PI5A392AQE

A product Line of Diodes Incorporated PI5A392A Precision Wide Bandwidth Quad Analog Switches Features Description ÎÎSingle-Supply Operation (+2V to +6V) The 392A is a monolithic analog switches designed for low-voltage, single-supply operation. This high-precision device is ideal for low-distortion audio, video, signal switching and routing applications. ÎÎRail-to-Rail Analog Signal Range ÎÎLow On-Resistance (6-ohm typ @ 5V) Minimizes Distortion and Error Voltages The PI5A392A has four normally open (NO) switches. Each switch conducts current equally well in either direction when on. When off they block voltages up to the power-supply rails. ÎÎRON Matching Between Channels, 0.4-ohm typ ÎÎOn-Resistance Flatness, 2-ohm typ ÎÎLow Charge Injection. Q=4pC typ. Reduces Step errors, The 392A is fully specified with +5V, and +3.3V supplies. With +5V, they guarantee 200 MHz This product is available in the 16-pin QSOP package for operation over the industrial (-40oC to +85 oC) temperature range. ÎÎHigh-Current Channel Capability: >100mA ÎÎTTL/CMOS Logic Compatible ÎÎLow Power Consumption (0.5μW typ) Applications ÎÎPin-compatible with DG3XX, DG4XX, MAX39X ÎÎAudio, Video Switching and Routing ÎÎPackaging (Pb-free & Green): ÎÎBattery-Powered Communication Systems àà 16-pin QSOP (Q) ÎÎComputer Peripherals ÎÎTelecommunications ÎÎPortable Instrumentation ÎÎMechanical Relay Replacement Functional Diagram, Pin Configuration and Truth Tables IN1 1 16 IN1 COM1 2 15 COM2 14 NO2 NO1 3 NC 4 GND 5 NO4 6 COM4 7 IN4 8 PI5A392A Document Number DS41009 Rev 1-2 PI5A392A Logic Switch 0 OFF 1 ON Switch IS shown with logic "0" input. 13 VCC 12 NC 11 NO3 10 COM3 9 IN3 1 www.diodes.com May 2018 Diodes Incorporated A product Line of Diodes Incorporated PI5A392A Absolute Maximum Ratings Parameter Min. Max. Units Storage Temperature -65 150 o C Ambient Temperature with Power Applied -40 85 o C Supply Voltage to Ground Potential -0.5 7.0 V DC Input Voltage -0.5 0.5 V DC Output Current 120 mA Power Dissipation 0.5 W Stress beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. DC Characteristics (Over the Operating Range, TA = –40°C to +85°C, VCC = 5V ±10%, GND = 0V) Parameters Description Test Conditions(1) Min. Typ. VANALOG Analog Signal Range RON ON-Resistance ΔRON Match Between Channels R FLAT(ON) RON Flatness ION = 1 mA, VNO, VNC = 0V TO 5V INO(OFF) INO(ON) On/Off Leakage Current VNO, VNC = 4.5V ICC Quiescent Supply Current VCC = 5.5V, VIN = 0V OR VCC IO Output Current VNO, VNC or VCOM = 0V to 5V 100 VIH Input High Voltage Guaranteed Logic HIGH Level 2.0 VIL Input Low Voltage Guaranteed Logic LOW Level -0.5 IIH Input High Current VCC = Max., VIN = VCC ±1 IIL Input Low Current VCC = Max., VIN = GND ±1 0 INC or NO = 10 mA to 30 mA -30 Max. Units VCC V 6 18 0.4 2 1 2 30 ohm nA 100 mA 0.8 V μA Notes: 1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for applicable device type. PI5A392A Document Number DS41009 Rev 1-2 2 www.diodes.com May 2018 Diodes Incorporated A product Line of Diodes Incorporated PI5A392A Dynamic Electrical Characteristics (Over the Operating Range, TA = –40°C to +85°C, VCC = 5V ±10%, GND = 0V) Parameters Description Test Conditions(1) tON Turn-on Time tOFF Min. Typ. Max. Units VCOM = 3.0V, see Figure 1 10 20 NS Turn-off Time VCOM = 3.0V, see Figure 1 5 10 NS XTALK Crosstalk R L = 100 ohm, f = 30 MHz, see Figure 4 -72 dB C(OFF) NC or NO Capacitance f = 1 kHz 13 pF OIRR Off Isolation R L = 100 ohm, f = 30 MHz, see Figure 5 -55 dB BW Bandwidth –3 dB R L = 100 ohm, see Figure 3 200 MHz D Distortion ΔRON/RL(2) R L = 100 ohm 2 % Q Charge Injection CL = 1 nF, VGen = 0V 3 5 pC DC Characteristics (Over the Operating Range, TA = –40°C to +85°C, VCC = 3.3V ±10%, GND = 0V) Parameters Description VANALOG Analog Signal Range RON ON-Resistance ΔRON Match Between Channels R FLAT(ON) RON Flatness ION = 1 mA, VNO, VNC = 0V TO 5V INO(OFF) INO(ON) On/Off Leakage Current VNO, VNC = 4.5V ICC Quiescent Supply Current VCC = 5.5V, VIN = 0V OR VCC IO Output Current VNO, VNC or VCOM = 0V to 5V 80 VIH Input High Voltage Guaranteed Logic HIGH Level 2.0 VIL Input Low Voltage Guaranteed Logic LOW Level -0.5 IIH Input High Current VCC = Max., VIN = VCC ±1 IIL Input Low Current VCC = Max., VIN = GND ±1 PI5A392A Document Number DS41009 Rev 1-2 Test Conditions(1) Min. Typ. 0 INC or NO = 10 mA to 30 mA -30 3 Max. Units VCC V 15 28 0.4 2 1 2 30 ohm nA 100 mA 0.8 www.diodes.com V μA May 2018 Diodes Incorporated A product Line of Diodes Incorporated PI5A392A Dynamic Electrical Characteristics (Over the Operating Range, TA = –40°C to +85°C, VCC = 5V ±10%, GND = 0V) Parameters Description Test Conditions(1) tON Turn-on Time tOFF Min. Typ. Max. Units VCOM = 3.0V, see Figure 1 20 40 NS Turn-off Time VCOM = 3.0V, see Figure 1 10 20 NS XTALK Crosstalk R L = 100 ohm, f = 30 MHz, see Figure 4 -72 dB C(OFF) NC or NO Capacitance f = 1 kHz 15 pF OIRR Off Isolation R L = 100 ohm, f = 30 MHz, see Figure 5 -55 dB BW Bandwidth –3 dB R L = 100 ohm, see Figure 3 190 MHz D Distortion ΔRON/RL(2) R L = 100 ohm 2 % Q Charge Injection CL = 1 nF, VGen = 0V 3 10 pC Notes: 1. For conditions shown as Max or Min, use appropriate value specified under Electrical Characteristics for applicable device type. 2. ΔRON = ΔRON max – RON min. 3. Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the specified analog signal range. Applications R2 R1 C2 VIN C1 RIN PS391 – Integrate Reset/ Hold C2 C1 + VOUT Figure 1. Programmable Integrator and Sample/Hold The 5A39X can be used to insert various capacitors (C1, C2) and set proper RC times for integration. Resistors R1 and R 2 set initial gain. The R IN resistor X C1 or C2 sets the RC time. The reset switch discharges the hold capacitor through R IN. PI5A392A Document Number DS41009 Rev 1-2 4 www.diodes.com May 2018 Diodes Incorporated A product Line of Diodes Incorporated PI5A392A Test Circuits Vcc Vcc 3V NC, NO COM DUT IN 100 ohm 50% Digital Input VOUT 15pF Analog Output tON 50% 90% 90% tOFF PI5A39X GND Figure 2. Switching Time Active Probe HP4195A Network Analyser COM NO,NC 100 ohm 50ohm 100 ohm DUT VOUT IN PI5A39X S EN VCC Figure 3. Bandwidth PI5A392A Document Number DS41009 Rev 1-2 5 www.diodes.com May 2018 Diodes Incorporated A product Line of Diodes Incorporated PI5A392A Typical Operating Characteristics Active Probe HP4195A Network Analyser COM NO,NC 100 οηµ 100 οηµ COM 50οηµ VOUT RL=100οηµ PI5A39X S EN VCC Figure 4. Crosstalk Active Probe HP4195A Network Analyser NO,NC COM 50 οηµ VOUT 100 οηµ 50οηµ PI5A39X S EN VCC Figure 5. Off Isolation RH = +100W TA = 25°C 20 15 On-Resistance (W) Vcc = +5V 3.3V TA = 25°C CL = 1nF Charge Injection (pC) 20 15 5V 10 5 3.3V 0 0 1 2 3 4 5 5V 0 0 1 2 3 Input Voltage (V) 4 5 Figure 7. On-Resistance vs Input Voltage Figure 6. Charge Injection vs Voltage In Document Number DS41009 Rev 1-2 10 5 Voltage In (Volts) PI5A392A 3.3V 6 www.diodes.com May 2018 Diodes Incorporated A product Line of Diodes Incorporated PI5A392A PIN = 1dBm TA = 25°C RL = 100W 0 RIN = 1dBm RL = 100W TA = 25°C 0 -10 5V Off Isolation OIRR (dB) Insertion Loss BW (dB) -1 3.3V -2 -3 -4 1K -20 -30 -40 -50 -70 -80 -90 1M 10M 100M Frequency (Hz) 1G 3.3V 5V -60 1M 10M 100M 1G Frequency (Hz) Figure 8. Insertion Loss vs Frequency Figure 9. Off Isolation vs Frequency PIN = 1dBm TA = 25°C RL = 100W 0 Off Isolation OIRR (dB) -10 -20 -30 -40 -50 3.3V 5V -60 -70 -80 -90 1M 10M 100M 1G Frequency (Hz) Figure 10. Crosstalk vs Frequency Part Marking Q Package PI5A 392AQE BZYWXX B: Fab 2 Port Code Z: Die Rev Code Y: Year W: Workweek 1st X: Assembly Code 2nd X: Fab Code PI5A392A Document Number DS41009 Rev 1-2 7 www.diodes.com May 2018 Diodes Incorporated A product Line of Diodes Incorporated PI5A392A Packaging Mechanical: 16-QSOP (Q) 16-0056 For latest package info. please check: http://www.diodes.com/design/support/packaging/pericom-packaging/packaging-mechanicals-and-thermal-characteristics/ Ordering Information Ordering Code PI5A392AQEX Package Code Q Package Type 16-pin 150-mil Wide (QSOP) Operating Temperature -40oC to +85oC Notes: 1. EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. All applicable RoHS exemptions applied. 2. See http://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, “Green” and Lead-free. Thermal characteristics can be found on the company web site at www.diodes.com/design/support/packaging/ 3. E = Pb-free and Green 4. X suffix = Tape/Reel PI5A392A Document Number DS41009 Rev 1-2 8 www.diodes.com May 2018 Diodes Incorporated A product Line of Diodes Incorporated PI5A392A IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2016, Diodes Incorporated www.diodes.com PI5A392A Document Number DS41009 Rev 1-2 9 www.diodes.com May 2018 Diodes Incorporated