8136R5KL.25

MODEL 8136 7/8” Diameter Plastic 10-Turn Hybrid Precision Potentiometer / Position Sensor FEATURES 2 Plastic Shaft & Bushing ELECTRICAL Resistance Range, Ohms Standard Resistance Tolerance Independent Linearity Power Rating, Watts Dielectric Strength Insulation Resistance, Minimum Output Smoothness, Maximum Actual Electrical Travel, Nominal Tap Tolerance (Voltage Tap Only) End Voltage, Maximum Resolution Temperature Coefficient ENVIRONMENTAL (MIL-R-12934) 1K to 100K ±10% ±0.25% 2.0 at 25°C derating to 0 at 105°C 1,000V rms 1,000 Megohms 100 Ohms 3600° ±0.05% of input voltage 0.2% of input voltage Essentially Infinite +100ppm/°C, -150ppm/°C Operating Temperature Range Temperature Cycling Shock, 6ms Sawtooth Vibration Moisture Resistance High Temperature Exposure Rotational Load Life Specifications subject to change without notice. –25°C to +105°C 5 cycles, –25°C to +105°C (5% ∆R) 100G’s (0.1ms discontinuity max.) 10G’s, 10 to 500 Hz (5% ∆R, 0.1ms discontinuity max.) Five 24 hour cycles (3% ∆R) 1,000 hours at 105°C (5% ∆R) 1 mil. shaft rev. + 900 hrs. at rated wattage at 25°C (5% ∆R) 2-119 Model 8136 MECHANICAL Total Mechanical Travel Number of Gangs, Maximum Weight, Nominal Static Stop Strength Backlash, Maximum Panel Nut Tightening Torque, Maximum Shaft End Play, Maximum Start/Run Torque, Maximum OUTLINE DIMENSIONS (Inch/mm) 3600° + 15° – 0° 1 0.42 oz. 60 oz.-in. 2° 8 lb.-in. .010” 1.5 oz.-in. .750±.040 19.1±1.02 Mounting Surface .249±.001 Dia. 6.33±0.03 Slider CCW CW .812±.031 20.6±0.79 Adjustment Slot: .047±.005/1.19±0.13 Wide X +.015 +0.38 .063 -.000/1.60 -0.00 Deep X .195±.015/4.95±0.38 Long 75° Max. .625 R Max. 15.9 .404±.002 Dia. 10.3±0.05 +.000 .062 -.010 +0.00 1.58 -0.25 Anti-Rotation Pin .060±.005/1.52±0.13 Dia. on .290±.005/7.37±0.13 Radius. Extends .040±.010/1.02±0.25 From Mounting Surface 3/8 - 32 UNEF Thread .312±.016 7.93±0.41 .875±.016 Dia. 22.2±0.41 OPTIONAL TERMINAL CONFIGURATION 40° VIEW B SLIDER .625 R MAX 15.9 R MAX .110 2.794 .020 Thickness .060 ± .003 Dia. 1.524 ± .076 .062 ± .003 1.524 ± .076 Use Special Feature Code “FT” to order. Enlarged View B 2-120 Model 8136 STANDARD RESISTANCE VALUES, OHMS 1K 2K 5K 10K 20K 50K 100K SPECIAL FEATURES Center Tap Linearity Tape Flatted Shaft Shaft Lock Gold Plated Solder Lug Terminals (see optional terminal configuration) ORDERING INFORMATION CT LT FS SL FT 2 8136 R 10K L .25 Model Series Resistance Prefix Linearity Resistance Value MATCHING TURNS COUNTING DIALS 2606, 2606S, 2607, 2607S, 2626, 2627, 2646, 2646S, 2647, 2647S, 2126, RB METRIC CONVERSIONS 1 in. 1 oz. CIRCUIT DIAGRAM 25.4 mm 28.4 gm 1 oz.-in. 1 lb.-in. NOTES 0,007 N-m 0,113 N-m (S) (CCW) (CW) Metric equivalents, based on 1 inch = 25.4mm are rounded to the same number of significant figures as in the original English units and are provided for general information only. Tolerances unless otherwise specified: Linear = ± .01 inches (.25mm) Angular = ± 2 degrees INCH mm 2-121 Model 8136