AM15CW-2405S-NZ

Series AM15CW-NZ 15 Watt | DC-DC Converter FEATURES: • • • • • • • • • • Wide 4:1 Input Voltage Range High efficiency up to 91% 1500 VDC Isolation Over Current Protection Remote On/Off control Operating Temperature -40ºC to +105ºC Output Over Voltage protection Continuous Short Circuit Protection Input Under Voltage Protection Bare Part Meet CISPR32/EN55032 Class A Models Single output Model Input Voltage (VDC) Output Voltage (VDC) Input Current max Full/No Load (mA) Output Current max (mA) Isolation (VDC) Max Capacitive Load (uF) Efficiency Typ. (%) AM15CW-2403S-NZ 9-36 3.3 640/50 4000 1500 4700 88 AM15CW-2405S-NZ 9-36 5 710/50 3000 1500 4700 90 AM15CW-2412S-NZ 9-36 12 710/15 1250 1500 1000 90 AM15CW-2415S-NZ 9-36 15 703/15 1000 1500 820 91 AM15CW-2424S-NZ 9-36 24 703/20 625 1500 270 91 AM15CW-4803S-NZ 18-75 3.3 320/30 4000 1500 4700 88 AM15CW-4805S-NZ 18-75 5 356/30 3000 1500 4700 90 AM15CW-4812S-NZ 18-75 12 352/11 1250 1500 1000 91 AM15CW-4815S-NZ 18-75 15 352/11 1000 1500 820 91 AM15CW-4824S-NZ 18-75 24 352/11 625 1500 270 91 *Add suffix “-ST” for optional screw terminal bottom plate or “-STD” for optional DIN Rail screw terminal bottom plate. **Add suffix “-K” for optional heatsink, “-K-ST” for optional heatsink and screw terminal bottom plate or “-K-STD” for optional heatsink and DIN Rail screw terminal bottom plate. Models Dual output Model Input Voltage (VDC) Output Voltage (VDC) Input Current max Full/No Load (mA) Output Current max (mA) Isolation (VDC) Max Capacitive Load (uF) Efficiency Typ. (%) AM15CW-2405D-NZ※ 9-36 ±5 710/50 ± 1500 1500 ± 1500 AM15CW-2412D-NZ※ 9-36 ± 12 710/15 ± 625 1500 ± 470 AM15CW-2415D-NZ※ ± 15 ± 500 ± 330 9-36 703/15 1500 AM15CW-2424D-NZ※ 9-36 ± 24 703/20 ± 312 1500 ± 200 AM15CW-4805D-NZ※ 18-75 ±5 356/30 ± 1500 1500 ± 1500 AM15CW-4812D-NZ※ 18-75 ± 12 352/11 ± 625 1500 ± 470 AM15CW-4815D-NZ※ 18-75 ± 15 352/11 ± 500 1500 ± 330 AM15CW-4824D-NZ※ 18-75 ± 24 352/11 ± 312 1500 ± 200 *Add suffix “-ST” for optional screw terminal bottom plate or “-STD” for optional DIN Rail screw terminal bottom plate. 87 90 90 89 86 90 90 90 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity1,000,000 hours (MIL-HDBK -217F, Ground Benign, t=+25 C) oC 1.5mm from case for 10 sec 300 Safety Specifications Parameters Agency approvals www.aimtec.com F 051e R1.A REV: 07/22/A CE EN62368-1; cULus UL62368-1(※ with exception of dual output models) CISPR32 / EN 55032, Class A / Class B with the recommended EMC circuit Information technology Equipment Designed to meet IEC62368-1 Electrostatic Discharge Immunity IEC 61000-4-2, Contact ±6KV, Air ±8KV, Criteria B RF, Electromagnetic Field Immunity IEC 61000-4-3, 10V/m, Criteria A Electrical Fast Transient / Burst Immunity IEC 61000-4-4, ±2KV with the recommended EMC circuit, Criteria A Tel: +1 514 620 2722 2 of 8 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM15CW-NZ 15 Watt | DC-DC Converter Surge Immunity RF, Conducted Disturbance Immunity IEC 61000-4-5, L-L ±2KV with the recommended EMC circuit, Criteria B IEC 61000-4-6, 3 Vrms, Criteria A Dimensions Pin Out Specifications Top View Bottom View 10.16 (0.40) 5 4 6 20.32 (0.80) 25.40 (1.00) Pin 20.32 (0.80) 2.54 (0.10) 25.40 (1.00) 2.54 (0.10) Side View Printed Face Dual +V Input -V Input On/Off Control +V Output Common -V Output 5.08 (0.20) Notes: All dimensions are typical in millimeters (inches). Case Tolerance ±0.25 (±0.01) Pin diameter tolerance ±0.1 (±0.004) Pin height tolerance ±0.5 (±0.02) 11.70 (0.46) 2.54 (0.10) 10.16 (0.40) Single +V Input -V Input On/Off Control +V Output Trim -V Output 3 2 1 1 2 3 4 5 6 1.00 (0.04) Heatsink Option: AM15CW-NZ-K Top View 25.40 (1.00) Bottom View 2.54 (0.10) Pin 1 20.32 (0.80) 20.32 (0.80) 25.40 (1.00) 11.70 (0.46) Side View 2.54 (0.10) www.aimtec.com REV: 07/22/A 1.00 (0.39) 2.54 (0.10) 1 F 051e R1.A 6 5 4 10.16 (0.40) 2 3 5.08 (0.20) Notes: All dimensions are typical in millimeters (inches). Case Tolerance ±0.25 (±0.01) Pin diameter tolerance ±0.1 (±0.004) Pin height tolerance ±0.5 (±0.02) Tel: +1 514 620 2722 3 of 8 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM15CW-NZ 15 Watt | DC-DC Converter Screw Terminal Option: AM15CW-NZ-ST Pin Out Specifications 76.00 (2.99) 23.00 (0.91) Ø3.30 31.50 (1.24) Pin 61.60 (2.43) 1 2 LED lamp 4 Top View 3 5 1 2 3 4 5 6 Single On/off Ctrl -V Input +V Input -V Output Trim +V Output Dual On/off Ctrl -V Input +V Input -V Output Common +V Output 6 Ø3.30 8.80 (0.35) 21.20 (0.84) Front View Note: Unit: mm (inch) Wire range: 24-12 AWG Tightening torque: Max 0.4 N*m General tolerances: ±0.50 (±0.02) Screw Terminal with heatsink Option: AM15CW-NZ-K-ST 76.00 (2.99) 61.60 (2.43) 23.00 (0.91) 31.50 (1.24) Ø3.30 LED lamp Top View 1 4 2 5 3 6 25.20 (0.99) Ø3.30 8.80 (0.35) Front View Note: Unit: mm (inch) Wire range: 24-12 AWG Tightening torque: Max 0.4 N*m General tolerances: ±0.50 (±0.02) www.aimtec.com F 051e R1.A REV: 07/22/A Tel: +1 514 620 2722 4 of 8 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM15CW-NZ 15 Watt | DC-DC Converter DIN-RAIL Option: AM15CW-NZ-STD Pin Out Specifications Pin 76.00 (2.99) 1 4 2 3 LED lamp Single On/off Ctrl -V Input +V Input -V Output Trim +V Output Dual On/off Ctrl -V Input +V Input -V Output Common +V Output 5 Top View 6 Note: Unit: mm (inch) Mounting rail: TS35 Wire range: 24-12 AWG Tightening torque: Max 0.4 N*m General tolerances: ±0.50 (±0.02) 9.80 (0.39) 22.20 (0.87) Front View 25.80 (1.02) 23.00 (0.91) 31.50 (1.24) 61.60 (2.43) 1 2 3 4 5 6 DIN-RAIL with heatsink Option: AM15CW-NZ-K-STD 76.00 (2.99) 61.60 (2.43) LED lamp 1 4 2 5 3 6 Note: Unit: mm (inch) Mounting rail: TS35 Wire range: 24-12 AWG Tightening torque: Max 0.4 N*m General tolerances: ±0.50 (±0.02) 9.80 (0.39) 22.20 (0.87) Front View 29.80 (1.17) 23.00 (0.91) 31.50 (1.24) Top View www.aimtec.com F 051e R1.A REV: 07/22/A Tel: +1 514 620 2722 5 of 8 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM15CW-NZ 15 Watt | DC-DC Converter Derating Single output 3.3V/5V Output Models 12V/15V/24 Output Models Free Air Convection Free Air Convection Without Heatsink Without Heatsink With Heatsink 100 100 Output Power (%) Output Power (%) With Heatsink 80 60 Safe Operating Area 40 20 80 60 Safe Operating Area 40 20 0 - 40 - 20 0 20 40 71 75 80 60 0 105 100 - 40 85 - 20 0 20 40 60 80 105 100 Ambient Temperature º C Ambient Temperature º C Dual output Free Air Convection Output Power (%) 100 80 60 Safe Operating Area 40 20 0 - 40 - 20 0 20 40 60 71 80 105 100 Ambient Temperature º C Typical Application Circuits Single output + Vin + Vin C1 100uF DC Model C2 www.aimtec.com F 051e R1.A REV: 07/22/A +Vout DC C2 - Vin - Vin + Vout 3.3V/5V/12V/15V Vout 100µF - Vout - Vout 24V Vout 47µF Tel: +1 514 620 2722 6 of 8 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM15CW-NZ 15 Watt | DC-DC Converter Dual output + Vin + Vout + Vin +Vout C2 10uF C1 DC DC - Vin - Vin Model C1 C3 10uF - Vout - Vout 12V/24V Vin 100µF Common 48V Vin 10µF - 47µF Recommended EMC Circuits CY1 1nF/2KV LDM FUSE + Vin + Vout + Vin + +Vout + C2 C1 C3 C4 DC DC - Vin - Vin C5 - Vout - Vout CY2 1nF/2KV Single output Model FUSE C1, C4 C2, C3 LDM C5 Dual output 12V/24V Vin 48V Vin Choose based on actual input current 330µF/50V 330µF/100V 4.7µF/50V 4.7µF/100V 2.2µH/4A 2.2µH/2A Refer to the C2 in typical application circuit Model FUSE C1, C4 C2, C3 LDM C5 12V/24V Vin 48V Vin Choose based on actual input current 330µF/50V 330µF/100V 4.7µF/50V 4.7µF/100V 4.7µH Refer to the C2/C3 in typical application circuit Trimming (Single output) Output voltage can be externally trimmed by utilizing the methods as shown below Fixed Resistor Variable Potentiometer Leave open if not used. www.aimtec.com F 051e R1.A REV: 07/22/A Tel: +1 514 620 2722 7 of 8 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM15CW-NZ 15 Watt | DC-DC Converter 3.3V output models Trim down % 1 2 3 4 5 6 7 8 9 10 Vout (VDC) 3.267 3.234 3.201 3.168 3.135 3.102 3.069 3.036 3.003 2.97 Rt down (KΩ) 190.744 104.218 68.096 48.270 35.741 27.108 20.797 15.983 12.190 9.124 Trim up % 1 2 3 4 5 6 7 8 9 10 Vout (VDC) 3.333 3.366 3.399 3.432 3.465 3.498 3.531 3.564 3.597 3.63 Rt up (KΩ) 303.349 100.149 55.286 35.580 24.504 17.407 12.472 8.842 6.058 3.857 5V output models Trim down % 1 2 3 4 5 6 7 8 9 10 Vout (VDC) 4.95 4.9 4.85 4.8 4.75 4.7 4.65 4.6 4.55 4.5 Rt down (KΩ) 89.996 47.446 29.793 20.131 14.036 9.840 6.775 4.439 2.598 1.111 Trim up % 1 2 3 4 5 6 7 8 9 10 Vout (VDC) 5.05 5.1 5.15 5.2 5.25 5.3 5.35 5.4 5.45 5.5 Rt up (KΩ) 238.676 81.473 46.044 30.398 21.581 15.923 11.985 9.085 6.861 5.101 12V output models Trim down % 1 2 3 4 5 6 7 8 9 10 Vout (VDC) 11.88 11.76 11.64 11.52 11.4 11.28 11.16 11.04 10.92 10.8 Rt down (KΩ) 493.692 299.052 210.127 159.185 126.173 103.042 85.932 72.764 62.316 53.823 Trim up % 1 2 3 4 5 6 7 8 9 10 Vout (VDC) 12.12 12.24 12.36 12.48 12.6 12.72 12.84 12.96 13.08 13.2 Rt up (KΩ) 704.035 156.520 81.479 51.675 35.677 25.695 18.874 13.917 10.152 7.195 15V output models Trim down % 1 2 3 4 5 6 7 8 9 10 Vout (VDC) 14.85 14.7 14.55 14.4 14.25 14.1 13.95 13.8 13.65 13.5 Rt down (KΩ) 632.483 398.237 286.114 220.359 177.137 146.560 123.787 106.169 92.132 80.687 Trim up % 1 2 3 4 5 6 7 8 9 10 Vout (VDC) 15.15 15.3 15.45 15.6 15.75 15.9 16.05 16.2 16.35 16.5 Rt up (KΩ) 1457.699 190.174 94.242 58.954 40.616 29.381 21.791 16.321 12.190 8.961 24V output models Trim down % 1 2 3 4 5 6 7 8 9 10 Vout (VDC) 23.76 23.52 23.28 23.04 22.8 22.56 22.32 22.08 21.84 21.6 Rt down (KΩ) 1284.000 789.923 563.667 433.904 349.754 290.763 247.115 213.514 186.847 165.170 Trim up % 1 2 3 4 5 6 7 8 9 10 Vout (VDC) 24.24 24.48 24.72 24.96 25.2 25.44 25.68 25.92 26.16 26.4 Rt up (KΩ) 814.689 177.714 92.138 58.264 40.107 28.788 21.057 15.440 11.176 7.827 NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity