SM13072APEL

AE C * A P Ro P R HS OV C ED OM (S PL el IAN ec T t M od el s) *R & oHS AE C C OM AP P PR LI OV A N ED T Ro VE LEA HS RS D C ION FRE OM S PL AR IA E NT * 1.27 ± 0.05 (0.05 ± 0.002) Electrical Specifications @ 25 °C Inductance (100 kHz, 0.1 V, 8 mADC) ......................................... 350 µH Min. Leakage Inductance (100 kHz, 0.1 V) TD with TX Shorted.......... 0.5 µH Max. RD with RX Shorted......... 0.5 µH Max. Cww (TD to TX & RD to RX @ 100 kHz, 0.1 V).................35 pF Max. Turns Ratio TD : TX.............................. 1 : 1 (±2 %) RD : RX............................. 1 : 1 (±2 %) DCR TD & RD......................... 1.4 ohm Max. TX & RX......................... 1.0 ohm Max. Insertion Loss (TD to TX & RD to RX) 1-100 MHz........................-1.1 dB Max. Return Loss (TD to TX & RD to RX with 100 ohm load) 1-40 MHz............................-16 dB Min. 40-100 MHz ............ -10+20*log (f/80 MHz) dB Min. Cross Talk (Between Each Channel) 1-60 MHz............................-40 dB Min. 60-100 MHz........................-35 dB Min. Common Mode Rejection (TD to TX & RD to RX) 1-60 MHz............................-37 dB Min. 60-100 MHz........................-30 dB Min. Differential to Common Mode Rejection Ratio (TD to TX & RD to RX) 30 MHz...............................-35 dB Min. 60 MHz...............................-35 dB Min. Hi-Pot (TD to TX & RD to RX @ 1 mA, 60 sec.) ........................ 1500 Vrms & 2250 Vdc Storage Temperature........-40 to +125 °C Operating Temperature.....-40 to +125 °C Packaging Specifications Tape & Reel........................ 600 pcs./reel Features Applications n IEEE 802.3 Ethernet compatible n Automotive n Fully integrated for adapter, hub and motherboard applications n Expanded temperature range: -40 to +125 °C n AEC-Q200 Qualified, automotive grade n RoHS compliant* n LAN n Ethernet 0.46 ± 0.05 (0.018 ± 0.002) 0.25 ± 0.13 (0.01 ± 0.005) 0.30 ± 0.10 (0.012 ± 0.004) 0 ˚~8 ˚ 0.70 ± 0.15 (0.028 ± 0.006) SM13072APEL - 10/100 Base-T Transformer Product Dimensions Recommended Layout 12.80 ± 0.25 (0.504 ± 0.010) 8.89 (0.350) TYP. 8.89 ± 0.25 (0.350 ± 0.010) 6.90 ± 0.25 (0.272 ± 0.010) 5.65 ± 0.25 (0.222 ± 0.010) SM13072APL 10.50 TYP. (0.413) 7.10 TYP. (0.280) 9.50 ± 0.25 (0.374 ± 0.010 PIN 1 1.27 ± 0.05 (0.05 ± 0.002) TYP. 0.76 (0.030) 1.27 TYP. (0.05) DIMENSIONS: 5.65 ± 0.25 (0.222 ± 0.010) 0.46 ± 0.05 (0.018 ± 0.002) 0.25 ± 0.13 (0.01 ± 0.005) 0.30 ± 0.10 (0.012 ± 0.004) 0 ˚~8 ˚ How To Order Model MM (INCHES) SM13072 A P E L AEC-Q200 Qualified Automotive Grade Construction P = Potted Packaging E = Tape and Reel (600 pcs./reel) 0.70 ± 0.15 (0.028 ± 0.006) Termination L = Cu/Ni/Sn (RoHS Compliant) Electrical Schematic 8.89 (0.350) 1:1 1 TD+ TYP. 7.10 TYP. (0.280) TYP. 0.76 (0.030) CT 2 TD- 3 15 CT 10.50 TYP. (0.413) 14 TX1.27 TYP. (0.05) RD+ 6 DIMENSIONS: 16 TX+ 1:1 11 RX+ MM (INCHES) CT 7 10 CT RD- 8 9 *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. RX-  SM13072APEL - 10/100 Base-T Transformer Solder Profile tp TP CRITICAL ZONE T L TO TP RAMP-UP Ramp-up rate = 3 °C/sec. max. Ramp-down rate = 6 °C/sec. max. TL = 217 °C tL = 60-150 sec. Tp = 250 °C ±3 °C Time within 5 °C of actual Peak Temp (tp) = 20~40 sec. Ts min = 150 °C Ts max = 200 °C Ts min to Ts max = 60-180 sec. 25 °C to Peak Temperature = 8 min. max. TL Temperature tL TS MAX. RAMP-DOWN TS MIN. ts PREHEAT 25 8 MINS./248.9 °C t 25 °C TO PEAK Time Packaging Specifications 30.5 MAX. (1.201) DIA. 21.0 ± 0.8 (.827 ± .031) 2.5 ± 0.2 (.098 ± .008) 330.0 ± 2.0 (12.992 ± .079) DIA. 13.0 +0.5/-0.2 (.512 +.020/-.008) 24.00 (.945) 11.50 (.453) END 100.0 (3.937) MIN. DIA. 24.5 ± 0.2 (.965 ± .008) DIA. 1.50 (.059) 2.00 (.079) NO COMPONENT 25 PCS. MIN. 1.75 (.069) 0.40 (.016) START SM13072APL SM13072APL 11.42 (.450) 4.00 (.157) 1.50 (.059) DIA. 16.00 (.630) COMPONENTS 8 ° USER DIRECTION OF FEED 6.52 (.257) NO COMPONENT 23 PCS. MIN. DIMENSIONS: MM (INCHES) TOLERANCES: 0.10 (0.004) 600 PCS. PER REEL 02/17 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Bourns: SM13072APEL