19-5507; Rev 0; 9/10
MAX11835 Evaluation System
Features
The MAX11835 evaluation system (EV system)
demonstrates a complete solution to drive single and
multilayer piezo actuators to create haptic feedback
for products featuring touch interfaces. The MAX11835
efficiently generates any type of user-programmable
waveforms including sine, trapezoidal, square, and
pulse to drive the piezo loads to create custom haptic
sensation. The low-power device directly interfaces
with an application processor/host controller through an
I2C interface and integrates various blocks including a
boost regulator, pattern storage memory, and waveform
generator in one package, thus providing a complete
haptic feedback controller solution.
S Convenient USB Interface
S Touch Panel with Piezo Actuator Mounted for
Haptic Feedback
S Analog Tracking-Mode Capability
S Easy-to-Use WindowsM Graphical User Interface
(GUI) Allows Register Programming for Various
Haptic Waveforms
S All Components Mounted on a Plexiglass Base for
Ease of Handling
S Single-Supply Operation through the USB
S Option for External Power Supply for the Boost
Regulator
The EV system is a multiboard system that includes a
MAXQ2000 USB touch interface board (UTIB) and a
MAX11835 daughter board.
S Separate User’s Guide Available for the Graphical
User Interface
Note: The CD-ROM included with the EV kit contains
a User’s Guide that provides information about the
graphical user interface (GUI).
Ordering Information
PART
Note: The MAX11835
���������������������������������������
is not a touch-screen controller and the touch panel is only provided for haptic
feedback purposes, with the 4-wire flex connector left
unconnected.
MAX11835TEVS+
TYPE
PC
INTERFACE
INTERFACE
TYPE
EV
System
USB
Windows
+Denotes lead(Pb)-free and RoHS compliant.
EV System Contents List
QTY
DESCRIPTION
1
CD-ROM containing a USB driver, quick guide, GUI software for Windows XPM, and PCB schematic and layout files
1
USB touch interface board (MAXQ2000 UTIB board)
1
Haptic actuator controller daughter board (MAX11835) with a connector to plug in to the UTIB board
1
Piezo driver MAX11835 daughter board with a connector to plug in to the UTIB2 board (included with the haptic
versions only)
1
Fujitsu 3.5in touch panel (Fujitsu 817-T010-1401-T670) with piezos mounted under them for haptic feedback
purpose only
2
CUI piezos (Cui Inc. CFT-44TW100-0.6A1-70C) for haptic feedback
1
Mini USB cable
Windows and Windows XP are registered trademarks of
Microsoft Corp.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
Evaluates: MAX11835
General Description
Evaluates: MAX11835
MAX11835 Evaluation System
Figure 1. MAX11835 EV System
Component Lists
MAXQ2000 UTIB Board
DESIGNATION
QTY
DESCRIPTION
DESIGNATION
QTY
DESCRIPTION
C1, C2, C11,
C13
4
1FF -20/+80%, 16V ceramic
capacitors (0603)
Murata GRM188F51C105ZA01D
C28
1
10FF Q20%, 10V ceramic capacitor (0805)
Murata GRM219R61A106KE44D
C3, C6, C12,
C14
4
10FF Q20%, 6.3V ceramic
capacitors (0603)
Murata GRM188R60J106ME47D
EN1B, EN2B,
U2-PIN1,
U2-PIN20
4
2-pin headers, 100 mil
13
0.1FF -20/+80%, 16V ceramic
capacitors (0603)
Murata GRM188F51C104ZA01D
FB1, FB2
2
100FH Q10% ferrite beads
(1206)
TDK FL3215T-101K
J1, J2, J3, J5,
J6, J7, J15, J16,
J17
9
2
22pF Q5%, 50V ceramic
capacitors (0603)
Murata GRM1885C1H220JA01D
2-pin headers, 100 mil
Sullins PBC02SABN
J4, J8, J9, J18,
J19
5
3-pin headers, 100 mil
Sullins PBC03SABN
C20, C21
2
10pF Q5%, 50V ceramic
capacitors (0603)
Murata GRM1885C1H100JA01D
J10
1
21-pin female connector
Hirose DF9-21S-1V(32)
C22
1
33nF Q10%, 16V ceramic capacitor (0603)
Murata GRM188R71C333KA01D
J20
1
5-position USB-mini connector
Hirose UX60-MB-5ST
J21
1
10-pin JTAG header, 100 mil
Sullins PBC05DAAN
LED2, LED3,
LED4
3
RGB SMD LEDs (0805)
Lite-On LTST-C171KYKT
R1–R4
4
4.7kI Q5% resistors (0805)
Vishay CRCW08054K70JNEA
C4, C5, C9,
C10, C15–C19,
C23, C24, C25,
C27
C7, C8
C26
1
4.7FF -20/+80%, 10V ceramic
capacitor (0603)
Murata GRM188F51A475ZE20D
2 _______________________________________________________________________________________
MAX11835 Evaluation System
DESIGNATION
QTY
DESCRIPTION
R5
1
196kI Q5% resistor (0805)
Vishay CRCW0805196KJNEA
R6
1
590kI Q5% resistor (0805)
Vishay CRCW0805590KJNEA
R7
1
61.9kI Q1% resistor (0805)
Vishay CRCW080561K9FKEA
R8, R20, R22,
R37–R40
7
R9, R16, R17
DESIGNATION
QTY
DESCRIPTION
U1, U7
2
Adjustable LDO linear
regulators (5 SC70)
Maxim MAX8512EXK-T
U2
1
Octal-level translator
(20 TSSOP)
Maxim MAX3001EEUP
100kI Q5% resistors (0805)
Vishay CRCW0805100KJNEA
U3
1
Fixed 2.5V LDO linear regulator
(5 SC70)
Maxim MAX8511EXK25-T
3
215I resistors (0805)
Vishay CRCW0805215RJNEA
U4
1
UART, 7mm x 7mm (32 TQFP)
FTDI FT232BL
R10, R19,
R32–R36
0
Not installed, resistors
U5
1
2kB EEPROM (8 SO)
Atmel AT93C46A
R11–R14
4
0I SMD resistors (0805)
R15, R18
2
51kI Q5% resistors (0805)
Vishay CRCW080551KJNEA
U6
1
16-bit microcontroller
(68 QFN-EP*)
Maxim MAXQ2000-RAX
R21
1
169kI Q5% resistor (0805)
Vishay CRCW0805169KJNEA
U8
1
R23, R24
2
27I Q5% resistors (0805)
Vishay CRCW080527R0JNEA
Quad-level translators
(12 TQFN-EP*)
Maxim MAX3395EETC+
R25
1
1.5kI Q5% resistor (0805)
Vishay CRCW08051K50JNEA
U9
1
Li+ linear battery charger
(14 TDFN)
Maxim MAX8856ETD+
R26
1
2.2kI Q5% resistor (0805)
Vishay CRCW08052K20JNEA
Y1
1
16MHz crystal (HCM49)
ECS ECS-160-20-5PDN-TR
R27
1
470I resistor (0805)
Vishay CRCW0805470RJNEA
Y2
1
6MHz crystal (HCM49)
ECS ECS-60-20-5G3XDS-TR
R28
1
10kI Q5% resistor (0805)
Vishay CRCW080510K0JNEA
Y3
0
Not installed, crystal
1
PCB: USB Touch Interface Board
3
3.3kI Q5% resistors (0805)
Panasonic ERA-S27J332V
—
R29, R30, R31
R41
1
23.7kI Q1% resistor (0805)
Vishay CRCW080523K2FKEA
DESIGNATION
QTY
*EP = Exposed pad.
MAX11835 Daughter Board
ADD0, ADD1,
DIS, IRQB,
RESETB, SCL,
SDA, TRIGB
CF1
DESCRIPTION
0
Not installed, test points
1
10FF X54 ceramic capacitor
(0805)
Murata GRM21BF50J106ZE01L
DESIGNATION
QTY
DESCRIPTION
CF2
1
47nF, 200V ceramic capacitor
(0805)
KEMET C0805C473K2RACTU
CF3, CF4
2
1FF, 10V X5R ceramic
capacitors (0402)
KEMET C0402C475MPACTU
_______________________________________________________________________________________ 3
Evaluates: MAX11835
Component Lists (continued)
Evaluates: MAX11835
MAX11835 Evaluation System
Component Lists (continued)
DESIGNATION
QTY
DESCRIPTION
DESIGNATION
QTY
R3, R8, R9, R11,
R20
DESCRIPTION
5
0I SMD resistors (0805)
R4, R6
2
4.7kI SMD resistors (0402)
CL
0
Not installed, SMD ceramic
capacitor (0805)
C1
0
Not installed, capacitor
D1
1
200V diode
R5
1
20I SMD resistor (0603)
J1
1
2-pin headers, 0.1in pitch
R7
1
220I SMD resistor (0402)
1
21-position male connector
Hirose DF9-21P-1V(32)
R10
1
1I SMD resistor (0805)
R12
0
3
3-pin headers, 100 mil
Sullins PBC03SABN
Not installed, SMD resistor
(0402)
R13
1
0I SMD resistor (0402)
J4
0
Not installed, 20-position
connector
R14
1
4.99kI resistor (0603)
R17, R18
2
49.9I SMD resistors (0402)
J6
1
4-pin header, 0.1in pitch
R19
0
Not installed, resistor
LED1
1
Red SMD LED (1.6mm x 0.8mm)
J2
J3, J5, J7
Q1
1
n-channel MOSFET (hex DIP)
PD = 1W, ID = 0.6A,
VDSS = 200V, VGS = Q20V,
VSD = 2V, RDS(ON) = 1I
R1
1
2MI Q1%, 250V resistor (0805)
R2
1
27kI SMD resistor (0402)
T1
1
Boost transformer
T4, TT1, TT5,
VOUT
0
Not installed, test points
U1
0
Not installed, haptic piezo
controller (25 WLP)
Maxim MAX11835EWA+
X1–X4
4
Empty holes
—
1
PCB: MAX11835
Table 1. UTIB Ports
PORT
DESCRIPTION
J10
Daughter card connector for I2C-controlled devices (includes 1.8V/3.3V/3.6V supplies and reset line)
J20
USB port provides power to the EV system and communication to a PC
J21
JTAG port for programming the MAXQ2000
Table 2. UTIB Default Jumper Settings
JUMPER
SHUNT
POSITION
J5
1-2
Short
J6
1-2
Closed
J7
1-2
User’s preference
J8
2-3
Closed
I2C communication
J9
2-3
Closed
I2C communication
STATUS
J18
—
Open
J19
1-2
Closed
DESCRIPTION
If J5 and J6 are open, 3.6V supply to the daughter board
3V supply to the daughter board
If closed,1.8V supply to the daughter board
—
USB power
4 _______________________________________________________________________________________
MAX11835 Evaluation System
JUMPER
SHUNT
POSITION
STATUS
J1
—
Open
J3
2-3
Closed
Pins 2-3: Default to playback from the device memory
Pins 1-2: Analog tracking mode
J5
2-3
Closed
ADD0 slave address pin (pin 1, DVDD; pin 3, GND)
J7
2-3
Closed
ADD1 slave address pin (pin 1, DVDD; pin 3, GND)
J6
BVDD-VDD
Closed
Power supply to BVDD and AVDD; if needed to provide power
from external voltage source, leave the jumper open and apply
voltage to BVDD
DESCRIPTION
Pin 2: AIN to MAX11835
_______________________________________________________________________________________ 5
Evaluates: MAX11835
Table 3. Jumper Settings for the MAX11835 Daughter Board
Evaluates: MAX11835
MAX11835 Evaluation System
Figure 2a. UTIB Schematic—Main (Sheet 1 of 2)
6 _______________________________________________________________________________________
MAX11835 Evaluation System
Evaluates: MAX11835
Figure 2b. UTIB Schematic—Mini USB (Sheet 2 of 2)
_______________________________________________________________________________________ 7
Evaluates: MAX11835
MAX11835 Evaluation System
Figure 3. MAX11835 Daughter Board Schematic
8 _______________________________________________________________________________________
MAX11835 Evaluation System
Evaluates: MAX11835
1.0”
Figure 4. UTIB PCB Layout—Silkscreen
1.0”
Figure 5. UTIB PCB Layout—Top Assembly
_______________________________________________________________________________________ 9
Evaluates: MAX11835
MAX11835 Evaluation System
1.0”
Figure 6. UTIB PCB Layout—Top Layer
1.0”
Figure 7. UTIB PCB Layout—Layer 2
10
�������������������������������������������������������������������������������������
MAX11835 Evaluation System
Evaluates: MAX11835
1.0”
Figure 8. UTIB PCB Layout—Layer 3
1.0”
Figure 9. UTIB PCB Layout—Bottom Layer
______________________________________________________________________________________ 11
Evaluates: MAX11835
MAX11835 Evaluation System
1.0”
Figure 10. UTIB PCB Layout—Bottom Assembly
2000mil
1600mil
1.0”
Figure 11. MAX11835 PCB Layout—Silkscreen
12
�������������������������������������������������������������������������������������
MAX11835 Evaluation System
1600mil
1.0”
Figure 12. MAX11835 PCB Layout—Top Assembly
2000mil
1600mil
1.0”
Figure 13. MAX11835 PCB Layout—Top Layer
______________________________________________________________________________________ 13
Evaluates: MAX11835
2000mil
Evaluates: MAX11835
MAX11835 Evaluation System
2000mil
1600mil
1.0”
Figure 14. MAX11835 PCB Layout—Layer 2
2000mil
1600mil
1.0”
Figure 15. MAX11835 PCB Layout—Layer 3
14
�������������������������������������������������������������������������������������
MAX11835 Evaluation System
1600mil
1.0”
Figure 16. MAX11835 PCB Layout—Bottom Layer
2000mil
1600mil
1.0”
Figure 17. MAX11851 PCB Layout—Bottom Assembly
______________________________________________________________________________________ 15
Evaluates: MAX11835
2000mil
Evaluates: MAX11835
MAX11835 Evaluation System
Revision History
REVISION
NUMBER
REVISION
DATE
0
9/10
DESCRIPTION
Initial release
PAGES
CHANGED
—
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied.
Maxim reserves the right to change the circuitry and specifications without notice at any time.
16
© 2010
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
Maxim Integrated Products
Maxim is a registered trademark of Maxim Integrated Products, Inc.