MQ750

Type MQ MQD1105 EMQD1005A1 3 X 7 mm size RoHS Compliant Quick Acting Micro Fuse Catalog Number Ampere Rating Typical Cold Resistance (ohm) Volt-drop @100% In (Volt) max. Melting I2T < 10 mSec (A2 Sec) Melting I2T @10 In (A2 Sec) Maximum Power Dissipation (W) MQ 100 MQ 125 MQ 150 MQ 200 MQ 250 MQ 300 MQ 375 MQ 500 MQ 750 MQ 1 100mA 125mA 150mA 200mA 250mA 300mA 375mA 500mA 750mA 1A 1.5A 2A 2.5A 3A 3.5A 4A 5A 7A 10A 12A 15.50 2.20 1.60 1.20 0.85 0.62 0.49 0.33 0.19 0.13 0.07 0.054 0.041 0.031 0.027 0.023 0.018 0.012 0.007 0.006 3.00 0.61 0.54 0.48 0.43 0.39 0.35 0.31 0.25 0.22 0.18 0.24 0.22 0.21 0.20 0.19 0.17 0.15 0.098 0.093 0.088 0.0007 0.0012 0.0019 0.003 0.005 0.009 0.013 0.025 0.062 0.11 0.29 0.33 0.59 1.1 1.4 1.9 3.4 8 25 41 70 0.0006 0.0009 0.0015 0.002 0.004 0.008 0.012 0.023 0.056 0.10 0.25 0.27 0.50 0.90 1.2 1.6 3.0 7 21 35 63 0.350 0.087 0.10 0.12 0.14 0.16 0.18 0.21 0.27 0.33 0.42 0.33 0.40 0.48 0.53 0.58 0.71 0.90 1.30 1.50 1.80 Electrical Characteristics Testing current 100% 200% Blow Time Minimum 4 Hrs. N/A Maximum N/A 5 Sec Approvals Safety Agency Approvals r Recognized File No. E20624 r ßc Amp range / Volt @ I.R. ability 100mA - 15A/125V @ 50A AC; 300A DC MQ 1.5 MQ 2 MQ 2.5 MQ 3 MQ 3.5 MQ 4 MQ 5 MQ 7 MQ 10 MQ 12 ß Certified File No. LR39772 RoHS Compliant Product Environmental Specification RoHS Wave Soldering Compatible : (260°C, 10 sec max) Shock Resistance MIL-STD-202G, Method 213B, Test Condition I (100 G’s peak for 6 milliseconds; Sawtooth Waveform) Vibration Resistance 10-55 Hz x 3 axis/ no load (MIL-STD-202, Method 201) Salt Spray Resistance MIL-STD-202, Method 101, Condition B (48Hrs) Solderability MIL-STD-202G, Method 208H Soldering Heat Resistance MIL-STD-202F, Method 210E, Test Condition C. Top Side (260°C, 20 sec) Moisture Resistance MIL-STD-202F, Method 106 Operating Temperature -55°C to 125°C MQ 15 15A 0.004 Consult manufacturer for other ratings On label: “bel”,“MQ”,“Current Rating”,“Voltage Rating”, “Interrupting Rating”, “Appropriate Safety Logos” and “ ” for RoHS Version Packaging 1. In bulk: 1,000 pcs per box 2. On Axial Tape & Reel: 2,500 pcs per reel 3. Tape & Reel specification: per EIA-296-E & IEC 286-1 @ 5mm Pitch and 52.4mm inside Tape Spacing Mechanical Dimensions 0.280" ± 0.020 (7.1 ± 0.5mm) 1.5" ± 0.08 0.125" ± 0.004 (38.1 ± 2.0mm) (3.18 ± 0.1mm) Physical Specification Materials Body: Molded with UL Recognized epoxy component plastic, UL94-V0 Lead Wire: Tin plated Copper, Diameter 0.025" for 7A and less Diameter 0.032" for rating above 7A Marking On fuse: “bel”,“MQ”, “Current Rating”,“125V” printed in white color MQ Diameter 0.025 " + / - 0.001" for 0.1Amp to 7 Amp (0.64 mm + / - 0.025 mm) Diameter 0.032 " + / - 0.001" for 7.1Amp to 15 Amp (0.81 mm + / - 0.025 mm) ORDERING INFORMATION SEE LAST 2 PAGES Bel Fuse Inc. 2 06 Van Vorst Street, Jersey City, NJ 07302 • Tel: 201-432-0463 • Fax: 201-432-9542 • E-Mail: belfuse@belfuse.com Website: www.belfuse.com 29 Specifications subject to change without notice Type MQ Quick Acting Micro Fuse 3 X 7 mm size RoHS Compliant MQC1004 (O02) MQ - TIME CURRENT CHARACTERISTIC CURVE - 100mA - 125mA - 150mA - 200mA - 250mA - 300mA - 375mA - 500mA - 750mA - 1A - 1.5A - 2A - 2.5A - 3A - 3.5A - 4A - 5A - 7A - 10A - 12A - 15A 10000 1000 100 TIME IN SECONDS 10 1 0.1 0.01 0.01 0.1 1 10 100 1000 CURRENT IN AMPERES NOTE - see important information under “User Guide”on P.08 Corporate Office Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: belfuse@belfuse.com Website: www.belfuse.com Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K Tel: 44-1772-556601 Fax: 44-1772-888366 Specifications subject to change without notice 30