WISE-4210
Industrial Proprietary LPWAN (SUB-G)
Wireless I/O Module
Features
Proprietary LPWAN with using sub-1GHz wireless frequency
Battery power for 5 years with 3 x 3.6V AA batteries
Up to 5 km communication range in open space
Longer communication range than 2.4GHz
Better penetration through concrete and steel than 2.4GHz
Less interference than 2.4GHz spectrum
Application-ready I/O combination with modularization design
Introduction
MQTT and RESTful API IoT Protocol Support
LPWAN, created for machine-to-machine (M2M) and Internet of things (IoT) networks,
is not a single technology, but a variety of low-power, wide area network technologies.
Compare with traditional mobile network, LPWAN is known as lower cost with higher
power efficiency. WISE-4210 series is the proprietary LPWAN which provides better
connection compare with traditional 2.4G WiFi, WISE-4210 series is helpful of eliminating
network interference.
Azure IoT Hub Support
Additionally, WISE-4210 utilize a LPWAN(low-power, wide-area networks) wireless
interface, which has a kilometer-long communication distance and battery power. The
features of LPWAN make WISE modules ideal solutions for energy and environment
monitoring.
IoT Wireless sensor nodes are designed for not only automation applications but also IoT
applications that may use MQTT or RESTful web API IoT protocols for cloud integrations.
To provide a complete IoT sensing solution, the WISE-4210 series goes beyond being
a wireless communication interface for sensors—it also provides cloud connectivity for
additional user applications. With support for HTTPS and integrated APIs for Azure IoT
Hub, the WISE-4210 series can automatically push data to the cloud without requiring
an IoT gateway.
Reduced Interference and Extended Communication Range
Compared with Wi-Fi, Bluetooth, Zigbee, or other 2.4GHz wireless interfae, a sub-GHz
interface can reduce interference at sites. Moreover, Sub-GHz is a type of LPWAN designed
for long-range communications. Under the same power consumption, sub-GHz offers a
longer communication range with low data rate than other 2.4 GHz. technologies.
Private Server
Powered by a 3.6V AA Lithium Battery
The low power consumption of sub-GHz enables the sensor node to be powered by a
battery. With a 3.6V AA Lithium battery, the sensor node can maintain communication at
a distance of 5 km for up to 5 years, thereby eliminating the need to recharge or change
batteries.
5 years
Modbus MQTT RESTful
LPWAN AP
WISE-4210-AP
5 km
X64
Star Topology
Star topology, also known as star network, is the most common network setup. In star
topology, every node connects to a central network device which means WISE-4210-S200
series nodes acts as clients should be connected with WISE-4210-AP. In this configuration,
user can organize their own network with 64 nodes paired. Data on a star network pass
through WISE-4210-AP before continuing to its destination. WISE-4210-AP with a LAN
cable manages and controls most of all functions of the network.
LPWAN Sensor Node
WISE-4210-S200 Series
Wireless IoT Sensing Devices
All product specifications are subject to change without notice.
Last updated: 19-Aug-2019
WISE-4210
Frequency Band
Antenna Gain
Data Rate
Outdoor Range
Topology
Network Capacity
NA915: 923MHz (920.60~924.60), BW: 400kHz
EU868: 868MHz (865.00~869.00), BW: 400kHz
UN433: 433MHz (433.05~434.55), BW: 300kHz
902~928MHz:1.33 dBi
863~870MHz:2.19 dBi
625bps, 50kbps
625bps: 5 km with line of sight
50kbps: 2 km with line of sight
Star
64 clients
General
Power Input
Battery Life
Configuration Interface
LED Indicator
Mounting
Dimension (W x H x D)
Certification
AP: 10 ~ 50 VDC
Sensor Node: 3 x AA, 3.6V Lithium Battery or 10 ~ 50 VDC
625bps: 5 years with 10 minute update rate @ 25°C
50kbps: 5 years with 1 minute update rate @ 25°C
AP: LAN port
Sensor Node: Micro-B USB
Status, Error, Tx, Rx, Battery/Signal Level
DIN 35 rail, wall, pole and stack
70 x 102 x 38 mm
CE, FCC, IC, NCC, TELEC
Environment
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
-25 ~ 70°C
5 ~ 95% RH
-40 ~ 85°C
0 ~ 95% RH
WISE-4210-AP (Access Point)
Data Rate
625 bps, 2.5k bps, 5k bps, 50k bps,
Ethernet
RJ-45 (for configuration and data query)
RS-485
Data+, Data- (for query node data)
Messaging Protocol
Modbus/TCP, Modbus/RTU, REST, MQTT
Application Protocol
HTTP, HTTPS, SNTP, DHCP
Transport Protocol
TCP, UDP
Supports RESTful Web API in JSON format
Supports Web Server in HTML5
WISE-4210-S231 (Built-in Temperature & Humidity Sensor)
Temperature Sensor
Operating Range
Resolution
Accuracy
-25°C ~ 70°C (-13°F ~ 157.9°F)
0.1 (°C/°F/K)
±1.0°C (±1.8°F) (vertical installation)
Humidity Sensor
Operating Range
Resolution
Accuracy
WISE-S214
10 ~ 90% RH
0.1% RH
±4% RH @ for 0%~50% RH
±6% RH @ 50%~60% RH
±10% RH @ 60%~90% RH
(4AI/4DI)
Analog Input
Channels
Resolution
4
16bits Bipolar
15bits Unipolar
Sampling Rate
1Hz (per Channel) with 50/60Hz Rejection
(Power Saving Mode)
10Hz (Total) with50/60Hz Rejection (Normal Mode)
Accuracy
±0.1% for Voltage Input
±0.2% for Current Input
Input Range
0~150mV, 0~500mV, 0~1V, 0~5V, 0~10V, ±150mV, ±500mV, ±1V, ±5V,
±10V, 0~20mA, ±20mA, 4-20mA
Input Impedance
>1MΩ (Voltage)
Isolated voltage
3kVrms
Support Data Scaling and Averaging
Digital Input
Channels
4 (Dry Contact)
Supports 32-bit counter input function (maximum signal frequency 200Hz)
Supports keep/discard counter value on power-off
Support inverted digital input status
WISE-S250
Supports Pules Output
Max. Load Voltage
2
100 mA
At 0 -> 1: 100 us
At 1 -> 0: 100 us
(for Resistive Load)
5 kHz
30V
Serial Port
Port Number
Type
Data Bits
Stop Bits
Parity
Baud Rate (bps)
Protocol
1
RS-485
7, 8
1, 2
None, Odd, Even
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Modbus/RTU (Total 64 addresses by 30 max. instructions)
WISE-S251 (6DI/1RS-485)
Digital Input
Channels
6 (Dry Contact)
Supports 32-bit counter input function (maximum signal frequency 200Hz)
Supports keep/discard counter value on power-off
Support inverted digital input status
Serial Port
Port Number
Type
Data Bits
Stop Bits
Parity
Baud Rate (bps)
Protocol
1
RS-485
7, 8
1, 2
None, Odd, Even
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Modbus/RTU (Total 32 address by max. 8 instructions)
Ordering Information
WISE-4210 Access Point
WISE-4210-APNA
WISE-4210-APUA
LPWAN Wireless to Ethernet AP – NA915/EU868
LPWAN Wireless to Ethernet AP – UN433
WISE-4210 Node
WISE-4210-NA
WISE-4210-UA
WISE-4210-S231-NA
WISE-4210-S231-UA
Proprietary LPWAN SUB-G Wireless I/O Module – NA915/EU868
Proprietary LPWAN SUB-G Wireless I/O Module – UN433
LPWAN IoT WSN Temp & RH Sensor- NA902/EU868
LPWAN IoT WSN Temp & RH Sensor - UN433
WISE-S200 I/O Module
WISE-S214-A
4AI/4DI
WISE-S250-A
6DI, 2DO & 1RS-485
WISE-S251-A
6DI & 1RS-485
* Power saving is not for downlink mode.
Accessories
1760002647-01
Bat.Cylindrical 3.6V/2500mAh AA Li/SOCl2
1750008836-01*
863-870MHz Dipole Antenna for WISE-4210
1750008837-01*
902-928MHz Dipole Antenna for WISE-4210
* AS923/EU868 version of WISE-4210 needs to order antenna separately
Dimensions
(6DI, 2DO& 1RS-485)
Digital Input
Channels
Supports
Unit: mm
70
38
102
Channels
Output Current
163
WISE-4210
Digital Output (Sink Type)
275
Common Specification
6 (Dry Contact)
3kHz Frequency Input
Front View
Side View
Online Download www.advantech.com/products
工商网监
湘ICP备2023018690号
