absolute Maximum Ratings
Frequency Control Voltage (Vfctl)
-0.5 to +15V
RF Power Input
27 dBm
Storage Temperature
-65 to +150 °C
ESD Sensitivity (HBM)
Class 1 A
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19
INPUT POWER (dBm)
Reliability Information
Junction Temperature to Maintain
1 Million Hour MTTF
150 °C
Nominal Junction Temperature
(T= 85 °C and Pin = 27 dBm)
103 °C
Operating Temperature
-55 to +85 °C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
3-5
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC899
v00.0911
FILTER - TUNABLE, BAND PASS
19 - 38 GHz
3
FILTERS - TUNABLE - SMT
Outline Drawing
Die Packaging Information [1]
NOTES:
1. ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]
Standard
Alternate
WP-9
[2]
2. DIE THICKNESS IS .004”.
3. TYPICAL BOND PAD IS .004” SQUARE..
5. BOND PAD METALIZATION: GOLD
6. BACKSIDE METALIZATION: GOLD
[1] Refer to “Waffle-Pak & Gel-Pak” section for die packaging dimensions.
[2] For alternate packaging information contact Hittite Microwave Corporation.
7. BACKSIDE METAL IS GROUND
7. CONNECTION NOT REQUIRED FOR UNLABELED PADS.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
3-6
HMC899
v00.0911
FILTER - TUNABLE, BAND PASS
19 - 38 GHz
FILTERS - TUNABLE - SMT
3
Pin Descriptions
Pin Number
Function
Description
Die Bottom
GND
Die bottom must be connected to RF/DC ground.
2
RFIN
This pad is AC coupled and
matched to 50 Ohms.
5
RFOUT
This pad is AC coupled and
matched to 50 Ohms.
7, 8
Vfctl
Center frequency control voltage.
Pads are connected together internally.
Interface Schematic
Assembly Diagram
3-7
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC899
v00.0911
FILTER - TUNABLE, BAND PASS
19 - 38 GHz
3
FILTERS - TUNABLE - SMT
NOTES:
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
3-8
工商网监
湘ICP备2023018690号
