SB160-T

Pb SB120 - SB160 1.0A SCHOTTKY BARRIER RECTIFIER Features Mechanical Data            Schottky Barrier Chip Guard Ring Die Construction for Transient Protection Low Power Loss, High Efficiency High Surge Capability High Current Capability and Low Forward Voltage Drop Surge Overload Rating to 40A Peak For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Applications Lead-Free Finish; RoHS Compliant (Notes 1 & 2) For automotive applications requiring specific change control (i.e. parts qualified to AEC-Q100/101/200, PPAP capable, and manufactured in IATF 16949 certified facilities), please contact us or your local Diodes representative. https://www.diodes.com/quality/product-definitions/       Case: DO-41 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Finish – Bright Tin. Plated Leads Solderable per MILSTD-202, Method 208 Polarity: Cathode Band Mounting Position: Any Marking: Type Number Weight: 0.3 grams (Approximate) Ordering Information (Note 3) Device SB120-A SB120-B SB120-T (Note 4) SB130-A SB130-B (Note 4) SB130-T SB140-A SB140-B SB140-T SB150-A SB150-B SB150-T SB160-A SB160-B SB160-T Notes: Packaging DO-41 (Plastic) DO-41 (Plastic) DO-41 (Plastic) DO-41 (Plastic) DO-41 (Plastic) DO-41 (Plastic) DO-41 (Plastic) DO-41 (Plastic) DO-41 (Plastic) DO-41 (Plastic) DO-41 (Plastic) DO-41 (Plastic) DO-41 (Plastic) DO-41 (Plastic) DO-41 (Plastic) Shipping 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 1. EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. All applicable RoHS exemptions applied. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. For packaging details, visit our website at https://www.diodes.com/design/support/packaging/diodes-packaging/. 4. Not recommended for new design. SB120 - SB160 Document number: DS23022 Rev. 6 - 2 1 of 4 www.diodes.com December 2019 © Diodes Incorporated SB120 - SB160 Maximum Ratings and Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 5) (See Figure 1) Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) Forward Voltage (Note 6) @ IF = 1.0A Peak Reverse Current @ TA = +25C at Rated DC Blocking Voltage (Note 6) @ TA = +100C Typical Thermal Resistance Junction to Lead (Note 5) Typical Thermal Resistance Junction to Ambient Operating Temperature Range SB130 SB140 SB150 SB160 Unit 20 30 40 50 60 V 14 21 28 35 42 V IO 1.0 A IFSM 40 A 0.50 VFM 0.70 V 0.5 IRM 10 mA 5.0 C/W C/W 15 50 RJL RJA -65 to +125 -65 to +150 -65 to +150 TSTG C 5. Measured at ambient temperature at a distance of 9.5mm from the case. 6. Short duration pulse test used to minimize self-heating effect. IF, INSTANTANEOUS FORWARD CURRENT (A) I(O), AVERAGE FORWARD CURRENT (A) SB120 TJ Storage Temperature Range Notes: Symbol VRRM VRWM VR VR(RMS) 1.0 0.5 0 25 50 75 100 125 TL, LEAD TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve SB120 - SB160 Document number: DS23022 Rev. 6 - 2 10 Tj = +125°C Tj = +75°C Tj = +25°C 1.0 Tj = -25°C 1% Duty Cycle 0.1 0.2 0.4 0.6 0.8 1.0 1.2 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics - SB120 thru SB140 150 2 of 4 www.diodes.com December 2019 © Diodes Incorporated 10 40 IFSM, PEAK FORWARD SURGE CURRENT (A) IF, INSTANTANEOUS FORWARD CURRENT (A) SB120 - SB160 1.0 T TjJ==+125篊 125°C TjJ==+25篊 25°C T 0.1 1% Duty Cycle 0.01 0.8 1.0 0.2 0.4 0.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 3 Typical Forward Characteristics - SB150 thru SB160 0 8.3ms Single Half Sine-Wave Tj = TMethod) (JEDEC j(max) TJ = TJ (MAX) 30 20 10 0 1 10 100 NUMBER OF CYCLES AT 60 Hz Fig. 4 Max Non-Repetitive Peak Fwd Surge Current 10,000 1,000 CT, TOTAL CAPACITANCE (pF) 1000 100 10 100 1 0.1 10 0.1 1 10 V R, REVERSE VOLTAGE (V) Fig. 5 Typical Total Capacitance 100 0.01 25 75 0 50 100 PERCENTAGE OF PEAK REVERSE VOLTAGE (%) Fig. 6 Typical Reverse Characteristics, SB120 thru SB140 10,000 1,000 100 10 1 0.1 0 50 100 PERCENTAGE OF PEAK REVERSE VOLTAGE (%) Fig. 7 Typical Reverse Characteristics, SB150 thru SB160 SB120 - SB160 Document number: DS23022 Rev. 6 - 2 3 of 4 www.diodes.com December 2019 © Diodes Incorporated SB120 - SB160 Package Outline Dimensions Please see http://www.diodes.com/package-outlines.html for the latest version. DO-41 (Plastic) Dim A B C D DO-41 (Plastic) Min Max 25.40 - 4.06 5.21 0.71 0.864 2.00 2.72 All Dimensions in mm IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2019, Diodes Incorporated www.diodes.com SB120 - SB160 Document number: DS23022 Rev. 6 - 2 4 of 4 www.diodes.com December 2019 © Diodes Incorporated