V7PB-10B15S

NON-ISOLATED DC/DC CONVERTERS 5V Input / 0.9V – 3.3V Output / 10A V7PB-10B Series • • • • • • • • • • • Nonisolated Industry standard footprint Fixed frequency High efficiency means less power dissipation Excellent thermal performance Optimized for cost Remote on/off Remote sense Undervoltage lockout (UVLO) Over current and short circuit protection Industrial temperature range POWER PRODUCTS BP03V7PB-10B Description The Bel V7PB-10B modules are a series of non-isolated, step down DC/DC power converters that operate from a nominal 5V source. These converters are available in a range of output voltages from 0.9V to 3.3V. They are packaged in a compact, SIP package rated at 10A. Standard features include remote on/off, over current and short circuit protection, output voltage adjust and industrial temperature range (-40° to +85° C). The output is closely regulated and the efficiency is typically 95.5% @ 3.3V output at full load. These products may be used almost anywhere low voltage silicon is employed and a 5V source is available. Typical applications include file servers, routers, line cards and other computing and communications equipment. Applications • • • • Distributed power architectures Data networking equipment Telecommunications Computers and peripherals Part Number Selection Output Voltage 3.3V 2.5V 1.8V 1.5V 1.2V 0.9V Input Voltage 5V 5V 5V 5V 5V 5V Max. Output Current 10A 10A 10A 10A 10A 10A Max. Output Power 33W 25W 18W 15W 12W 9W Typical Efficiency 95.5% 94% 92% 91% 90% 87% Part Number Remote Sense Active Low V7PB-10B33L V7PB-10B25L V7PB-10B18L V7PB-10B15L V7PB-10B12L V7PB-10B09L Part Number Remote Sense Active High V7PB-10B33S V7PB-10B25S V7PB-10B18S V7PB-10B15S V7PB-10B12S V7PB-10B09S ©2003 Bel Fuse Inc. Specifications subject to change without notice. 08.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 POWER PRODUCTS BP03V7PB-10B NON-ISOLATED DC/DC CONVERTERS 5V Input / 0.9V – 3.3V Output / 10A Absolute Maximum Ratings Parameter Continuous Input Voltage Output Enable Terminal Voltage Ambient Temperature Storage Temperature Symbol Vin Vouten Tamb Tstor Min -0.3 -0.3 -40 -55 Typical Max 6 6 85 105 Unit V V °C °C Note: Use beyond the maximum ratings may cause a reliability degradation of the DC/DC converter or may permanently damage the device. Input Specifications Parameter Operating Input Voltage Input Current 3.3V 2.5V 1.8V 1.5V 1.2V 0.9V No Load Input Current 3.3V 2.5V 1.8V 1.5V 1.2V 0.9V Remote Off Input Current 3.3V 2.5V 1.8V 1.5V 1.2V 0.9V Input Reflected Ripple Current1 3.3V 2.5V 1.8V 1.5V 1.2V 0.9V Input Reflected Ripple Current 1 3.3V 2.5V 1.8V 1.5V 1.2V 0.9V I2t Inrush Current Transient 3.3V 2.5V 1.8V 1.5V 1.2V 0.9V Turn On Voltage Threshold Turn Off Voltage Threshold ©2003 Bel Fuse Inc. Module All Symbol Vin Iin Min 4.5 Typical 5 Max 5.5 Units V A 8.7 6.7 4.9 4.2 3.4 2.6 mA 85 130 130 140 100 140 120 180 180 180 140 180 mA 5 5 8 4 4 4 10 10 10 10 10 10 mArms 35 40 30 30 30 20 50 50 50 50 50 50 mApk 120 120 100 90 90 70 180 180 180 180 180 180 A2s 0.0093 0.0089 0.0050 0.0022 0.0015 0.0018 4.25 3.85 V V All All Note: Input capacitance two 270µF/16V, ESR = 0.018 Ω max at 100kHz @ 25°C. 1. With simulated source impedance of 500nH, 5Hz to 20MHz. Specifications subject to change without notice. 08.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 2 NON-ISOLATED DC/DC CONVERTERS 5V Input / 0.9V – 3.3V Output / 10A Output Specifications Parameter Output Voltage Set Point 1 3.3V 2.5V 1.8V 1.5V 1.2V 0.9V Load Regulation 3.3V 2.5V 1.8V 1.5V 1.2V 0.9V Line Regulation 3.3V 2.5V 1.8V 1.5V 1.2V 0.9V Regulation Over Temperature 3.3V 2.5V 1.8V 1.5V 1.2V 0.9V Total Output Voltage Regulation 3.3V 2.5V 1.8V 1.5V 1.2V 0.9V Output Ripple and Noise 2 3.3V 2.5V 1.8V 1.5V 1.2V 0.9V Output Ripple and Noise 2 3.3V 2.5V 1.8V 1.5V 1.2V 0.9V Output Current Range Output DC Current Limit Shor t Circuit Surge 3.3V 2.5V 1.8V 1.5V 1.2V 0.9V Turn on Time Overshoot at Turn On Output Capacitance All All All Cout 0 Ton All All Iout Ioutlim Ioutsurge 0.194 0.215 0.193 0.170 0.160 0.197 6 0 10 3 5600 ms % µF 0 13 10 10 10 10 6 5 15 15 15 15 10 10 10 25 A A A2s 30 35 30 30 25 20 45 50 45 45 35 30 mVrms 43 50 38 27 22 17 66.5 70 54.5 42 37 32 mVpk 30 40 30 20 15 10 40 50 40 30 25 20 mV 5 4 3 3 3 3 10 7.5 5.5 4.5 4.5 4.5 mV 8 6 5 4 4 4 16.5 12.5 9.0 7.5 7.5 7.5 mV Module Symbol Vout 3.234 2.450 1.764 1.470 1.176 0.882 3.3 2.5 1.8 1.5 1.2 0.9 3.366 2.550 1.836 1.530 1.224 0.918 mV Min Typical Max Units V POWER PRODUCTS BP03V7PB-10B Note: All specifications are typical at nominal input, full load at 25° C unless otherwise stated. 1. Vin = 5V, Iout = full load, Ta = 25° C. 2. 0 - 20MHz, 1µF ceramic cap on output. ©2003 Bel Fuse Inc. Specifications subject to change without notice. 08.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 3 POWER PRODUCTS BP03V7PB-10B NON-ISOLATED DC/DC CONVERTERS 5V Input / 0.9V – 3.3V Output / 10A Output Specifications Parameter Transient Response 3 Module Symbol Min Typical Max Units ∆V 50% to 100% of Max Load Settling Time 3.3V ∆V 100% to 50% of Max Load Settling Time Transient Response 3 120 Ts 30 130 Ts 30 160 60 160 60 mV µs mV µs ∆V 50% to 100% of Max Load Settling Time 2.5V ∆V 100% to 50% of Max Load Settling Time Transient Response 3 80 Ts 30 90 Ts 30 120 60 120 60 mV µs mV µs ∆V 50% to 100% of Max Load Settling Time 1.8V ∆V 100% to 50% of Max Load Settling Time Transient Response 3 90 Ts 30 90 Ts 30 120 60 120 60 mV µs mV µs ∆V 50% to 100% of Max Load Settling Time 1.5V ∆V 100% to 50% of Max Load Settling Time Transient Response 3 90 Ts 30 90 Ts 30 120 60 120 60 mV µs mV µs ∆V 50% to 100% of Max Load Settling Time 1.2V ∆V 100% to 50% of Max Load Settling Time Transient Response 3 80 Ts 30 80 Ts 30 110 60 110 60 mV µs mV µs ∆V 50% to 100% of Max Load Settling Time 0.9V ∆V 100% to 50% of Max Load Settling Time Ts Ts 80 30 80 30 100 60 100 60 mV µs mV µs Note: All specifications are typical at nominal input, full load at 25° C unless otherwise stated. 3. di/dt = 0.5A/1µS, Ta = 25° C without external load capacitance. ©2003 Bel Fuse Inc. Specifications subject to change without notice. 08.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 4 NON-ISOLATED DC/DC CONVERTERS 5V Input / 0.9V – 3.3V Output / 10A General Specifications Parameter Efficiency1 3.3V 2.5V 1.8V 1.5V 1.2V 0.9V Switching Frequency All All Fsw Module Symbol η 92.5 91 89 88 87 84 250 90 95.5 94 92 91 90 87 300 340 110 10 All 9.2 Min Typical Max POWER PRODUCTS BP03V7PB-10B Units % kHz Output Voltage Trim Range2 Remote Sense Compensation Weight % % g 1. Vin=5V, full load and Ta=25° C. 2. See graphs on pages 12 - 17. Control Specifications Parameter Remote On/Off 3 Module All Symbol Vouten Min Typical Max Units V Signal Low (Unit Off) V7PB-10BxxS Signal High (Unit On) Signal Low (Unit On) V7PB-10BxxL Signal High (Unit Off) -0.3 2.5 -0.3 2.5 0.8 5.5 0.8 5.5 V V V V 3. With remote on/off pin 11 open, the module is on. Note: On/off pin designed to work with an open collector/drain switch. ©2003 Bel Fuse Inc. Specifications subject to change without notice. 08.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 5 POWER PRODUCTS BP03V7PB-10B NON-ISOLATED DC/DC CONVERTERS 5V Input / 0.9V – 3.3V Output / 10A Efficiency Data Module 3.3V 100% 95% 90% 85% 80% 1 2 3 4 5 6 7 8 9 10 Output Current 4.5V 5V 5.5V Efficiency Module 2.5V 100% 95% Efficiency 90% 85% 80% 75% 70% 1 2 3 4 5 6 7 8 9 10 Output Current 4.5V 5V 5.5V Module 1.8V 95% 90% Efficiency 85% 80% 75% 70% 65% 1 2 3 4 5 6 7 8 9 10 Output Current 4.5V 5V 5.5V ©2003 Bel Fuse Inc. Specifications subject to change without notice. 08.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 6 NON-ISOLATED DC/DC CONVERTERS 5V Input / 0.9V – 3.3V Output / 10A Efficiency Data Module 1.5V 95% 90% 85% 80% 75% 70% 65% 60% 1 2 3 4 5 6 7 8 9 POWER PRODUCTS BP03V7PB-10B Efficiency 10 Output Current 4.5V 5V 5.5V Module 1.2V 95% 90% 85% 80% 75% 70% 65% 60% 1 2 3 4 5 6 7 8 9 10 Output Current 4.5V 5V 5.5V Efficiency Module 0.9V 90% 85% 80% 75% 70% 65% 60% 55% 50% 1 2 3 4 5 6 7 8 9 10 Output Current 4.5V 5V 5.5V Efficiency ©2003 Bel Fuse Inc. Specifications subject to change without notice. 08.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 7 POWER PRODUCTS BP03V7PB-10B NON-ISOLATED DC/DC CONVERTERS 5V Input / 0.9V – 3.3V Output / 10A Ripple and Noise 1µF ceramic cap added at the output. Ripple and noise at full load and 5Vdc input, 3.3Vdc output and Ta=25° C Ripple and noise at full load and 5Vdc input, 2.5Vdc output and Ta=25° C Ripple and noise at full load and 5Vdc input, 1.8Vdc output and Ta=25° C Ripple and noise at full load and 5Vdc input, 1.5Vdc output and Ta=25° C Ripple and noise at full load and 5Vdc input, 1.2Vdc output and Ta=25° C ©2003 Bel Fuse Inc. Specifications subject to change without notice. 08.03 Ripple and noise at full load and 5Vdc input, 0.9Vdc output and Ta=25° C Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 8 NON-ISOLATED DC/DC CONVERTERS 5V Input / 0.9V – 3.3V Output / 10A Transient Response Transient response: di/dt = 0.5A/µS, no external load capacitance POWER PRODUCTS BP03V7PB-10B Vout=3.3V 50% to 100% load transients at 5V input and Ta=25° C Vout=3.3V 100% to 50% load transients at 5V input and Ta=25° C Vout=2.5V 50% to 100% load transients at 5V input and Ta=25° C Vout=2.5V 100% to 50% load transients at 5V input and Ta=25° C Vout=1.8V 50% to 100% load transients at 5V input and Ta=25° C Vout=1.8V 100% to 50% load transients at 5V input and Ta=25° C ©2003 Bel Fuse Inc. Specifications subject to change without notice. 08.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 9 POWER PRODUCTS BP03V7PB-10B NON-ISOLATED DC/DC CONVERTERS 5V Input / 0.9V – 3.3V Output / 10A Transient Response Transient response: di/dt = 0.5A/µS, no external load capacitance Vout=1.5V 50% to 100% load transients at 5V input and Ta=25° C Vout=1.5V 100% to 50% load transients at 5V input and Ta=25° C Vout=1.2V 50% to 100% load transients at 5V input and Ta=25° C Vout=1.2V 100% to 50% load transients at 5V input and Ta=25° C Vout=0.9V 50% to 100% load transients at 5V input and Ta=25° C ©2003 Bel Fuse Inc. Specifications subject to change without notice. 08.03 Vout=0.9V 100% to 50% load transients at 5V input and Ta=25° C Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 10 NON-ISOLATED DC/DC CONVERTERS 5V Input / 0.9V – 3.3V Output / 10A POWER PRODUCTS BP03V7PB-10B Thermal Considerations V7PB-10B Output Voltage Set-Point Adjustment Trim Down Circuit Vout Sense Module Trim Gnd Rtrim Down Trim Up Circuit Vout Sense Module Trim Rtrim Up Gnd ©2003 Bel Fuse Inc. Specifications subject to change without notice. 08.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 11 POWER PRODUCTS BP03V7PB-10B NON-ISOLATED DC/DC CONVERTERS 5V Input / 0.9V – 3.3V Output / 10A Output Voltage Set-Point Adjustment V7PB-10B33S Trim Resistor Calculation Vo_n om = 3.302 Unit:Volt 7.5 ( Vo_adj − 0.8) Vo_n om − Vo_adj 6 Vo_adj − Vo_n om − 4.99 Unit:Kohm Rt rim_down( Vo_adj) : = = Rt rim_up( Vo_adj) : − 4.99 Unit:Kohm V7P B-10B33S Rt rim_down Curve 1240.7 941.53 Rtrim_down ( Vo_adj) 642.36 343.19 44.02 2.97 3.03 3.1 Vo_adj 3.16 3.23 3.29 V7P B-10B33S Rt rim_up Curve 605.38 457.36 Rtrim_up ( Vo_adj) 309.34 161.33 13.31 3.31 3.37 3.44 Vo_adj 3.5 3.57 3.63 ©2003 Bel Fuse Inc. Specifications subject to change without notice. 08.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 12 NON-ISOLATED DC/DC CONVERTERS 5V Input / 0.9V – 3.3V Output / 10A POWER PRODUCTS BP03V7PB-10B Output Voltage Set-Point Adjustment V7PB-10B25S Trim Resistor Calculation Vo_n om = 2.503 Unit:Volt 2.37 ( Vo_adj − 0.8) Vo_n om − Vo_adj 1.896 Vo_adj − Vo_n om − 4.99 Unit:Kohm = Rt rim_down( Vo_adj) : = Rt rim_up( Vo_adj) : − 4.99 Unit:Kohm V7P B-10B25S Rt rim_down Curve 242.01 183.65 Rtrim_down ( Vo_adj) 125.3 66.94 8.59 2.25 2.3 2.35 Vo_adj 2.39 2.44 2.49 V7P B-10B25S Rt rim_up Curve 216.91 163.36 Rtrim_up ( Vo_adj) 109.8 56.25 2.69 2.51 2.56 2.61 Vo_adj 2.65 2.7 2.75 ©2003 Bel Fuse Inc. Specifications subject to change without notice. 08.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 13 POWER PRODUCTS BP03V7PB-10B NON-ISOLATED DC/DC CONVERTERS 5V Input / 0.9V – 3.3V Output / 10A Output Voltage Set-Point Adjustment V7PB-10B18S Trim Resistor Calculation Vo_n om = 1.802 Unit:Volt 2.37 ( Vo_adj − 0.8) Vo_n om − Vo_adj 1.896 Vo_adj − Vo_n om − 4.99 Unit:Kohm Rt rim_down( Vo_adj) : = = Rt rim_up( Vo_adj) : − 4.99 Unit:Kohm V7P B-10B18S Rt rim_down Curve 182.97 147.51 112.05 Rtrim_down ( Vo_adj) 76.59 41.12 5.66 1.62 1.65 1.69 Vo_adj 1.72 1.76 1.79 V7P B-10B18S Rt rim_up Curve 198.92 150.61 Rtrim_up ( Vo_adj) 102.31 54 5.69 1.81 1.84 1.88 Vo_adj 1.91 1.95 1.98 ©2003 Bel Fuse Inc. Specifications subject to change without notice. 08.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 14 NON-ISOLATED DC/DC CONVERTERS 5V Input / 0.9V – 3.3V Output / 10A POWER PRODUCTS BP03V7PB-10B Output Voltage Set-Point Adjustment V7PB-10B15S Trim Resistor Calculation Vo_n om = 1.502 Unit:Volt 2.37 ( Vo_adj − 0.8) Vo_n om − Vo_adj 1.896 Vo_adj − Vo_n om − 4.99 Unit:Kohm Rt rim_down( Vo_adj) : = = Rt rim_up( Vo_adj) : − 4.99 Unit:Kohm V7P B-10B15S Rt rim_down Curve 131.21 105.69 80.16 Rtrim_down ( Vo_adj) 54.64 29.11 3.59 1.35 1.38 1.41 Vo_adj 1.43 1.46 1.49 V7P B-10B15S Rt rim_up Curve 232.2 187.32 142.45 Rtrim_up ( Vo_adj) 97.57 52.7 7.82 1.51 1.54 1.57 Vo_adj 1.59 1.62 1.65 ©2003 Bel Fuse Inc. Specifications subject to change without notice. 08.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 15 POWER PRODUCTS BP03V7PB-10B NON-ISOLATED DC/DC CONVERTERS 5V Input / 0.9V – 3.3V Output / 10A Output Voltage Set-Point Adjustment V7PB-10B12S Trim Resistor Calculation Vo_n om = 1.203 Unit:Volt 2.49 ( Vo_adj − 0.8) Vo_n om − Vo_adj 1.992 Vo_adj − Vo_n om − 2.37 Unit:Kohm = Rt rim_down( Vo_adj) : = Rt rim_up( Vo_adj) : − 2.37 Unit:Kohm V7P B-10B12S Rt rim_down Curve 72.8 58.9 45 Rtrim_down ( Vo_adj) 31.1 17.2 3.3 1.08 1.1 1.12 Vo_adj 1.15 1.17 1.19 V7P B-10B12S Rt rim_up Curve 226.06 173.2 Rtrim_up ( Vo_adj) 120.35 67.5 14.64 1.21 1.23 1.25 Vo_adj 1.28 1.3 1.32 ©2003 Bel Fuse Inc. Specifications subject to change without notice. 08.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 16 NON-ISOLATED DC/DC CONVERTERS 5V Input / 0.9V – 3.3V Output / 10A POWER PRODUCTS BP03V7PB-10B Output Voltage Set-Point Adjustment V7PB-10B09S Trim Resistor Calculation Vo_n om = 0.903 Unit:Volt 1.05 ( Vo_adj − 0.8) Vo_n om − Vo_adj 0.84 Vo_adj − Vo_n om − 0.01 Unit:Kohm = Rt rim_down( Vo_adj) : = Rt rim_up( Vo_adj) : − 0.01 Unit:Kohm V7P B-10B09S Rt rim_down Curve 31.68 25.36 19.05 Rtrim_down ( Vo_adj) 12.73 6.42 0.1 0.81 0.83 0.85 Vo_adj 0.86 0.88 0.9 V7P B-10B09S Rt rim_up Curve 125.62 102.23 78.84 Rtrim_up ( Vo_adj) 55.45 32.07 8.68 0.91 0.93 0.95 Vo_adj 0.96 0.98 1 ©2003 Bel Fuse Inc. Specifications subject to change without notice. 08.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 17 POWER PRODUCTS BP03V7PB-10B NON-ISOLATED DC/DC CONVERTERS 5V Input / 0.9V – 3.3V Output / 10A Mechanical V7PB-10B 0.387 [9.84] 0.224 [5.70] 2.00 [50.80] 0.55 [13.97] 0.063 [1.60] 0.15 [3.81] 0.025 [0.64] 0.05 [1.27] 0.09 [2.30] max 0.10 [2.54] 12345 6 7 8 91011 Pin 1 2 3 4 5 6 7 8 9 10 11 Function +Vo +Vo Remote Sense Option +Vo Ground Ground +Vin +Vin No Pin Trim Remote On/Off ©2003 Bel Fuse Inc. Specifications subject to change without notice. 08.03 CORPORATE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com FAR EAST Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 18