PEL12S-4220F-N3024

T PL IA N M Features ■ Compact design, long life and high *R oH S CO reliability ■ Vertical and horizontal mount versions ■ Flatted and knurled shaft styles ■ Variety of LED colors available ■ Bushing and bushingless options PEL12S - 12 mm Encoder with Illuminated Shaft Electrical Characteristics Output .....................................................................................................................................................................................2-bit quadrature code Closed Circuit Resistance ........................................................................................................................................................... 3 ohms maximum Contact Rating .............................................................................................................................................................................. 0.5 mA @ 5 VDC Insulation Resistance ....................................................................................................................................................100 megohms @ 250 VDC Dielectric Withstanding Voltage Sea Level ................................................................................................................................................................................ 300 VAC minimum Electrical Travel ......................................................................................................................................................................................Continuous Contact Bounce (15 RPM).........................................................................................................................................................2.0 ms. maximum** RPM (Operating) ............................................................................................................................................................................ 100 maximum** Environmental Characteristics Operating Temperature Range .......................................................................................................................-10 °C to +70 °C (+14 °F to +158 °F) Storage Temperature Range .......................................................................................................................... -40 °C to +85 °C (-40 °F to +185 °F) Operating Humidity ..................................................................................................................................................................... 25 % to 85 % R.H. Rotational Life..................................................................................................................................................................... 30,000 cycles minimum IP Rating ...........................................................................................................................................................................................................IP 40 Mechanical Characteristics Mechanical Angle .......................................................................................................................................................................... 360 ° continuous Detent Torque ..................................................................................................................................................30 to 200 g-cm (0.42 to 2.77 oz.-in.) Running Torque ...................................................................................................................................................... 50 g-cm (0.69 oz-in.) maximum Shaft Strength (Push) ...................................................................................................................................................................... 5 kgf (11.0 lbs.) Shaft Strength (Pull) ...................................................................................................................................................................... 10 kgf (22.0 lbs.) Weight ............................................................................................................................................................................... 3 gm (0.1 oz.) maximum Terminals .................................................................................................................................................................. Printed circuit board terminals Soldering Condition Wave Soldering ..................................................................... Sn95.5/Ag2.8/Cu0.7 solder with no-clean flux: 260 °C max. for 5 ± 1 seconds Hand Soldering .................................................................................................................................................................. Not recommended Hardware ................................................................................... One flat washer and one mounting nut supplied with each encoder with bushing How To Order PEL12S - 4 0 20 F - N 1 024 Model Terminal Configuration 2 = Vertical Mount/Side Exit PC Pin 4 = Horizontal Mount/Rear Exit PC Pin Detent Option 0 = No Detents 2 = 24 Detents Standard Shaft Length Flatted: Knurled: 15 = 15.0 mm 25 = 25.0 mm 24 = 24.0 mm 17 = 17.5 mm 30 = 30.0 mm 20 = 20.0 mm Shaft Style F = Insulated Flatted Shaft S = Insulated Knurled Shaft (18 Teeth) G = Insulated Flatted Shaft w/Bushing*** T = Insulated Knurled Shaft (18 Teeth) w/Bushing Switch Configuration N = No Switch LED Color Single: 1 = Red 3 = Blue 5 = White 2 = Green 4 = Orange Resolution 024 = 24 Pulses per 360 ° Rotation *** Available in 17.5, 20 and 25 mm shaft lengths. WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. **Devices are tested using standard noise reduction filters. For optimum performance, designers should use noise reduction filters in their circuits. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Applications Level control, tuning and timer settings in: ■ Audio-visual equipment ■ Consumer electric appliances ■ Musical instrumentation ■ Communications equipment PEL12S - 12 mm Encoder with Illuminated Shaft Product Dimensions PEL12S-4xxxS-Nxxxx (Horizontal Mount w/Single LED, No Switch, Knurled Shaft) MOUNTING SURFACE 24.0 (.945) 6.0 (.236) 3.5 (.138) 14.0 (.551) 18.0 (.709) 12.4 (.488) 5.0 (.197) 0.8 (.031) 13.2 ± 0.1 (.520 ± .004) 8.2 (.323) 7.0 (.276) 2.0 ± 0.1 (.079 ± .004) 18 TEETH 13.2 (.520) 10.2 (.402) 3.5 (.138) 2 PLCS. 2.1 +0.1/-0 (.083 +.004/-0) 7.0 ± 0.1 (.276 ± .004) 7.5 ± 0.1 (.295 ± .004) 6.0 (.236) DIA. 6.8 DIA. (.268) LED 5.0 ± 0.1 (.197 ± .004) A C B 5.0 ± 0.1 (.197 ± .004) 5.0 (.197) 0.9 ± 0.1 (.035 ± .004) 2.0 +0.1/-0 (.079 +.004/-0) 2 PLCS. A C B 1.1 +0.2/-0 (.043 +.008/-0) DIA. 5 PLCS. TERMINAL DETAIL PEL12S-4xxxF-Nxxxx (Horizontal Mount w/Single LED, No Switch, Flatted Shaft) MOUNTING SURFACE 6.0 (.236) 3.5 (.138) 14.0 (.551) LM 5.0 (.197) 12.4 (.488) L1 0.8 (.031) 1.5 (.591) 2.0 ± 0.1 (.079 ± .004) 8.2 (.323) 0.5 (.020) 13.2 (.520) 10.2 (.402) 3.5 (.138) 6.8 (.268) DIA. 4.5 ± 0.05 (.177 ± .002) 6.0 ± 0.1 DIA. (.236 ± .004) A C B 5.0 (.197) L1 LM 3 (.118) 15 (.591) 5 (.197) 17.5 (.689) 7 (.276) 20 (.787) 12 (.472) 25 (.984) 12 (.472) 30 (1.181) DIMENSIONS: MM (INCHES) Single LED Circuit (+) UNDER TOLERANCES: 10.0 ±0.3 ±0.5 10.0 ~ 100 = = (.394) (±.012) (.394 ~ 3.937) (±.020) (-) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. PEL12S - 12 mm Encoder with Illuminated Shaft Product Dimensions PEL12S-2xxxS-Nxxxx (Vertical Mount w/Single LED, No Switch, Knurled Shaft) 24.0 (.945) 6.0 (.236) 2.4 (.094) 18.0 (.709) 5.0 (.197) 0.8 (.031) 3.5 ± 0.1 (.138 ± .004) 12.4 (.488) 2.5 ± 0.1 (.098 ± .004) 8.2 (.323) 7.0 (.276) LED 5.0 ± 0.1 (.197 ± .004) B 18 TEETH 10.0 (.394) 13.2 (.520) 10.2 (.402) 6.0 (.236) DIA. 6.8 DIA. (.268) 2.0 +0.1/-0 (.079 +.004/-0) 2 PLCS. A 3.5 (.138) 10.8 ± 0.1 (.425 ± .004) C B C A 1.1 +0.2/-0 (.043 +.008/-0) DIA. 5 PLCS. 2.1 +0.1/-0 (.083 +.004/-0) 2 PLCS. 10.0 (.394) 2.0 (.079) 5.1 (.201) PEL12S-2xxxF-Nxxxx (Vertical Mount w/Single LED, No Switch, Flatted Shaft) LM 6.0 (.236) 2.4 (.094) 12.4 (.488) L1 5.0 (.197) 0.8 (.031) 1.5 (.591) 8.2 (.323) 0.5 (.020) 13.2 (.520) 10.2 (.402) 10.0 (.394) 6.8 (.268) DIA. 4.5 ± 0.05 (.177 ± .002) DIA. 6.0 ± 0.1 (.236 ± .004) A 3.5 (.138) 2.0 (.079) 10.0 (.394) C B L1 LM 3 (.118) 15 (.591) 5 (.197) 17.5 (.689) 7 (.276) 20 (.787) 12 (.472) 25 (.984) 12 (.472) 30 (1.181) DIMENSIONS: 5.1 (.201) UNDER MM (INCHES) TOLERANCES: 10.0 ±0.3 ±0.5 10.0 ~ 100 = = (.394) (±.012) (.394 ~ 3.937) (±.020) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. PEL12S - 12 mm Encoder with Illuminated Shaft Product Dimensions Suggested Filter Circuit PEL12S-4xxxT-Nxxxx (Horizontal Mount w/Single LED, No Switch, Knurled Shaft w/Bushing) 6.5 (.256) 24.0 (.945) 5 VDC 10K OHMS 17.5 (.689) 7.0 (.276) 10K OHMS 10K OHMS 10K OHMS TERMINAL A 7.0 (.276) 0.3 (.012) TERMINAL B 0.01 μF 0.01 μF ENCODER TERMINAL C 18 TEETH M9 X 6.0 DIA. (.236) 0.75 (.030) Quadrature Output Table CW PEL12S-4xxxG-Nxxxx (Horizontal Mount w/Single LED, No Switch, Flatted Shaft w/Bushing) OFF LM A Signal ON L1 5.0 (.199) L2 0.75 M9 X (.030) DIMENSIONS: UNDER L2 L1 LM 5 (.197) 11 (.433) 17.5 (.689) 7 (.276) 13.5 (.532) 20 (.787) 12 (.472) 18.5 (.728) 25 (.984) B Signal D CCW MM (INCHES) TOLERANCES: 10.0 ±0.3 10.0 ~ 100 ±0.5 = = (.394) (±.012) (.394 ~ 3.937) (±.020) LED Characteristics (Single) LED Color Power Dissipation (mW) DC Forward Current (mA) Forward Voltage (V) Typ. Max. Red 58 25 1.8 2.3 Green 53 25 2.0 2.5 Blue 80 20 3.5 4.0 Orange 100 30 2.2 2.6 White 120 30 3.4 4.0 Notes: Reverse Current: 10 μA Reverse Voltage: 5 VDC Test Condition (IF): 20 mA Asia-Pacific: Tel: +886-2 2562-4117 Email: asiacus@bourns.com Europe: Tel: +36 88 885 877 Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 Email: americus@bourns.com www.bourns.com REV. 09/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL