ADS5440MPFPEP

ADS5440-EP www.ti.com SGLS359 – AUGUST 2006 13-BIT 210-MSPS ANALOG-TO-DIGITAL CONVERTER FEATURES • • • • • • • • • • • • • • • • • Controlled Baseline – One Assembly – One Test Site – One Fabrication Site Extended Temperature Performance of –55°C to 125°C Enhanced Diminishing Manufacturing Sources (DMS) Support Enhanced Product-Change Notification Qualification Pedigree(1) 13-Bit Resolution 210-MSPS Sample Rate SNR = 69 dBc at 100-MHz IF and 210 MSPS SFDR = 76 dBc at 100-MHz IF and 210 MSPS SNR = 68.1 dBc at 230-MHz IF and 210 MSPS SFDR = 74 dBc at 230-MHz IF and 210 MSPS 2.2-VPP Differential Input Voltage Fully Buffered Analog Inputs 5-V Analog Supply Voltage LVDS Compatible Outputs Total Power Dissipation: 2 W Offset Binary Output Format • • • TQFP-80 PowerPAD™ Package Pin Compatible With the ADS5444 Military Temperature Range = –55°C to 125°C (1) Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits. APPLICATIONS • • • • • Test and Measurement Software-Defined Radio Multichannel Base Station Receivers Base Station Tx Digital Predistortion Communications Instrumentation RELATED PRODUCTS • • • ADS5424 - 14-Bit, 105-MSPS ADC ADS5423 - 14-Bit, 80-MSPS ADC ADS5444 - 13-Bit, 250-MSPS ADC DESCRIPTION The ADS5440 is a 13-bit 210-MSPS analog-to-digital converter (ADC) that operates from a 5-V supply, while providing LVDS-compatible digital outputs from a 3.3-V supply. The ADS5440 input buffer isolates the internal switching of the onboard track and hold (T&H) from disturbing the signal source. An internal reference generator is also provided to further simplify the system design. The ADS5440 has outstanding low noise and linearity over input frequency. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PowerPAD is a trademark of Texas Instruments. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2006, Texas Instruments Incorporated ADS5440-EP www.ti.com SGLS359 – AUGUST 2006 AVDD AIN AIN A1 TH1 + TH2 Σ A2 + TH3 ADC1 Reference A3 ADC3 − − VREF Σ DVDD DAC1 ADC2 5 DAC2 5 5 Digital Error Correction CLK CLK Timing OVR OVR DRY DRY D[12:0] GND B0061-01 The ADS5440 is available in an 80-pin TQFP PowerPAD™ package. The ADS5440 is built on a state-of-the-art Texas Instruments complementary bipolar process (BiCom3X) and is specified over the full military temperature range (–55°C to 125°C). 2 Submit Documentation Feedback ADS5440-EP www.ti.com SGLS359 – AUGUST 2006 This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. PACKAGING/ORDERING INFORMATION (1) Product Package Lead HTQFP-80 (2) PowerPAD ADS5440 (1) (2) Package Designator Specified Temperature Range Package Marking –55°C to 125°C ADS5440M-EP (1) PFP Ordering Number Transport Media, Quantity ADS5440MPFPEP Tray, 96 For the most current product and ordering information, see the Package Option Addendum located at the end of this data sheet. Thermal pad size: 7,5 mm x 7,5 mm (typ) ABSOLUTE MAXIMUM RATINGS over operating free-air temperature range (unless otherwise noted) (1) VALUE/UNIT AVDD to GND Supply voltage 6V DRVDD to GND 5V Analog input to GND –0.3 V to AVDD + 0.3 V Clock input to GND –0.3 V to AVDD + 0.3 V ±2.5 V CLK to CLK Digital data output to GND –0.3 V to DRVDD + 0.3 V Operating temperature range –55°C to 125°C Maximum junction temperature 150°C Storage temperature range –65°C to 150°C ESD Human Body Model (HBM) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only and functional operation of the device at these or any other conditions beyond those specified is not implied. 1000 Years Estimated Life (1) 2.5 kV 100 Wirebond Voiding Fail Mode 10 Electromigration Fail Mode 1 0.1 120 130 140 150 160 170 180 Continuous TJ − 5C Figure 1. ADS5440MPFPEP Operating Life Derating Chart Submit Documentation Feedback 3 ADS5440-EP www.ti.com SGLS359 – AUGUST 2006 THERMAL CHARACTERISTICS (1) PARAMETER θJA TYP Soldered slug, no airflow 21.7 Soldered slug, 250-LFPM airflow 15.4 Unsoldered slug, no airflow θJC (1) TEST CONDITIONS UNIT °C/W 50 Unsoldered slug, 250-LFPM airflow 43.4 Bottom of package (heatslug) 2.99 °C/W Using 36 thermal vias (6 x 6 array). See the Section 2. RECOMMENDED OPERATING CONDITIONS MIN NOM MAX UNIT 4.75 5 5.25 V 3 3.3 3.6 V SUPPLIES AVDD Analog supply voltage DRVDD Output driver supply voltage ANALOG INPUT VCM Differential input range 2.2 VPP Input common mode 2.4 V CLOCK INPUT 1/tC ADCLK input sample rate (sine wave) 10 210 Clock amplitude, differential sine wave Clock duty cycle TA MSPS 3 VPP 50% Open free air-temperature –55 °C 125 ELECTRICAL CHARACTERISTICS Min, Typ, and Max values at TA = 25°C, full temperature range is TMIN = –55°C to TMAX = 125°C, sampling rate = 210 MSPS, 50% clock duty cycle, AVDD = 5 V, DRVDD = 3.3 V, –1-dBFS differential input, and 3-VPP differential clock (unless otherwise noted) PARAMETER TEST CONDITIONS MIN Resolution TYP MAX UNIT 13 Bits 2.2 Vpp 1 kΩ ANALOG INPUTS Differential input range Differential input resistance (DC) Differential input capacitance 1.5 pF Analog input bandwidth 800 MHz 2.4 V INTERNAL REFERENCE VOLTAGE VREF Reference voltage DYNAMIC ACCURACY No missing codes DNL INL Differential linearity error Integral linearity error Assured –1 ±0.4 1 TA = 25°C –2.2 ± 0.9 2.2 Full temp range –3.2 ±0.9 3.2 fIN = 10 MHz fIN = 10 MHz Offset error –11 Offset temperature coefficient Gain error –5 Gain temperature coefficient PSRR 4 11 0.0005 fIN = 100 MHz Submit Documentation Feedback LSB LSB mV mV/°C 5 %FS –0.02 ∆%/°C 1 mV/V ADS5440-EP www.ti.com SGLS359 – AUGUST 2006 ELECTRICAL CHARACTERISTICS (continued) Min, Typ, and Max values at TA = 25°C, full temperature range is TMIN = –55°C to TMAX = 125°C, sampling rate = 210 MSPS, 50% clock duty cycle, AVDD = 5 V, DRVDD = 3.3 V, –1-dBFS differential input, and 3-VPP differential clock (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT 340 410 mA 80 100 mA 2 2.35 W POWER SUPPLY IAVDD Analog supply current IDRVDD Output buffer supply current VIN = full scale, fIN = 100 MHz, FS = 210 MSPS Power dissipation DYNAMIC AC CHARACTERISTICS fIN = 10 MHz 69.8 fIN = 70 MHz fIN = 100 MHz SNR Signal-to-noise ratio 69.2 TA = 25°C Full temp range 67.5 66 fIN = 170 MHz fIN = 230 MHz 68 fIN = 300 MHz 66.9 fIN = 400 MHz 65 fIN = 10 MHz 84 fIN = 100 MHz HD2 HD3 Spurious free dynamic range Second harmonic Third harmonic Worst other harmonic/spur (other than HD2 and HD3) 69 68.3 fIN = 70 MHz SFDR 69 dBc 77 TA = 25°C Full temp range 70 76 64.5 76 fIN = 170 MHz 74 fIN = 230 MHz 74 fIN = 300 MHz 69 fIN = 400 MHz 64 fIN = 10 MHz 96 fIN = 70 MHz 83 fIN = 100 MHz 87 fIN = 170 MHz 76 fIN = 230 MHz 76 fIN = 300 MHz 69 fIN = 400 MHz 64 fIN = 10 MHz 84 fIN = 70 MHz 77 fIN = 100 MHz 76 fIN = 170 MHz 74 fIN = 230 MHz 74 fIN = 300 MHz 73 fIN = 400 MHz 70 fIN = 10 MHz 92 fIN = 70 MHz 92 fIN = 100 MHz 87 fIN = 170 MHz 87 fIN = 230 MHz 83 fIN = 300 MHz 83 fIN = 400 MHz 80 Submit Documentation Feedback dBc dBc dBc dBc 5 ADS5440-EP www.ti.com SGLS359 – AUGUST 2006 ELECTRICAL CHARACTERISTICS (continued) Min, Typ, and Max values at TA = 25°C, full temperature range is TMIN = –55°C to TMAX = 125°C, sampling rate = 210 MSPS, 50% clock duty cycle, AVDD = 5 V, DRVDD = 3.3 V, –1-dBFS differential input, and 3-VPP differential clock (unless otherwise noted) PARAMETER SINAD TEST CONDITIONS MIN fIN = 10 MHz 69.6 fIN = 70 MHz 68.8 fIN = 100 MHz 68 fIN = 170 MHz 66.8 fIN = 230 MHz 66 fIN = 300 MHz 64 fIN = 400 MHz ENOB TYP Effective number of bits fIN = 10 MHz RMS idle channel noise Inputs tied to common-mode MAX UNIT dBc 60 11.4 Bits 0.4 LSB DIGITAL CHARACTERISTICS – LVDS DIGITAL OUTPUTS 6 Differential output voltage 0.247 Output offset voltage 1.125 Submit Documentation Feedback 1.25 0.452 V 1.375 V ADS5440-EP www.ti.com SGLS359 – AUGUST 2006 TIMING CHARACTERISTICS tA N+3 N AIN N+1 N+2 tCLK CLK, CLK tCLKH N+1 N N+4 tCLKL N+2 N+3 N+4 tC_DR D[12:0], OVR, OVR N−3 tr N−2 tf tsu_c N−1 th_c N th_DR tsu_DR DRY, DRY tDR T0073-01 Figure 2. Timing Diagram TIMING CHARACTERISTICS Min, Typ, Max over full temperature range, 50% clock duty cycle, sampling rate = 210 MSPS, AVDD = 5 V, DRVDD = 3.3 V PARAMETER TEST CONDITIONS MIN TYP MAX UNIT tA Aperture delay 500 ps tJ Clock slope independent aperture uncertainty (jitter) 150 fs RMS 4 cycles Latency Clock Input tCLK Clock period 4.76 ns tCLKH Clock pulse width high 2.38 ns tCLKL Clock pulse width low 2.38 ns Clock to DataReady (DRY) tDR Clock rising to DataReady falling tC_DR Clock rising to DataReady rising 1.1 Clock duty cycle = 50% (1) 3.1 3.5 ns 3.9 ns Clock to DATA, OVR (2) tr Data rise time (20% to 80%) 0.6 ns tf Data fall time(80% to 20%) 0.6 ns tsu_c Data valid to clock (setup time) 3.5 ns th_c Clock to invalid Data (hold time) 0.2 ns DataReady (DRY)/DATA, OVR (2) tsu(DR) Data valid to DRY 2.1 2.4 ns th(DR) DRY to invalid Data 0.9 1.3 ns (1) (2) tC_DR = tDR + tCLKH for clock duty cycles other than 50% Data is updated with clock falling edge or DRY rising edge. Submit Documentation Feedback 7 D5 D5 D6 D6 GND DVDD D7 D7 D8 D8 D9 D9 D10 D10 D11 D11 D12 D12 DRY DRY GND 21 7 8 9 10 11 12 13 14 15 16 17 18 19 20 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 6 39 4 5 61 1 2 3 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 GND AVDD GND AVDD GND AVDD GND NC GND AVDD GND NC GND AVDD GND AVDD GND AVDD GND AVDD Submit Documentation Feedback 8 D4 D4 D3 D3 D2 D2 D1 D1 GND DVDD D0 D0 NC NC NC NC NC NC OVR OVR DVDD GND AVDD NC NC VREF GND AVDD GND CLK CLK GND AVDD AVDD GND AIN AIN GND AVDD GND www.ti.com ADS5440-EP SGLS359 – AUGUST 2006 DEVICE INFORMATION PFP PACKAGE (TOP VIEW) P0027-01 ADS5440-EP www.ti.com SGLS359 – AUGUST 2006 DEVICE INFORMATION (continued) TERMINAL FUNCTIONS TERMINAL NAME DESCRIPTION NO. 3, 8, 13, 14, 19, 21, 23, 25, 27, 31, 35, 37, Analog power supply 39 AVDD DVDD 1, 51, 66 Output driver power supply 2, 7, 9, 12, 15, 18, 20, 22, 24, 26, 28, 30, 32, Ground 34, 36, 38, 40, 52, 65 GND VREF 6 Reference voltage CLK 10 Differential input clock (positive). Conversion initiated on rising edge. CLK 11 Differential input clock (negative) AIN 16 Differential input signal (positive) AIN 17 Differential input signal (negative) OVR, OVR 42, 41 Over range indicator LVDS output. A logic high signals an analog input in excess of the full-scale range. D0, D0 50, 49 LVDS digital output pair, least-significant bit (LSB) D1–D6, D1–D6 53–64 LVDS digital output pairs D7–D11, D7–D11 67–76 LVDS digital output pairs D12, D12 78, 77 LVDS digital output pair, most-significant bit (MSB) DRY, DRY 80, 79 Data ready LVDS output pair NC 4, 5, 29, 33, 43–48 No connect DEFINITION OF SPECIFICATIONS Analog Bandwidth The analog input frequency at which the power of the fundamental is reduced by 3 dB with respect to the low frequency value. Aperture Delay The delay in time between the rising edge of the input sampling clock and the actual time at which the sampling occurs. Aperture Uncertainty (Jitter) The sample-to-sample variation in aperture delay. Clock Pulse Width/Duty Cycle The duty cycle of a clock signal is the ratio of the time the clock signal remains at a logic high (clock pulse width) to the period of the clock signal. Duty cycle is typically expressed as a percentage. A perfect differential sine wave clock results in a 50% duty cycle. Maximum Conversion Rate The maximum sampling rate at which certified operation is given. All parametric testing is performed at this sampling rate unless otherwise noted. Minimum Conversion Rate The minimum sampling rate at which the ADC functions. Differential Nonlinearity (DNL) An ideal ADC exhibits code transitions at analog input values spaced exactly 1 LSB apart. The DNL is the deviation of any single step from this ideal value, measured in units of LSB. Integral Nonlinearity (INL) The INL is the deviation of the ADCs transfer function from a best fit line determined by a least squares curve fit of that transfer function. The INL at each analog input value is the difference between the actual transfer function and this best fit line, measured in units of LSB. Gain Error The gain error is the deviation of the ADCs actual input full-scale range from its ideal value. The gain error is given as a percentage of the ideal input full-scale range. Offset Error Offset error is the deviation of output code from mid-code when both inputs are tied to common-mode. Temperature Drift Temperature drift (with respect to gain error and offset error) specifies the change from the value at the nominal temperature to the value at TMIN or TMAX. It is computed as the maximum variation the parameters over the whole temperature range divided by TMIN – TMAX. Signal-to-Noise Ratio (SNR) SNR is the ratio of the power of the fundamental (PS) to the noise floor power (PN), excluding the power at dc and the first five harmonics. Submit Documentation Feedback 9 ADS5440-EP www.ti.com SGLS359 – AUGUST 2006 DEFINITION OF SPECIFICATIONS (continued) SNR + 10log P S 10 P N (1) SNR is either given in units of dBc (dB to carrier) when the absolute power of the fundamental is used as the reference, or dBFS (dB to full scale) when the power of the fundamental is extrapolated to the converter’s full-scale range. Signal-to-Noise and Distortion (SINAD) SINAD is the ratio of the power of the fundamental (PS) to the power of all the other spectral components including noise (PN) and distortion (PD), but excluding dc. P SINAD + 10log S 10 P ) P N D (2) SINAD is either given in units of dBc (dB to carrier) when the absolute power of the fundamental is used as the reference, or dBFS (dB to full scale) when the power of the fundamental is extrapolated to the converter’s full-scale range. Effective Resolution Bandwidth The highest input frequency where the SNR (dB) is dropped by 3 dB for a full-scale input amplitude. Total Harmonic Distortion (THD) THD is the ratio of the power of the fundamental (PS) to the power of the first five harmonics (PD). P THD + 10log 10 P S D (3) THD is typically given in units of dBc (dB to carrier). Two-Tone Intermodulation Distortion IMD3 is the ratio of the power of the fundamental (at frequencies f1, f2) to the power of the worst spectral component at either frequency 2f1– f2 or 2f2– f1). IMD3 is either given in units of dBc (dB to carrier) when the absolute power of the fundamental is used as the reference or dBFS (dB to full scale) when the power of the fundamental is extrapolated to the converter’s full-scale range. 10 Submit Documentation Feedback ADS5440-EP www.ti.com SGLS359 – AUGUST 2006 TYPICAL CHARACTERISTICS Spectral Performance (FFT For 10-MHz Input Signal) Spectral Performance (FFT For 100-MHz Input Signal) 0 0 SFDR = 83 dBc SNR = 69.9 dBc THD = 81.4 dBc SINAD = 69.6 dBc −20 −40 Amplitude − dB Amplitude − dB −20 SFDR = 76 dBc SNR = 69 dBc THD = 74.8 dBc SINAD = 67.9 dBc −60 −80 −100 −40 −60 −80 −100 −120 −120 0 10 20 30 40 50 60 70 80 90 100 0 10 20 f − Frequency − MHz 30 40 50 60 70 80 90 100 f − Frequency − MHz G001 G002 Figure 3. Figure 4. Spectral Performance (FFT For 170-MHz Input Signal) Spectral Performance (FFT For 230-MHz Input Signal) 0 0 SFDR = 74 dBc SNR = 68.3 dBc THD = 71.5 dBc SINAD = 66.8 dBc −20 −40 Amplitude − dB Amplitude − dB −20 SFDR = 74 dBc SNR = 67.9 dBc THD = 70.3 dBc SINAD = 65.9 dBc −60 −80 −100 −40 −60 −80 −100 −120 −120 0 10 20 30 40 50 60 70 80 90 100 0 10 f − Frequency − MHz 20 30 40 50 60 70 80 90 100 f − Frequency − MHz G003 Figure 5. G004 Figure 6. Submit Documentation Feedback 11 ADS5440-EP www.ti.com SGLS359 – AUGUST 2006 TYPICAL CHARACTERISTICS (continued) Spectral Performance (FFT For 300-MHz Input Signal) Spectral Performance (FFT For 400-MHz Input Signal) 0 0 SFDR = 69 dBc SNR = 66.9 dBc THD = 67.1 dBc SINAD = 63.9 dBc −20 −40 Amplitude − dB Amplitude − dB −20 SFDR = 63.3 dBc SNR = 64.9 dBc THD = 62.1 dBc SINAD = 60.1 dBc −60 −80 −100 −40 −60 −80 −100 −120 −120 0 10 20 30 40 50 60 70 80 90 100 0 10 20 f − Frequency − MHz 30 40 50 60 70 80 90 100 f − Frequency − MHz G005 G006 Figure 7. Figure 8. Two-Tone Intermodulation Distortion (FFT For 51.5-MHz and 52.5 MHz Input Signals) Two-Tone Intermodulation Distortion (FFT For 51.5-MHz and 52.5 MHz Input Signals) 0 0 FIN1 = 51.5 MHz, −7 dBFS FIN2 = 52.5 MHz, −7 dBFS IMD3 = 89.3 dBFS −20 −40 Amplitude − dB Amplitude − dB −20 FIN1 = 51.5 MHz, −16 dBFS FIN2 = 52.5 MHz, −16 dBFS IMD3 = 97.4 dBFS −60 −80 −100 −40 −60 −80 −100 −120 −120 0 10 20 30 40 50 60 70 80 90 100 0 10 f − Frequency − MHz 20 30 40 50 60 G007 Figure 9. 12 70 80 90 100 f − Frequency − MHz G008 Figure 10. Submit Documentation Feedback ADS5440-EP www.ti.com SGLS359 – AUGUST 2006 TYPICAL CHARACTERISTICS (continued) Two-Tone Intermodulation Distortion (FFT For 151-MHz and 152 MHz Input Signals) Two-Tone Intermodulation Distortion (FFT For 151-MHz and 152 MHz Input Signals) 0 0 FIN1 = 151 MHz, −7 dBFS FIN2 = 152 MHz, −7 dBFS IMD3 = 87.9 dBFS −20 −40 Amplitude − dB Amplitude − dB −20 FIN1 = 151 MHz, −16 dBFS FIN2 = 152 MHz, −16 dBFS IMD3 = 99.4 dBFS −60 −80 −100 −40 −60 −80 −100 −120 −120 0 10 20 30 40 50 60 70 80 90 100 0 10 20 f − Frequency − MHz 30 40 50 60 70 80 90 100 f − Frequency − MHz G009 G010 Figure 11. Figure 12. Two-Tone Intermodulation Distortion (FFT For 254-MHz and 255 MHz Input Signals) Two-Tone Intermodulation Distortion (FFT For 254-MHz and 255 MHz Input Signals) 0 0 FIN1 = 254 MHz, −7 dBFS FIN2 = 255 MHz, −7 dBFS IMD3 = 80.5 dBFS −20 −40 Amplitude − dB Amplitude − dB −20 FIN1 = 254 MHz, −16 dBFS FIN2 = 255 MHz, −16 dBFS IMD3 = 93.9 dBFS −60 −80 −100 −40 −60 −80 −100 −120 −120 0 10 20 30 40 50 60 70 80 90 100 0 10 f − Frequency − MHz 20 30 40 50 60 70 80 90 100 f − Frequency − MHz G011 Figure 13. G012 Figure 14. Submit Documentation Feedback 13 ADS5440-EP www.ti.com SGLS359 – AUGUST 2006 TYPICAL CHARACTERISTICS (continued) Two-Tone Intermodulation Distortion (FFT For 355-MHz and 356 MHz Input Signals) Two-Tone Intermodulation Distortion (FFT For 355-MHz and 356 MHz Input Signals) 0 0 FIN1 = 355 MHz, −7 dBFS FIN2 = 356 MHz, −7 dBFS IMD3 = 79.7 dBFS −20 −40 Amplitude − dB Amplitude − dB −20 FIN1 = 355 MHz, −16 dBFS FIN2 = 356 MHz, −16 dBFS IMD3 = 96.8 dBFS −60 −80 −100 −40 −60 −80 −100 −120 −120 0 10 20 30 40 50 60 70 80 90 100 0 10 20 f − Frequency − MHz 30 40 50 60 70 80 90 100 f − Frequency − MHz G013 G014 Figure 15. Figure 16. WCDMA Carrier (fIN = 70 MHz) WCDMA Carrier (fIN = 140 MHz) 0 0 fS = 184.32 MSPS fIN = 70 MHz ACPR Adj Top = 73 dB ACPR Adj Low = 72.7 dB −20 −20 −40 Amplitude − dB −40 Amplitude − dB fS = 184.32 MSPS fIN = 140 MHz ACPR Adj Top = 72.1 dB ACPR Adj Low = 72.1 dB −60 −80 −60 −80 −100 −100 −120 −120 −140 −140 0 10 20 30 40 50 60 70 80 90 0 f − Frequency − MHz 10 20 30 40 50 G015 Figure 17. 14 60 70 80 90 f − Frequency − MHz G016 Figure 18. Submit Documentation Feedback ADS5440-EP www.ti.com SGLS359 – AUGUST 2006 TYPICAL CHARACTERISTICS (continued) Input Bandwidth Differential Nonlinearity 0.4 0 −1 Differential Nonlinearity − LSB −2 Input Amplitude − dB fS = 210 MSPS fIN = 10 MHz 0.3 −3 −4 −5 −6 −7 −8 −9 1 0.1 0.0 −0.1 −0.2 −0.3 fS = 210 MSPS AIN = −1 dBFS −10 0.2 −0.4 10 100 fIN − Input Frequency − MHz 0 1k 1024 2048 3072 4096 5120 6144 7168 8192 Code G017 G018 Figure 19. Figure 20. Noise Histogram With Inputs Shorted 45 0.8 40 0.6 35 0.4 Percentage − % INL − Integral Nonlinearity − LSB Integral Nonlinearity 1.0 0.2 0.0 −0.2 −0.4 30 25 20 15 10 −0.6 −0.8 5 fS = 210 MSPS fIN = 10 MHz −1.0 0 0 1024 2048 3072 4096 5120 6144 7168 8192 4101 Code G019 Figure 21. 4102 4103 4104 4105 4106 Code Number G020 Figure 22. Submit Documentation Feedback 15 ADS5440-EP www.ti.com SGLS359 – AUGUST 2006 TYPICAL CHARACTERISTICS (continued) AC Performance vs Input Amplitude AC Performance vs Input Amplitude 100 100 SFDR (dBFS) 80 SNR (dBFS) 60 40 Performance − dB Performance − dB 80 SFDR (dBFS) SFDR (dBc) 20 SNR (dBFS) 60 SFDR (dBc) 40 20 SNR (dBc) SNR (dBc) 0 0 fS = 210 MSPS fIN = 100 MHz −20 −100 −90 −80 −70 −60 −50 −40 −30 −20 −10 fS = 210 MSPS fIN = 230 MHz −20 −100 −90 −80 −70 −60 −50 −40 −30 −20 −10 0 Input Amplitude − dBFS G021 G022 Figure 23. Figure 24. Two-Tone Spurious Free Dynamic Range vs Input Amplitude Spurious Free Dynamic Range vs Clock Duty Cycle 80.0 SFDR − Spurious-Free Dynamic Range − dBc SFDR − Spurious-Free Dynamic Range − dB 120 SFDR (dBFS) 100 80 60 SFDR (dBc) 40 20 90 dBFS Line fS = 210 MSPS f1 = 151 MHz f2 = 152 MHz 0 −20 −110−100 −90 −80 −70 −60 −50 −40 −30 −20 −10 fS = 210 MSPS Square Wave 77.5 75.0 fIN = 100.33 MHz 72.5 fIN = 230.13 MHz 70.0 67.5 65.0 62.5 60.0 40 0 Input Amplitude − dBFS 45 50 55 60 Duty Cycle − % G023 Figure 25. 16 0 Input Amplitude − dBFS G024 Figure 26. Submit Documentation Feedback ADS5440-EP www.ti.com SGLS359 – AUGUST 2006 TYPICAL CHARACTERISTICS (continued) Spurious Free Dynamic Range vs Clock Level Signal-to-Noise Ratio vs Clock Level 70 fS = 210 MSPS fIN = 100.33 MHz 76 69 SNR − Signal-to-Noise Ratio − dBc SFDR − Spurious-Free Dynamic Range − dBc 78 74 72 fIN = 230.13 MHz 70 68 66 64 62 68 67 fIN = 230.13 MHz 66 65 64 63 62 61 60 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 60 0.0 4.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Clock Amplitude − VP−P Clock Amplitude − VP−P Figure 27. Figure 28. Performance vs Clock Common Mode Level Spurious Free Dynamic Range vs AVDD Across Temperature 4.0 G026 G025 84 SFDR − Spurious-Free Dynamic Range − dBc 80 SFDR 70 SNR 60 Performance − dBc fIN = 100.33 MHz fS = 210 MSPS 50 40 30 fs = 210 MSPS fin = 100 MHz 20 10 0 1 2 3 4 82 fS = 210 MSPS fIN = 100 MHz 80 78 76 TA = 25°C TA = 0°C 74 TA = 85°C 72 TA = −40°C 70 4.65 5 TA = 65°C Clock Common-Mode Voltage − V G027 Figure 29. 4.75 4.85 4.95 5.05 5.15 AVDD − Supply Voltage − V 5.25 5.35 G028 Figure 30. Submit Documentation Feedback 17 ADS5440-EP www.ti.com SGLS359 – AUGUST 2006 TYPICAL CHARACTERISTICS (continued) Signal-to-Noise Ratio vs AVDD Across Temperature Spurious Free Dynamic Range vs DRVDD Across Temperature 70 80 69 68 SFDR − Spurious-Free Dynamic Range − dBc SNR − Signal-to-Noise Ratio − dBc TA = 0°C TA = 65°C TA = −40°C TA = 85°C TA = 25°C 67 66 fS = 210 MSPS fIN = 100 MHz 65 4.70 4.80 4.90 5.00 5.10 5.20 TA = 65°C 78 TA = 25°C 77 76 TA = 0°C 75 74 TA = 85°C 73 TA = −40°C 72 71 70 2.9 5.30 AVDD − Supply Voltage − V fS = 210 MSPS fIN = 100 MHz 79 3.1 3.3 G029 Figure 31. Figure 32. Signal-to-Noise Ratio vs DRVDD Across Temperature 70 SNR − Signal-to-Noise Ratio − dBc TA = 0°C 69 TA = 65°C TA = 85°C 68 TA = −40°C TA = 25°C 67 66 fS = 210 MSPS fIN = 100 MHz 65 3.0 3.1 3.2 3.3 3.4 3.5 DRVDD − Supply Voltage − V Figure 33. 18 3.5 DRVDD − Supply Voltage − V Submit Documentation Feedback 3.6 3.7 G031 3.7 G030 ADS5440-EP www.ti.com SGLS359 – AUGUST 2006 TYPICAL CHARACTERISTICS (continued) SNR vs Input Frequency and Sampling Frequency 240 69 220 68 fS − Sampling Frequency − MHz 200 65 66 180 160 67 140 68 69 69 65 120 66 67 100 80 66 60 67 40 68 20 10 10 65 68 69 67 66 50 65 66 65 63 100 62 150 64 62 61 60 63 64 200 64 63 62 250 60 59 58 300 61 58 350 59 57 56 400 fIN − Input Frequency − MHz 54 56 58 60 62 64 SNR − dBc 66 68 70 M0048−01 Figure 34. Submit Documentation Feedback 19 ADS5440-EP www.ti.com SGLS359 – AUGUST 2006 TYPICAL CHARACTERISTICS (continued) SFDR vs Input Frequency and Sampling Frequency 240 72 220 76 fS − Sampling Frequency − MHz 200 72 74 70 78 180 66 68 78 80 74 76 66 160 82 140 120 60 72 84 100 80 80 82 68 70 62 74 84 86 80 84 76 82 84 78 82 84 40 20 10 10 64 84 82 80 82 82 50 66 100 150 78 76 72 74 200 250 70 68 300 64 62 350 60 58 400 fIN − Input Frequency − MHz 55 60 65 70 SFDR − dBc Figure 35. 20 Submit Documentation Feedback 75 80 85 M0048−02 ADS5440-EP www.ti.com SGLS359 – AUGUST 2006 APPLICATION INFORMATION Theory of Operation The ADS5440 is a 13-bit, 210-MSPS, monolithic pipeline analog-to-digital converter (ADC). Its bipolar analog core operates from a 5-V supply, while the output uses a 3.3 V supply to provide LVDS compatible outputs. The conversion process is initiated by the rising edge of the external input clock. At that instant, the differential input signal is captured by the input track and hold (T&H) and the input sample is sequentially converted by a series of small resolution stages, with the outputs combined in a digital correction logic block. Both the rising and the falling clock edges are used to propagate the sample through the pipeline every half clock cycle. This process results in a data latency of four clock cycles, after which the output data is available as a 13-bit parallel word, coded in offset binary format. Input Configuration The analog input for the ADS5440 consists of an analog differential buffer followed by a bipolar T&H. The analog buffer isolates the source driving the input of the ADC from any internal switching. The input common mode is set internally through a 500-Ω resistor connected from 2.4 V to each of the inputs. This results in a differential input impedance of 1 kΩ. For a full-scale differential input, each of the differential lines of the input signal (pins 16 and 17) swings symmetrically between 2.4 + 0.55 V and 2.4 – 0.55 V. This means that each input has a maximum signal swing of 1.1 VPP for a total differential input signal swing of 2.2 VPP. The maximum swing is determined by the internal reference voltage generator eliminating the need for any external circuitry for this purpose. The ADS5440 obtains optimum performance when the analog inputs are driven differentially. The circuit in Figure 36 shows one possible configuration using an RF transformer with termination either on the primary or on the secondary of the transformer. If voltage gain is required, a step up transformer can be used. For voltage gains that would require an impractical transformer turn ratio, a single-ended amplifier driving the transformer is shown in Figure 37. R0 50 W Z0 50 W AIN 1:1 R 50 W AC S ignal Source ADS5440 AIN AD T 1−1W T Figure 36. Converting a Single-Ended Input to a Differential Signal Using RF Transformers 5V VIN −5 V RS 100 Ω + OPA695 − 0.1 µF 1000 µF RIN 1:1 RT 100 Ω RIN AIN CIN ADS5440 AIN R1 400 Ω R2 57.5 Ω AV = 8V/V (18 dB) Figure 37. Using the OPA695 With the ADS5440 Submit Documentation Feedback 21 ADS5440-EP www.ti.com SGLS359 – AUGUST 2006 Application Information (continued) From VIN 50 Ω Source 100 Ω 348 Ω 13-Bit 210 MSPS +5V 78.9 Ω 49.9 Ω 0.22 µF 18 pF 100 Ω 49.9 Ω THS4509 AIN ADS5440 AIN VREF CM 49.9 Ω 0.22 µF 78.9 Ω 49.9 Ω 0.22 µF 0.1 µF 0.1 µF 348 Ω Figure 38. Using the THS4509 With the ADS5440 Besides the OPA695, TI offers a wide selection of single-ended operational amplifiers that can be selected depending on the application. An RF gain block amplifier, such as the TI THS9001, can also be used with an RF transformer for high input frequency applications. For applications requiring dc-coupling with the signal source, a differential input/differential output amplifier like the THS4509 (see Figure 38) is a good solution, as it minimizes board space and reduces the number of components. In this configuration, the THS4509 amplifier circuit provides 10 dB of gain, converts the single-ended input to differential, and sets the proper input common-mode voltage to the ADS5440. The 50-Ω resistors and 18-pF capacitor between the THS4509 outputs and ADS5440 inputs (along with the input capacitance of the ADC) limit the bandwidth of the signal to about 70 MHz (–3 dB). Input termination is accomplished via the 78.9-Ω resistor and 0.22-µF capacitor to ground in conjunction with the input impedance of the amplifier circuit. A 0.22-µF capacitor and 49.9-Ω resistor is inserted to ground across the 78.9-Ω resistor and 0.22-µF capacitor on the alternate input to balance the circuit. Gain is a function of the source impedance, termination, and 348-Ω feedback resistor. See the THS4509 data sheet (SLOS454) for further component values to set proper 50-Ω termination for other common gains. Since the ADS5440 recommended input common-mode voltage is 2.4 V, the THS4509 is operated from a single power supply input with VS+ = 5 V and VS– = 0 V (ground). This maintains maximum headroom on the internal transistors of the THS4509. Clock Inputs The ADS5440 clock input can be driven with either a differential clock signal or a single-ended clock input, with little or no difference in performance between both configurations. In low input frequency applications, where jitter may not be a big concern, the use of single-ended clock (see Figure 39) could save some cost and board space without any trade-off in performance. When driven on this configuration, it is best to connect CLK to ground with a 0.01-µF capacitor, while CLK is ac-coupled with a 0.01 µF capacitor to the clock source, as shown in Figure 39. Square Wave or Sine Wave CLK 0.01 µF ADS5440 CLK 0.01 µF Figure 39. Single-Ended Clock 22 Submit Documentation Feedback ADS5440-EP www.ti.com SGLS359 – AUGUST 2006 Application Information (continued) 0.1 µF Clock Source 1:4 CLK MA3X71600LCT−ND ADS5440 CLK Figure 40. Differential Clock For jitter-sensitive applications, the use of a differential clock has some advantages (as with any other ADC) at the system level. The first advantage is that it allows for common-mode noise rejection at the PCB level. A differential clock also allows for the use of bigger clock amplitudes without exceeding the absolute maximum ratings. In the case of a sinusoidal clock, this results in higher slew rates and reduces the impact of clock noise on jitter. See Clocking High Speed Data Converters (SLYT075) for more detail. Figure 40 shows this approach. The back-to-back Schottky diodes can be added to limit the clock amplitude in cases where this would exceed the absolute maximum ratings, even when using a differential clock. 100 nF MC100EP16DT 100 nF D D CLK Q VBB Q 499 W 100 nF 100 nF ADS5440 CLK 499 W 50 Ω 50 Ω 100 nF 113 Ω Figure 41. Differential Clock Using PECL Logic Another possibility is the use of a logic based clock, such as PECL. In this case, the slew rate of the edges will most likely be much higher than the one obtained for the same clock amplitude based on a sinusoidal clock. This solution would minimize the effect of the slope dependent ADC jitter. Using logic gates to square a sinusoidal clock may not produce the best results as logic gates may not have been optimized to act as comparators, adding too much jitter while squaring the inputs. The common-mode voltage of the clock inputs is set internally to 2.4 V using internal 1-kΩ resistors. It is recommended to use ac coupling, but if this scheme is not possible due to, for instance, asynchronous clocking, the ADS5440 features good tolerance to clock common-mode variation. Additionally, the internal ADC core uses both edges of the clock for the conversion process. Ideally, a 50% duty cycle clock signal should be provided. Digital Outputs The ADC provides 13 data outputs (D12 to D0, with D12 being the MSB and D0 the LSB), a data-ready signal (DRY), and an over-range indicator (OVR) that equals a logic high when the output reaches the full-scale limits. The output format is offset binary. It is recommended to use the DRY signal to capture the output data of the ADS5440. The ADS5440 digital outputs are LVDS compatible. Submit Documentation Feedback 23 ADS5440-EP www.ti.com SGLS359 – AUGUST 2006 Application Information (continued) Power Supplies The use of low noise power supplies with adequate decoupling is recommended. Linear supplies are the preferred choice versus switched ones, which tend to generate more noise components that can be coupled to the ADS5440. The ADS5440 uses two power supplies. For the analog portion of the design, a 5-V AVDD is used, while for the digital outputs supply (DRVDD) we recommend the use of 3.3 V. All the ground pins are marked as GND, although AGND pins and DRGND pins are not tied together inside the package. Layout Information The evaluation board represents a good guideline of how to layout the board to obtain the maximum performance out of the ADS5440. General design rules as the use of multilayer boards, single ground plane for ADC ground connections and local decoupling ceramic chip capacitors should be applied. The input traces should be isolated from any external source of interference or noise including the digital outputs, as well as the clock traces. The clock signal traces should also be isolated from other signals, especially in applications where low jitter is required as high IF sampling. Besides performance oriented rules, care has to be taken when considering the heat dissipation out of the device. The thermal heatsink should be soldered to the board as described in the PowerPad Package section. PowerPAD™ Package The PowerPAD package is a thermally-enhanced standard size IC package designed to eliminate the use of bulky heatsinks and slugs traditionally used in thermal packages. This package can be easily mounted using standard printed circuit board (PCB) assembly techniques, and can be removed and replaced using standard repair procedures. The PowerPAD package is designed so that the leadframe die pad (or thermal pad) is exposed on the bottom of the IC. This provides an extremely low thermal resistance path between the die and the exterior of the package. The thermal pad on the bottom of the IC can then be soldered directly to the PCB using the PCB as a heatsink. Assembly Process 1. Prepare the PCB top-side etch pattern including etch for the leads, as well as the thermal pad as illustrated in the Mechanical Data section. 2. Place a 6-by-6 array of thermal vias in the thermal pad area. These holes should be 13 mils in diameter. The small size prevents wicking of the solder through the holes. 3. It is recommended to place a small number of 25-mil diameter holes under the package, but outside the thermal pad area to provide an additional heat path. 4. Connect all holes (both those inside and outside the thermal pad area) to an internal copper plane (such as a ground plane). 5. Do not use the typical web or spoke via connection pattern when connecting the thermal vias to the ground plane. The spoke pattern increases the thermal resistance to the ground plane. 6. The top-side solder mask should leave exposed the terminals of the package and the thermal pad area. 7. Cover the entire bottom side of the PowerPAD vias to prevent solder wicking. 8. Apply solder paste to the exposed thermal pad area and all of the package terminals. For more detailed information regarding the PowerPAD package and its thermal properties, see either the SLMA004 application brief, PowerPAD Made Easy, or the technical brief, PowerPAD Thermally Enhanced Package SLMA002. 24 Submit Documentation Feedback PACKAGE OPTION ADDENDUM www.ti.com 10-Dec-2020 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) (3) Device Marking (4/5) (6) ADS5440MPFPEP ACTIVE HTQFP PFP 80 96 RoHS & Green NIPDAU Level-3-260C-168 HR -55 to 125 ADS5440M-EP V62/06669-01XE ACTIVE HTQFP PFP 80 96 RoHS & Green NIPDAU Level-3-260C-168 HR -55 to 125 ADS5440M-EP (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of