DCP010505B, DCP010512B, DCP010515B, DCP012405B, DCP010505DB, DCP010507DB
DCP010505B,
DCP010512B,
DCP010515B,DCP011512DB,
DCP012405B, DCP010505DB,
DCP010512DB,
DCP010515DB,
DCP011515DB, DCP010507DB
DCP012415DB
DCP010512DB, DCP010515DB,
DCP011512DB,
DCP011515DB,
ZHCSJP7I
– DECEMBER
2000 – REVISED DCP012415DB
SEPTEMBER 2020
www.ti.com.cn
ZHCSJP7I – DECEMBER 2000 – REVISED SEPTEMBER 2020
DCP01 系列 1W、1000VRMS 隔离式非稳压直流/直流转换器模块
1 特性
•
•
•
•
•
•
•
•
•
•
•
3 说明
1kV 隔离(工作):1 秒测试
在隔离层中施加连续电压:60VDC/42.5VAC
UL1950 认证组件
EN55022 B 类 EMC 性能
7 引脚 PDIP 和 7 引脚 SOP 封装
输入电压:5V、15V 或 24V
输出电压:±5V、±6.5V、±12V 或 ±15V
器件间同步
过热保护
短路保护
高效率
DCP01B 系列是 1W 隔离式非稳压直流/直流转换器模
块。DCP01B 系列器件具有片上器件保护,只需要很
少的外部元件即可提供额外的功能,例如输出禁用和开
关频率同步。
DCP01B 系列器件集这些特性和较小的尺寸于一体,
非常适合用于各种应用,并且对需要信号路径隔离的应
用来说,它是一个易于使用的解决方案。
警告:此产品具有运行隔离功能,仅可用于信号隔离。不可作为需
要增强型隔离的安全隔离电路的一部分使用。请参阅特性说明 中的
定义。
器件信息
2 应用
•
•
•
•
•
封装(1)
器件型号
PDIP (7)
DCP01xxxxB
信号路径隔离
消除接地环路
数据采集
工业控制和仪表
测试设备
(1)
封装尺寸(标称值)
19.18mm × 10.60mm
SOP (7)
要了解所有可用封装,请参见数据表末尾的可订购产品附录。
SYNCOUT
SYNCOUT
SYNCIN
Oscillator
800 kHz
Divide-by-2
Reset
Watchdog
Startup
SYNCIN
+VOUT
Power
Stage
Oscillator
800 kHz
Divide-by-2
Reset
±VOUT
Watchdog
Startup
+VOUT
Power
Stage
±VOUT
COM
PSU Thermal
Shutdown
Thermal
Shutdown
+VS
+VS
Power Controller
±VS
单路输出方框图
Power Controller
±VS
双路输出方框图
本文档旨在为方便起见,提供有关
TI 产品中文版本的信息,以确认产品的概要。有关适用的官方英文版本的最新信息,请访问
Copyright
© 2021 Texas Instruments Incorporated
Submit Document Feedback
www.ti.com,其内容始终优先。TI 不保证翻译的准确性和有效性。在实际设计之前,请务必参考最新版本的英文版本。
Product Folder Links: DCP010505B DCP010512B DCP010515B DCP012405B DCP010505DB DCP010507DB
English Data Sheet: SBVS012
DCP010512DB DCP010515DB DCP011512DB DCP011515DB DCP012415DB
1
DCP010505B, DCP010512B, DCP010515B, DCP012405B, DCP010505DB, DCP010507DB
DCP010512DB, DCP010515DB, DCP011512DB, DCP011515DB, DCP012415DB
www.ti.com.cn
ZHCSJP7I – DECEMBER 2000 – REVISED SEPTEMBER 2020
Table of Contents
1 特性................................................................................... 1
2 应用................................................................................... 1
3 说明................................................................................... 1
4 Revision History.............................................................. 2
5 Pin Configuration and Functions...................................4
Pin Functions.................................................................... 4
6 Specifications.................................................................. 5
6.1 Absolute Maximum Ratings........................................ 5
6.2 ESD Ratings............................................................... 5
6.3 Recommended Operating Conditions.........................5
6.4 Thermal Information....................................................5
6.5 Electrical Characteristics.............................................6
6.6 Switching Characteristics............................................6
6.7 Typical Characteristics................................................ 7
7 Detailed Description......................................................12
7.1 Overview................................................................... 12
7.2 Functional Block Diagrams....................................... 12
7.3 Feature Description...................................................13
7.4 Device Functional Modes..........................................16
8 Application and Implementation.................................. 18
8.1 Application Information............................................. 18
8.2 Typical Application.................................................... 18
9 Power Supply Recommendations................................23
10 Layout...........................................................................24
10.1 Layout Guidelines................................................... 24
10.2 Layout Example...................................................... 24
11 Device and Documentation Support..........................26
11.1 Device Support........................................................26
11.2 Documentation Support.......................................... 26
11.3 Receiving Notification of Documentation Updates.. 26
11.4 Support Resources................................................. 26
11.5 Trademarks............................................................. 26
11.6 Glossary.................................................................. 26
11.7 Electrostatic Discharge Caution.............................. 26
12 Mechanical, Packaging, and Orderable
Information.................................................................... 26
4 Revision History
注:以前版本的页码可能与当前版本的页码不同
Changes from Revision H (May 2019) to Revision I (April 2020)
Page
• 更新了整个文档的表、图和交叉参考的编号格式。.............................................................................................1
• 添加了链接至 节 2 ..............................................................................................................................................1
Changes from Revision G (February 2017) to Revision H (May 2019)
Page
• Added 节 7.3.6 .................................................................................................................................................14
• Added 节 7.3.7 .................................................................................................................................................14
• Added 节 7.3.10 ...............................................................................................................................................15
Changes from Revision F (October 2015) to Revision G (February 2017)
Page
• Adjusted Operating temperature specification to "ambient temperature range, TA" in 节 6.3 ........................... 5
Changes from Revision E (December 2000) to Revision F (Octobert 2015)
•
•
•
•
•
•
•
•
•
•
2
Page
添加了 图 3-1 ..................................................................................................................................................... 1
Renamed pin "0V" to "COM" (output side common pin) in 节 Pin Functions .....................................................4
Renamed pin "VS " to "+VS " (input voltage pin) in 节 Pin Functions ................................................................. 4
Renamed pin "0V" to "–VS " (input side common pin) in 节 Pin Functions .......................................................4
Added 节 6.3 ......................................................................................................................................................5
Added 节 6.4 ......................................................................................................................................................5
Added information to the ISOLATION section of 节 6.5 .....................................................................................6
Added 节 7.3.1 to 节 7.3 .................................................................................................................................. 13
Added a typical application design to 节 8.1 ....................................................................................................18
Added 节 9 .......................................................................................................................................................23
Submit Document Feedback
Copyright © 2021 Texas Instruments Incorporated
Product Folder Links: DCP010505B DCP010512B DCP010515B DCP012405B DCP010505DB DCP010507DB
DCP010512DB DCP010515DB DCP011512DB DCP011515DB DCP012415DB
DCP010505B, DCP010512B, DCP010515B, DCP012405B, DCP010505DB, DCP010507DB
DCP010512DB, DCP010515DB, DCP011512DB, DCP011515DB, DCP012415DB
www.ti.com.cn
ZHCSJP7I – DECEMBER 2000 – REVISED SEPTEMBER 2020
Device Comparison Table
at TA = 25°C, +VS = nominal, CIN = 2.2 µF, COUT = 0.1 µF, (unless otherwise noted)
OUTPUT
VOLTAGE
VNOM AT VS (TYP) (V)
75% LOAD
INPUT
VOLTAGE
VS (V)
DEVICE NUMBER
MIN
TYP
MAX
DEVICE
OUTPUT
CURRENT
(mA) (3)
LOAD
REGULATION
10% TO 100%
LOAD (1)
NO LOAD
CURRENT
IQ (mA)
0% LOAD
EFFICIENCY
(%)
100% LOAD
BARRIER
CAPACITANCE
CISO (pF)
VISO = 750Vrms
MIN
TYP
MAX
MAX
TYP
MAX
TYP
TYP
TYP
4.75
5
5.25
200
19
31
20
80
3.6
DCP010505DBP
DCP010505DBP-U
±4.25
±5
±5.75
200(2)
18
32
22
81
3.8
DCP010507DBP
DCP010507DBP-U
±5.75
±6.5
±7.25
153(2)
21
35
38
81
3.0
11.4
12
12.6
83
21
38
29
85
5.1
DCP010512DBP
DCP010512DBP-U
±11.4
±12
±12.6
83(2)
19
37
40
82
4.0
DCP010515BP
DCP010515BP-U
14.25
15
15.75
66
26
42
34
82
3.8
±15 ±15.75
66(2)
19
41
42
85
4.7
±12.6
83
11
39
19
78
2.5
±15 ±15.75
66(2)
12
39
20
80
2.5
5.25
200
13
23
14
77
2.5
±15 ±15.75
66(2)
10
35
17
76
3.8
DCP010505BP
DCP010505BP-U
DCP010512BP
DCP010512BP-U
4.5
5
5.5
DCP010515DBP
DCP010515DBP-U
DCP011512DBP
DCP011512DBP-U
DCP011515DBP
DCP011515DBP-U
DCP012405BP
DCP012405BP-U
DCP012415DBP
DCP012415DBP-U
(1)
(2)
(3)
±14.25
±11.4
13.5
15
±14.25
4.75
21.6
24
±12
16.5
5
26.4
±14.25
Load regulation = (VOUT at 10% load – VOUT at 100%)/VOUT at 75% load
IOUT1 + IOUT2
POUT(max) = 1 W
Copyright © 2021 Texas Instruments Incorporated
Submit Document Feedback
Product Folder Links: DCP010505B DCP010512B DCP010515B DCP012405B DCP010505DB DCP010507DB
DCP010512DB DCP010515DB DCP011512DB DCP011515DB DCP012415DB
3
DCP010505B, DCP010512B, DCP010515B, DCP012405B, DCP010505DB, DCP010507DB
DCP010512DB, DCP010515DB, DCP011512DB, DCP011515DB, DCP012415DB
www.ti.com.cn
ZHCSJP7I – DECEMBER 2000 – REVISED SEPTEMBER 2020
5 Pin Configuration and Functions
+VS
1
–VS
2
14
SYNCIN
8
SYNCOUT
DCP01B
–VOUT
5
+VOUT
6
NC
7
图 5-1. 7-Pin PDIP and SOP (Single Output) NVA and DUA Package (Top View)
+VS
1
–VS
2
14
SYNCIN
8
SYNCOUT
DCP01B
COM
5
+VOUT
6
–VOUT
7
图 5-2. 7-Pin PDIP and SOP (Dual Output) NVA and DUA Package (Top View)
Pin Functions
PIN NUMBER
SINGLEOUTPUT
DUALOUTPUT
I/O (1)
COM
—
5
O
Output side common
NC
7
—
—
No connection
SYNCIN
14
14
I
Synchronization. Synchronize multiple devices by connecting the SYNC
pins of each. Pulling this pin low disables the internal oscillator.
SYNCOUT
8
8
O
Synchronization output. Unrectified transformer output
PIN NAME
+VOUT
6
6
O
Positive output voltage
+VS
1
1
I
Input voltage
–VOUT
5
7
O
Negative output voltage
–VS
2
2
I
Input side common
(1)
4
DESCRIPTION
I = Input, O = Output
Submit Document Feedback
Copyright © 2021 Texas Instruments Incorporated
Product Folder Links: DCP010505B DCP010512B DCP010515B DCP012405B DCP010505DB DCP010507DB
DCP010512DB DCP010515DB DCP011512DB DCP011515DB DCP012415DB
DCP010505B, DCP010512B, DCP010515B, DCP012405B, DCP010505DB, DCP010507DB
DCP010512DB, DCP010515DB, DCP011512DB, DCP011515DB, DCP012415DB
www.ti.com.cn
ZHCSJP7I – DECEMBER 2000 – REVISED SEPTEMBER 2020
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) (1)
MIN
MAX
5-V input devices
Input voltage
15-V input devices
18
24-V input devices
29
Lead temperature (soldering, 10 s)
Storage temperature, Tstg
(1)
UNIT
7
–60
V
270
°C
125
°C
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under
Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device
reliability.
6.2 ESD Ratings
VALUE
V(ESD)
(1)
(2)
Electrostatic discharge
Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001
(1)
±1000
Charged-device model (CDM), per JEDEC specification JESD22-C101 (2)
±250
UNIT
V
JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
Input voltage
MIN
NOM
MAX
5-V input devices
4.5
5
5.5
15-V input devices
13.5
15
16.5
24-V input devices
21.6
24
26.4
Operating ambient temperature range, TA
100
–40
UNIT
V
°C
6.4 Thermal Information
THERMAL METRIC (1)
DCP01B
DCP01B
NVA (PDIP)
DUA (SOP)
UNIT
7 PINS
7 PINS
RθJA
Junction-to-ambient thermal resistance
61
61
°C/W
RθJC(top)
Junction-to-case (top) thermal resistance
26
26
°C/W
RθJB
Junction-to-board thermal resistance
24
24
°C/W
ψJT
Junction-to-top characterization parameter
7
7
°C/W
ψJB
Junction-to-board characterization parameter
24
24
°C/W
RθJC(bot)
Junction-to-case (bottom) thermal resistance
N/A
N/A
°C/W
(1)
For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application
report, SPRA953.
Copyright © 2021 Texas Instruments Incorporated
Submit Document Feedback
Product Folder Links: DCP010505B DCP010512B DCP010515B DCP012405B DCP010505DB DCP010507DB
DCP010512DB DCP010515DB DCP011512DB DCP011515DB DCP012415DB
5
DCP010505B, DCP010512B, DCP010515B, DCP012405B, DCP010505DB, DCP010507DB
DCP010512DB, DCP010515DB, DCP011512DB, DCP011515DB, DCP012415DB
www.ti.com.cn
ZHCSJP7I – DECEMBER 2000 – REVISED SEPTEMBER 2020
6.5 Electrical Characteristics
at TA = 25°C, +VS = nominal, CIN = 2.2 µF, COUT = 0.1 µF, (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
OUTPUT
POUT
Output power
ILOAD = 100% (full load)
VRIPPLE
Output voltage ripple
COUT = 1 μF, ILOAD = 50%
Voltage vs. Temperature
1
W
20
mVPP
–40°C ≤ TA ≤ 25°C
0.046
%/°C
25°C ≤ TA ≤ 100°C
0.016
%/°C
INPUT
VS
Input voltage range
10%
–10%
ISOLATION
Voltage
1-second
flash test
VISO
Isolation
1
kVrms
dV/dt
500
V/s
Leakage current
30
µA
DC
60
VDC
AC
42.5
VAC
Continuous
working voltage
across isolation
barrier
LINE REGULATION
VOUT
Output voltage
IOUT ≥ 10% load current and
constant,
VS (min) to VS (typ)
1%
15%
IOUT ≥ 10% load current and
constant,
VS (typ) to VS (max)
1%
15%
RELIABILITY
Demonstrated
TA = 55°C
55
FITS
150
°C
3
mA
THERMAL SHUTDOWN
TSD
Die temperature at shutdown
ISD
Shutdown current
6.6 Switching Characteristics
at TA = +25°C, +VS = nominal, CIN = 2.2 µF, COUT = 0.1 µF, (unless otherwise noted)
PARAMETER
fOSC
Oscillator frequency
VIL
Low-level input voltage, SYNC
ISYNC
Input current, SYNC
tDISABLE
Disable time
CSYNC
Capacitance loading on SYNC
pin (1)
(1)
6
TEST CONDITIONS
MIN
fSW = fOSC/2
TYP
0
VSYNC = 2 V
MAX
800
UNIT
kHz
0.4
V
75
µA
2
µs
External
3
pF
The application report External Synchronization of the DCP01/02 Series of DC/DC Converters (SBAA035) describes this configuration.
Submit Document Feedback
Copyright © 2021 Texas Instruments Incorporated
Product Folder Links: DCP010505B DCP010512B DCP010515B DCP012405B DCP010505DB DCP010507DB
DCP010512DB DCP010515DB DCP011512DB DCP011515DB DCP012415DB
DCP010505B, DCP010512B, DCP010515B, DCP012405B, DCP010505DB, DCP010507DB
DCP010512DB, DCP010515DB, DCP011512DB, DCP011515DB, DCP012415DB
www.ti.com.cn
ZHCSJP7I – DECEMBER 2000 – REVISED SEPTEMBER 2020
6.7 Typical Characteristics
At TA = 25°C, V+VS = nominal, (unless otherwise noted)
60
60
Standard Limits
Class A
Class B
40
30
20
10
0
Standard Limits
50
Emission Level, Peak (dBµA)
Emission Level, Peak (dBµA)
50
10
40
30
20
10
0
±10
20
0.15
1
Frequency(MHz)
DCP010505B
10
±20
0.15
30
125% Load
1
Frequency(MHz)
DCP010505B
图 6-1. Conducted Emissions
10
30
8% Load
图 6-2. Conducted Emissions
5.5
50
5.4
1-mF Ceramic
4.7-mF Ceramic
10-mF Ceramic
45
40
5.3
35
Output Voltage (V)
Ripple (mVPP)
Class A
Class B
30
25
20
15
10
5.2
5.1
5.0
4.9
4.8
4.7
4.6
5
4.5
0
10
20
30
40
50
60
70
80
Load (%)
DCP010505B
100
4.4
4.5
4.6
4.7
4.8
4.9
5.0
5.1
5.2
5.3
5.4
5.5
Input Voltage (V)
20-MHz BW
图 6-3. Output Ripple versus Load
Copyright © 2021 Texas Instruments Incorporated
90
DCP010505B
图 6-4. Line Regulation
Submit Document Feedback
Product Folder Links: DCP010505B DCP010512B DCP010515B DCP012405B DCP010505DB DCP010507DB
DCP010512DB DCP010515DB DCP011512DB DCP011515DB DCP012415DB
7
DCP010505B, DCP010512B, DCP010515B, DCP012405B, DCP010505DB, DCP010507DB
DCP010512DB, DCP010515DB, DCP011512DB, DCP011515DB, DCP012415DB
www.ti.com.cn
ZHCSJP7I – DECEMBER 2000 – REVISED SEPTEMBER 2020
5.8
85
5.7
5.6
Output Voltage (V)
Efficiency (%)
80
75
70
65
5.5
5.4
5.3
5.2
5.1
5.0
4.9
60
4.8
4.7
10
55
10
20
30
40
50
60
70
80
90
100
20
30
40
50
60
70
80
DCP010505B
DCP010505B
100
Note: Operations under 10% Load
图 6-6. Load Regulation
图 6-5. Efficiency versus Load
5.8
85
+VOUT
5.7
80
±VOUT
5.6
Output Voltage (V)
Efficiency (%)
90
Load (%)
Load (%)
75
70
65
5.5
5.4
5.3
5.2
5.1
5.0
4.9
60
4.8
55
10
20
30
40
50
60
70
80
90
4.7
10
100
20
30
40
50
60
70
80
90
100
Load (%)
Load (%)
DCP010505DB
DCP010505DB
Note: Operations under 10% Load
图 6-8. Load Regulation
图 6-7. Efficiency versus Load
85
7.6
80
7.4
+VOUT
7.2
Output Voltage (V)
75
Efficiency (%)
±VOUT
70
65
60
7
6.8
6.6
6.4
55
6.2
50
20
30
40
50
60
70
80
90
100
6
10
20
DCP010507DB
图 6-9. Efficiency versus Load
8
Submit Document Feedback
30
40
50
60
70
80
90
100
Load (%)
Load (%)
DCP010507DB
Note: Operations under 10% Load
图 6-10. Load Regulation
Copyright © 2021 Texas Instruments Incorporated
Product Folder Links: DCP010505B DCP010512B DCP010515B DCP012405B DCP010505DB DCP010507DB
DCP010512DB DCP010515DB DCP011512DB DCP011515DB DCP012415DB
DCP010505B, DCP010512B, DCP010515B, DCP012405B, DCP010505DB, DCP010507DB
DCP010512DB, DCP010515DB, DCP011512DB, DCP011515DB, DCP012415DB
www.ti.com.cn
ZHCSJP7I – DECEMBER 2000 – REVISED SEPTEMBER 2020
90
14.5
85
14.0
Output Voltage (V)
Efficiency (%)
80
75
70
65
60
13.0
12.5
12.0
11.5
55
50
10
13.5
20
30
40
50
60
70
80
90
11.0
100
10
20
30
40
Load (%)
50
60
70
80
90
100
Load (%)
DCP010512B
DCP010512B
图 6-11. Efficiency versus Load
Note: Operations under 10% Load
图 6-12. Load Regulation
14.5
85
14.0
80
13.5
13.0
VOUT (V)
Efficiency (%)
75
70
65
12.5
12.0
11.5
60
11.0
55
+VOUT
-VOUT
10.5
10.00
50
10
20
30
40
50
60
70
80
90
10
100
20
30
40
DCP010512DB
DCP010512DB
60
70
80
90
100
Note: Operations under 10% Load
图 6-14. Load Regulation
85
17.5
80
17.0
75
16.5
Output Voltage (V)
Efficiency (%)
图 6-13. Efficiency versus Load
70
65
60
16.0
15.5
15.0
14.5
55
50
10
50
Load (%)
Load (%)
14.0
20
30
40
50
60
70
80
90
100
10
20
图 6-15. Efficiency versus Load
Copyright © 2021 Texas Instruments Incorporated
40
50
60
70
80
90
100
Load (%)
Load (%)
DCP010515B
30
DCP010515B
Note: Operations under 10% Load
图 6-16. Load Regulation
Submit Document Feedback
Product Folder Links: DCP010505B DCP010512B DCP010515B DCP012405B DCP010505DB DCP010507DB
DCP010512DB DCP010515DB DCP011512DB DCP011515DB DCP012415DB
9
DCP010505B, DCP010512B, DCP010515B, DCP012405B, DCP010505DB, DCP010507DB
DCP010512DB, DCP010515DB, DCP011512DB, DCP011515DB, DCP012415DB
www.ti.com.cn
ZHCSJP7I – DECEMBER 2000 – REVISED SEPTEMBER 2020
18
90
85
17
75
VOUT (V)
Efficiency (%)
80
70
16
65
15
60
+VOUT
-VOUT
55
14
50
10
20
30
40
50
60
70
80
90
10
100
20
30
40
50
60
70
80
DCP010515DB
DCP010515DB
图 6-17. Efficiency versus Load
100
Note: Operations under 10% Load
图 6-18. Load Regulation
13.5
80
+VOUT
75
±VOUT
13.0
Output Voltage (V)
70
65
Efficiency (%)
90
Load (%)
Load (%)
60
55
50
45
40
12.5
12.0
11.5
11.0
35
30
10
20
30
40
50
60
70
80
90
10.5
10
100
20
30
40
50
60
70
80
90
100
Load (%)
Load (%)
DCP011512DB
DCP011512DB
Note: Operations under 10% Load
图 6-20. Load Regulation
图 6-19. Efficiency versus Load
17
90
+VOUT
16.5
80
±VOUT
Output Voltage (V)
Efficiency (%)
16
70
60
50
15.5
15
14.5
14
40
30
10
13.5
20
30
40
50
60
70
80
90
100
13
10
20
DCP011515DB
图 6-21. Efficiency versus Load
10
Submit Document Feedback
30
40
50
60
70
80
90
100
Load (%)
Load (%)
DCP011515DB
Note: Operations under 10% Load
图 6-22. Load Regulation
Copyright © 2021 Texas Instruments Incorporated
Product Folder Links: DCP010505B DCP010512B DCP010515B DCP012405B DCP010505DB DCP010507DB
DCP010512DB DCP010515DB DCP011512DB DCP011515DB DCP012415DB
DCP010505B, DCP010512B, DCP010515B, DCP012405B, DCP010505DB, DCP010507DB
DCP010512DB, DCP010515DB, DCP011512DB, DCP011515DB, DCP012415DB
www.ti.com.cn
ZHCSJP7I – DECEMBER 2000 – REVISED SEPTEMBER 2020
90
5.60
80
5.50
5.40
60
VOUT (V)
Efficiency (%)
70
50
40
5.30
5.20
5.10
30
20
5.00
10
4.90
0
4.80
10
20
30
40
50
60
70
80
90
10
100
20
30
40
50
60
70
80
100
Load (%)
Load (%)
DCP012405B
DCP012405B
图 6-23. Efficiency versus Load
Note: Operations under 10% Load
图 6-24. Load Regulation
16.5
90
+VOUT
80
Output Voltage (V)
Efficiency (%)
70
60
50
40
15.5
15
14.5
14
30
20
10
±VOUT
16
13.5
20
30
40
50
60
70
80
90
100
10
20
DCP012415DB
图 6-25. Efficiency versus Load
Copyright © 2021 Texas Instruments Incorporated
30
40
50
60
70
80
90
100
Load (%)
Load (%)
DCP012415DB
Note: Operations under 10% Load
图 6-26. Load Regulation
Submit Document Feedback
Product Folder Links: DCP010505B DCP010512B DCP010515B DCP012405B DCP010505DB DCP010507DB
DCP010512DB DCP010515DB DCP011512DB DCP011515DB DCP012415DB
11
DCP010505B, DCP010512B, DCP010515B, DCP012405B, DCP010505DB, DCP010507DB
DCP010512DB, DCP010515DB, DCP011512DB, DCP011515DB, DCP012415DB
www.ti.com.cn
ZHCSJP7I – DECEMBER 2000 – REVISED SEPTEMBER 2020
7 Detailed Description
7.1 Overview
The DCP01B offers up to 1 W of isolated, unregulated output power from a 5-V, 15-V, or 24-V input source with a
typical efficiency of up to 85%. This efficiency is achieved through highly integrated packaging technology and
the implementation of a custom power stage and control device. The DCP01B devices are specified for
operational isolation only. The circuit design uses an advanced BiCMOS and DMOS process.
7.2 Functional Block Diagrams
SYNCOUT
SYNCIN
Oscillator
800 kHz
Divide-by-2
Reset
Watchdog
Startup
+VOUT
Power
Stage
±VOUT
Thermal
Shutdown
+VS
Power Controller
±VS
图 7-1. Single Output Device
SYNCOUT
SYNCIN
Oscillator
800 kHz
Divide-by-2
Reset
Watchdog
Startup
+VOUT
Power
Stage
±VOUT
COM
PSU Thermal
Shutdown
+VS
Power Controller
±VS
图 7-2. Dual Output Device
12
Submit Document Feedback
Copyright © 2021 Texas Instruments Incorporated
Product Folder Links: DCP010505B DCP010512B DCP010515B DCP012405B DCP010505DB DCP010507DB
DCP010512DB DCP010515DB DCP011512DB DCP011515DB DCP012415DB
DCP010505B, DCP010512B, DCP010515B, DCP012405B, DCP010505DB, DCP010507DB
DCP010512DB, DCP010515DB, DCP011512DB, DCP011515DB, DCP012415DB
www.ti.com.cn
ZHCSJP7I – DECEMBER 2000 – REVISED SEPTEMBER 2020
7.3 Feature Description
7.3.1 Isolation
Underwriters Laboratories, UL™ defines several classes of isolation that are used in modern power supplies.
Safety extra low voltage (SELV) is defined by UL (UL1950 E199929) as a secondary circuit which is so
designated and protected that under normal and single fault conditions the voltage between any two accessible
parts, or between an accessible part and the equipment earthing terminal for operational isolation does not
exceed steady state 42.5 V peak or 60 VDC for more than one second.
7.3.1.1 Operation or Functional Isolation
Operational or functional isolation is defined by the use of a high-potential (hipot) test only. Typically, this
isolation is defined as the use of insulated wire in the construction of the transformer as the primary isolation
barrier. The hipot one-second duration test (dielectric voltage, withstand test) is a production test used to verify
that the isolation barrier is functioning. Products with operational isolation must never be used as an element in a
safety-isolation system.
7.3.1.2 Basic or Enhanced Isolation
Basic or enhanced isolation is defined by specified creepage and clearance limits between the primary and
secondary circuits of the power supply. Basic isolation is the use of an isolation barrier in addition to the
insulated wire in the construction of the transformer. Input and output circuits must also be physically separated
by specified distances.
7.3.1.3 Continuous Voltage
For a device that has no specific safety agency approvals (operational isolation), the continuous voltage that can
be applied across the part in normal operation is less than 42.5 VRMS, or 60 VDC. Ensure that both input and
output voltages maintain normal SELV limits. The isolation test voltage represents a measure of immunity to
transient voltages.
WARNING
Do not use the device as an element of a safety isolation system that exceeds the SELV limit.
If the device is expected to function correctly with more than 42.5 VRMS or 60 VDC applied continuously across
the isolation barrier, then the circuitry on both sides of the barrier must be regarded as operating at an unsafe
voltage, and further isolation or insulation systems must form a barrier between these circuits and any useraccessible circuitry according to safety standard requirements.
7.3.1.4 Isolation Voltage
The terms Hipot test, flash-tested, withstand voltage, proof voltage, dielectric withstand voltage, and isolation
test voltage all describe a similar idea. They describe a test voltage applied for a specified time across a
component designed to provide electrical isolation to verify the integrity of that isolation. TI’s DCP01B series of
DC/DC converters are all 100% production tested at 1.0 kVAC for one second.
7.3.1.5 Repeated High-Voltage Isolation Testing
Repeated high-voltage isolation testing of a barrier component can degrade the isolation capability, depending
on materials, construction, and environment. The DCP01B series of DC/DC converters have toroidal, enameled,
wire isolation transformers with no additional insulation between the primary and secondary windings. While a
device can be expected to withstand several times the stated test voltage, the isolation capability depends on
the wire insulation. Any material, including this enamel (typically polyurethane), is susceptible to eventual
chemical degradation when subject to very-high applied voltages. Therefore, strictly limit the number of highvoltage tests and repeated high-voltage isolation testing. However, if it is absolutely required, reduce the voltage
by 20% from specified test voltage with a duration limit of one second per test.
Copyright © 2021 Texas Instruments Incorporated
Submit Document Feedback
Product Folder Links: DCP010505B DCP010512B DCP010515B DCP012405B DCP010505DB DCP010507DB
DCP010512DB DCP010515DB DCP011512DB DCP011515DB DCP012415DB
13
DCP010505B, DCP010512B, DCP010515B, DCP012405B, DCP010505DB, DCP010507DB
DCP010512DB, DCP010515DB, DCP011512DB, DCP011515DB, DCP012415DB
www.ti.com.cn
ZHCSJP7I – DECEMBER 2000 – REVISED SEPTEMBER 2020
7.3.2 Power Stage
The DCP01B series of devices uses a push-pull, center-tapped topology. The DCP01B devices switch at 400
kHz (divide-by-2 from an 800-kHz oscillator).
7.3.3 Oscillator And Watchdog Circuit
The onboard, 800-kHz oscillator generates the switching frequency by a divide-by-2 circuit. The oscillator can be
synchronized to other DCP01B series device circuits or an external source, and is used to minimize system
noise.
A watchdog circuit checks the operation of the oscillator circuit. The oscillator can be disabled by pulling the
SYNCIN pin low. When the SYNCIN pin goes low, the output pins transition into tri-state mode, which occurs
within 2 μs.
7.3.4 Thermal Shutdown
The DCP01B series of devices are protected by a thermal-shutdown circuit.
If the on-chip temperature rises above 150°C, the device shuts down. Normal operation resumes as soon as the
temperature falls below 150°C. While the over temperature condition continues, operation randomly cycles on
and off. This cycling continues until the temperature is reduced.
7.3.5 Synchronization
When more than one DC/DC converter is needed onboard, beat frequencies and other electrical interference
can be generated. This interference occurs because of the small variations in switching frequencies between the
DC/DC converters.
The DCP01B series of devices overcomes this interference by allowing devices to synchronize to one another.
Synchronize up to eight devices by connecting the SYNC pins of each device, taking care to minimize the
capacitance of tracking. Stray capacitance (greater than 3 pF) reduces the switching frequency, or can
sometimes stop the oscillator circuit. The maximum recommended voltage applied to the SYNC pin is 3.0 V.
For an application that uses more than eight synchronized devices, use an external device to drive the SYNC
pins. The application report External Synchronization of the DCP01/02 Series of DC/DC Converters describes
this configuration.
Note
During the start-up period, all synchronized devices draw maximum current from the input
simultaneously. If the input voltage falls below approximately 4 V, the devices may not start up.
A 2.2-μF capacitor should be connected close to each device input pin.
7.3.6 Light Load Operation (< 10%)
Operation below 10% load can cause the output voltage to increase up to double the typical output voltage. For
applications that operate less than 10% of rated output current, it is recommended to add a minimum load to
ensure the output voltage of the device is within the load regulation range. For example, connect a 250-Ω preload resistor to meet the 10% minimum load condition for the DCP010505BP.
7.3.7 Load Regulation (10% to 100%)
The load regulation of the DCP01B series of devices is specified at 10% to 100% load. Placing a minimum 10%
load will ensure the output voltage is within the range specified in 节 6.5. For more information regarding
operation below 10% load, see 节 7.3.6.
7.3.8 Construction
The basic construction of the DCP01B series of devices is the same as standard integrated circuits. The molded
package contains no substrate. The DCP01B series of devices are constructed using an IC, rectifier diodes, and
a wound magnetic toroid on a lead frame. Because the package contains no solder, the devices do not require
14
Submit Document Feedback
Copyright © 2021 Texas Instruments Incorporated
Product Folder Links: DCP010505B DCP010512B DCP010515B DCP012405B DCP010505DB DCP010507DB
DCP010512DB DCP010515DB DCP011512DB DCP011515DB DCP012415DB
DCP010505B, DCP010512B, DCP010515B, DCP012405B, DCP010505DB, DCP010507DB
DCP010512DB, DCP010515DB, DCP011512DB, DCP011515DB, DCP012415DB
www.ti.com.cn
ZHCSJP7I – DECEMBER 2000 – REVISED SEPTEMBER 2020
any special printed circuit board (PCB) assembly processing. This architecture results in an isolated DC/DC
converter with inherently high reliability.
7.3.9 Thermal Management
Due to the high power density of these devices, it is advisable to provide ground planes on the input and output
rails.
7.3.10 Power-Up Characteristics
The DCP01B series of devices do not include a soft-start feature. Therefore, a high in-rush current during power
up is expected. Refer to the DCPA1 series of devices for a 1-W, isolated, unregulated DC/DC converter module
with soft start included. 图 7-3 shows the typical start-up waveform for a DCP010505BP, operating from a 5-V
input with no load on the output. 图 7-4 shows the start-up waveform for a DCP010505BP starting up into a 10%
load. 图 7-5 shows the start-up waveform starting up into a full (100%) load.
图 7-3. DCP010505BP Start-Up at No Load
图 7-4. DCP010505BP Start-Up at 10% Load
图 7-5. DCP010505BP Start-Up at 100% Load
Copyright © 2021 Texas Instruments Incorporated
Submit Document Feedback
Product Folder Links: DCP010505B DCP010512B DCP010515B DCP012405B DCP010505DB DCP010507DB
DCP010512DB DCP010515DB DCP011512DB DCP011515DB DCP012415DB
15
DCP010505B, DCP010512B, DCP010515B, DCP012405B, DCP010505DB, DCP010507DB
DCP010512DB, DCP010515DB, DCP011512DB, DCP011515DB, DCP012415DB
www.ti.com.cn
ZHCSJP7I – DECEMBER 2000 – REVISED SEPTEMBER 2020
7.4 Device Functional Modes
7.4.1 Disable and Enable (SYNCIN Pin)
Each of the DCP01B series devices can be disabled or enabled by driving the SYNCIN pin using an open-drain
CMOS gate. If the SYNC IN pin is pulled low, the DCP01B becomes disabled. The disable time depends upon the
external loading. The internal disable function is implemented within 2 μs. Removal of the pulldown causes the
DCP01B to be enabled.
Capacitive loading on the SYNCIN pin must be minimized (≤ 3 pF) to prevent a reduction in the oscillator
frequency. The application report External Synchronization of the DCP01/02 Series of DC/DC Converters
describes disable and enable control circuitry.
7.4.2 Decoupling
7.4.2.1 Ripple Reduction
The high switching frequency of 400 kHz allows simple filtering. To reduce ripple, it is recommended that a
minimum of 1-μF capacitor be used on the +VOUT pin. For dual output devices, decouple both of the outputs to
the COM pin. The required 2.2-μF, low ESR ceramic input capacitor also helps reduce ripple and noise, (24-V
input voltage versions require only 0.47 µF of input capacitance). See application report DC-to-DC Converter
Noise Reduction.
7.4.2.2 Connecting the DCP01B in Series
Multiple DCP01B isolated 1-W DC/DC converters can be connected in series to provide non-standard voltage
rails. This configuration is possible by using the floating outputs provided by the galvanic isolation of the DCP01.
Connect the +VOUT from one DCP01B to the –VOUT of another (see 图 7-6). If the SYNCIN pins are tied
together, the self-synchronization feature of the DCP01B prevents beat frequencies on the voltage rails. The
synchronization feature of the DCP01B allows easy series connection without external filtering, thus minimizing
cost.
VIN
+VS
CIN
SYNCIN
CIN
+VOUT1
DCP
COUT
1.0 µF
01B
–VS
–VOUT1
VS
+VOUT2
SYNCIN
DCP
–VS
VOUT1
+
VOUT2
COUT
1.0 µF
01B
–VOUT2
图 7-6. Multiple DCP01B Devices Connected in Series
The outputs of a dual-output DCP01B can also be connected in series to provide two times the magnitude of
+VOUT, as shown in 图 7-7. For example, connect a dual-output, 15-V, DCP012415DB device to provide a 30-V
rail.
VIN
+VS
CIN
+VOUT
DCP
–VS
01B
+VOUT
COUT
1.0 µF
–VOUT
–VOUT
COUT
1.0 µF
COM
图 7-7. Dual Output Devices Connected in Series
16
Submit Document Feedback
Copyright © 2021 Texas Instruments Incorporated
Product Folder Links: DCP010505B DCP010512B DCP010515B DCP012405B DCP010505DB DCP010507DB
DCP010512DB DCP010515DB DCP011512DB DCP011515DB DCP012415DB
DCP010505B, DCP010512B, DCP010515B, DCP012405B, DCP010505DB, DCP010507DB
DCP010512DB, DCP010515DB, DCP011512DB, DCP011515DB, DCP012415DB
www.ti.com.cn
ZHCSJP7I – DECEMBER 2000 – REVISED SEPTEMBER 2020
7.4.2.3 Connecting the DCP01B in Parallel
If the output power from one DCP01B is not sufficient, it is possible to parallel the outputs of multiple DCP01Bs,
as shown in 图 7-8 (applies to single output devices only). The synchronization feature allows easy
synchronization to prevent power-rail beat frequencies at no additional filtering cost.
VIN
+VS
SYNCIN
CIN
+VOUT1
DCP
01B
–VS
COUT
1.0 µF
–VOUT1
2 × Power Out
+VS
CIN
SYNCIN
–VS
+VOUT2
DCP
COUT
1.0 µF
01B
–VOUT2
GND
图 7-8. Multiple DCP01B Devices Connected in Parallel
Copyright © 2021 Texas Instruments Incorporated
Submit Document Feedback
Product Folder Links: DCP010505B DCP010512B DCP010515B DCP012405B DCP010505DB DCP010507DB
DCP010512DB DCP010515DB DCP011512DB DCP011515DB DCP012415DB
17
DCP010505B, DCP010512B, DCP010515B, DCP012405B, DCP010505DB, DCP010507DB
DCP010512DB, DCP010515DB, DCP011512DB, DCP011515DB, DCP012415DB
www.ti.com.cn
ZHCSJP7I – DECEMBER 2000 – REVISED SEPTEMBER 2020
8 Application and Implementation
Note
Information in the following applications sections is not part of the TI component specification, and TI
does not warrant its accuracy or completeness. TI’s customers are responsible for determining
suitability of components for their purposes. Customers should validate and test their design
implementation to confirm system functionality.
8.1 Application Information
8.2 Typical Application
VIN
+VOUT
+VS
CIN
2.2 µF
SYNC
+VOUT
DCP01B
–VS
COUT
1.0 µF
–VOUT
–VOUT
图 8-1. Typical DCP010505 Application
8.2.1 Design Requirements
For this design example, use the parameters listed in 表 8-1 and follow the design procedures shown in the 节
8.2.2.
表 8-1. Design Example Parameters
PARAMETER
VALUE
UNIT
V(+VS)
Input voltage
5
V
V(+VOUT)
Output voltage
5
V
IOUT
Output current rating
200
mA
fSW
Operating frequency
400
kHz
8.2.2 Detailed Design Procedure
8.2.2.1 Input Capacitor
For all 5-V and 15-V input voltage designs, select a 2.2-μF low-ESR ceramic input capacitor to ensure a good
startup performance. 24-V input applications require only 0.47-μF of input capacitance.
8.2.2.2 Output Capacitor
For any DCP01B design, select a 1.0-μF low-ESR ceramic output capacitor to reduce output ripple.
8.2.2.3 SYNCIN Pin
In a stand-alone application, leave the SYNCIN pin floating.
18
Submit Document Feedback
Copyright © 2021 Texas Instruments Incorporated
Product Folder Links: DCP010505B DCP010512B DCP010515B DCP012405B DCP010505DB DCP010507DB
DCP010512DB DCP010515DB DCP011512DB DCP011515DB DCP012415DB
DCP010505B, DCP010512B, DCP010515B, DCP012405B, DCP010505DB, DCP010507DB
DCP010512DB, DCP010515DB, DCP011512DB, DCP011515DB, DCP012415DB
www.ti.com.cn
ZHCSJP7I – DECEMBER 2000 – REVISED SEPTEMBER 2020
8.2.3 DCP010505 Application Curves
5.8
85
5.7
5.6
Output Voltage (V)
Efficiency (%)
80
75
70
65
5.5
5.4
5.3
5.2
5.1
5.0
4.9
60
4.8
55
10
20
30
40
50
60
70
80
90
100
4.7
10
20
30
40
50
60
70
80
90
100
Load (%)
Load (%)
DCP010505B
DCP010505B
Note: Operations under 10% Load
图 8-3. Load Regulation
图 8-2. Efficiency versus Load
8.2.4 PCB Design
The copper losses (resistance and inductance) can be minimized by the use of mutual ground and power planes
(tracks) where possible. If that is not possible, use wide tracks to reduce the losses. If several devices are being
powered from a common power source, a star-connected system for the track must be deployed. Do not connect
the devices in series, because that type of connection cascades the resistive losses. The position of the
decoupling capacitors is important. They must be as close to the devices as possible in order to reduce losses.
See 节 10 for more details.
8.2.5 Decoupling Ceramic Capacitors
Capacitor Impedance (Ÿ )
All capacitors have losses because of internal equivalent series resistance (ESR), and to a lesser degree,
equivalent series inductance (ESL). Values for ESL are not always easy to obtain. However, some
manufacturers provide graphs of frequency versus capacitor impedance. These graphs typically show the
capacitor impedance falling as frequency is increased (as shown in 图 8-4). In 图 8-4, XC is the reactance due to
the capacitance, X L is the reactance due to the ESL, and f0 is the resonant frequency. As the frequency
increases, the impedance stops decreasing and begins to rise. The point of minimum impedance indicates the
resonant frequency of the capacitor. This frequency is where the components of capacitance and inductance
reactance are of equal magnitude. Beyond this point, the capacitor is not effective as a capacitor.
Z
XC
XL
0
Frequency (Hz)
f0
图 8-4. Capacitor Impedance versus Frequency
Copyright © 2021 Texas Instruments Incorporated
Submit Document Feedback
Product Folder Links: DCP010505B DCP010512B DCP010515B DCP012405B DCP010505DB DCP010507DB
DCP010512DB DCP010515DB DCP011512DB DCP011515DB DCP012415DB
19
DCP010505B, DCP010512B, DCP010515B, DCP012405B, DCP010505DB, DCP010507DB
DCP010512DB, DCP010515DB, DCP011512DB, DCP011515DB, DCP012415DB
ZHCSJP7I – DECEMBER 2000 – REVISED SEPTEMBER 2020
www.ti.com.cn
However, there is a 180° phase difference resulting in cancellation of the imaginary component. The resulting
effect is that the impedance at the resonant point is the real part of the complex impedance, namely, the value of
the ESR. The output capacitor's resonant frequency must be higher than the default switching frequency
(800 kHz) of the device to properly decouple noise at and below the switching frequency.
20
Submit Document Feedback
Copyright © 2021 Texas Instruments Incorporated
Product Folder Links: DCP010505B DCP010512B DCP010515B DCP012405B DCP010505DB DCP010507DB
DCP010512DB DCP010515DB DCP011512DB DCP011515DB DCP012415DB
DCP010505B, DCP010512B, DCP010515B, DCP012405B, DCP010505DB, DCP010507DB
DCP010512DB, DCP010515DB, DCP011512DB, DCP011515DB, DCP012415DB
www.ti.com.cn
ZHCSJP7I – DECEMBER 2000 – REVISED SEPTEMBER 2020
The effect of the ESR is to cause a voltage drop within the capacitor. The value of this voltage drop is simply the
product of the ESR and the transient load current, as shown in 方程式 1.
VIN = VPK – (ESR × ITR)
(1)
where
• VIN is the voltage at the device input
• VPK is the maximum value of the voltage on the capacitor during charge
• ITR is the transient load current
The other factor that affects the performance is the value of the capacitance. However, for the input and the full
wave outputs (single-output voltage devices), ESR is the dominant factor.
8.2.6 Input Capacitor and the Effects of ESR
If the input decoupling capacitor is not ceramic (and has an ESR greater than 20 mΩ), then at the instant the
power transistors switch on, the voltage at the input pins falls momentarily. If the voltage falls below
approximately 4 V, the device detects an undervoltage condition and switches the internal drive circuits to a
momentary off state. This detection is carried out as a precaution against a genuine low input voltage condition
that could slow down or even stop the internal circuits from operating correctly. A slow-down or stoppage results
in the drive transistors being turned on too long, causing saturation of the transformer and destruction of the
device.
Following detection of a low input voltage condition, the device switches off the internal drive circuits until the
input voltage returns to a safe value, at which time the device tries to restart. If the input capacitor is still unable
to maintain the input voltage, shutdown recurs. This process repeats until the input capacitor charges sufficiently
to start the device correctly.
Normal start-up should occur in approximately 1 ms after power is applied to the device. If a considerably longer
start-up duration time is encountered, it is likely that either (or both) the input supply or the capacitors are not
performing adequately.
For 5-V to 15-V input devices, a 2.2-μF, low-ESR ceramic capacitor ensures good startup performance. For 24V input voltage devices, 0.47-μF ceramic capacitors are recommended. Tantalum capacitors are not
recommended, since most do not have low-ESR values and will degrade performance. If tantalum capacitors
must be used, close attention must be paid to both the ESR and voltage as derated by the vendor.
Note
During the start-up period, these devices may draw maximum current from the input supply. If
the input voltage falls below approximately 4 V, the devices may not start up. Connect a 2.2-μF
ceramic capacitor close to the input pins.
8.2.7 Ripple and Noise
A good quality, low-ESR ceramic capacitor placed as close as practical across the input reduces reflected ripple
and ensures a smooth start-up.
A good quality, low-ESR ceramic capacitor placed as close as practical across the rectifier output terminal and
output ground gives the best ripple and noise performance. See application report DC-to-DC Converter Noise
Reduction for more information on noise rejection.
8.2.7.1 Output Ripple Calculation Example
The following example shows that increasing the capacitance has a much smaller effect on the output ripple
voltage than does reducing the value of the ESR for the filter capacitor.
To calculate the output ripple for a DCP010505 device:
• VOUT = 5 V
Copyright © 2021 Texas Instruments Incorporated
Submit Document Feedback
Product Folder Links: DCP010505B DCP010512B DCP010515B DCP012405B DCP010505DB DCP010507DB
DCP010512DB DCP010515DB DCP011512DB DCP011515DB DCP012415DB
21
DCP010505B, DCP010512B, DCP010515B, DCP012405B, DCP010505DB, DCP010507DB
DCP010512DB, DCP010515DB, DCP011512DB, DCP011515DB, DCP012415DB
ZHCSJP7I – DECEMBER 2000 – REVISED SEPTEMBER 2020
•
•
•
•
www.ti.com.cn
IOUT = 0.2 A
At full output power, the load resistor is 25 Ω
Ceramic output capacitor of 1 μF, ESR of 0.1 Ω
Capacitor discharge time 1% of 800 kHz (ripple frequency)
tDIS = 0.0125 μs
τ = C × RLOAD
τ = 1 × 10-6 × 12.5 = 12.5 μs
VDIS = VO(1 – EXP(–tDIS / τ))
VDIS = 5 mV
By contrast, the voltage dropped because of ESR:
VESR = ILOAD × ESR
VESR = 20 mV
Ripple voltage = 25 mV
8.2.8 Dual DCP01B Output Voltage
The voltage output for dual DCP01B devices is half wave rectified; therefore, the discharge time is 1.25 μs.
Repeating the above calculations using the 100% load resistance of 50 Ω (0.1 A per output), the results are:
τ = 25 μs
tDIS = 1.25 μs
VDIS = 244 mV
VESR = 10 mV
Ripple Voltage = 133 mV
This time, it is the capacitor discharging that contributes to the largest component of ripple. Changing the output
filter to 10 μF, and repeating the calculations, the result is:
Ripple voltage = 25 mV
This value is composed of almost equal components.
The previous calculations are offered as a guideline only. Capacitor parameters usually have large tolerances
and can be susceptible to environmental conditions.
8.2.9 Optimizing Performance
Optimum performance can only be achieved if the device is correctly supported. The very nature of a switching
converter requires power to be instantly available when it switches on. If the converter has DMOS switching
transistors, the fast edges will create a high current demand on the input supply. This transient load placed on
the input is supplied by the external input decoupling capacitor, thus maintaining the input voltage. Therefore, the
input supply does not see this transient (this is an analogy to high-speed digital circuits). The positioning of the
capacitor is critical and must be placed as close as possible to the input pins and connected via a lowimpedance path.
The optimum performance primarily depends on two factors:
• Connection of the input and output circuits for minimal loss.
• The ability of the decoupling capacitors to maintain the input and output voltages at a constant level.
22
Submit Document Feedback
Copyright © 2021 Texas Instruments Incorporated
Product Folder Links: DCP010505B DCP010512B DCP010515B DCP012405B DCP010505DB DCP010507DB
DCP010512DB DCP010515DB DCP011512DB DCP011515DB DCP012415DB
DCP010505B, DCP010512B, DCP010515B, DCP012405B, DCP010505DB, DCP010507DB
DCP010512DB, DCP010515DB, DCP011512DB, DCP011515DB, DCP012415DB
www.ti.com.cn
ZHCSJP7I – DECEMBER 2000 – REVISED SEPTEMBER 2020
9 Power Supply Recommendations
The DCP01B is a switching power supply, and as such can place high peak current demands on the input
supply. To avoid the supply falling momentarily during the fast switching pulses, ground and power planes must
be used to connect the power to the input of DCP01 device. If this connection is not possible, then the supplies
must be connected in a star formation with the traces made as wide as possible.
Copyright © 2021 Texas Instruments Incorporated
Submit Document Feedback
Product Folder Links: DCP010505B DCP010512B DCP010515B DCP012405B DCP010505DB DCP010507DB
DCP010512DB DCP010515DB DCP011512DB DCP011515DB DCP012415DB
23
DCP010505B, DCP010512B, DCP010515B, DCP012405B, DCP010505DB, DCP010507DB
DCP010512DB, DCP010515DB, DCP011512DB, DCP011515DB, DCP012415DB
www.ti.com.cn
ZHCSJP7I – DECEMBER 2000 – REVISED SEPTEMBER 2020
10 Layout
10.1 Layout Guidelines
Due to the high power density of these devices, provide ground planes on the input and output rails.
图 10-1 and 图 10-2 show the schematic for the two DIP through-hole packages, and two SOP surface-mount
packages for the DCP family of products which include DCP01B, DCP02, DCV01, DCR01, and DCR02. 图 10-3
and 图 10-4 illustrate a printed circuit board (PCB) layout for the schematics.
Including input power and ground planes provides a low-impedance path for the input power. For the output, the
COM signal connects via a ground plane, while the connections for the positive and negative voltage outputs
conduct via wide traces in order to minimize losses.
The output should be taken from the device using ground and power planes, thereby ensuring minimum losses.
The location of the decoupling capacitors in close proximity to their respective pins ensures low losses due to the
effects of stray inductance, thus improving the ripple performance. This location is of particular importance to the
input decoupling capacitor, because this capacitor supplies the transient current associated with the fast
switching waveforms of the power drive circuits.
Allow the unused SYNC pin, to remain configured as a floating pad. It is advisable to place a guard ring
(connected to input ground) or annulus connected around this pin to avoid any noise pick up. When connecting a
SYNC pin to one or more SYNC design the linking trace to be short and narrow to avoid stray capacitance.
Ensure that no other trace is in close proximity to this trace SYNC trace to decrease the stray capacitance on
this pin. The stray capacitance affects the performance of the oscillator.
10.2 Layout Example
CON1
VS1
1
+VS SYNC 14
CON3
JP1
VS3
1
C1
+VS SYNC 28
JP1
C11
NC 27
0V1
2
0V3
–VS
DCP02xxxxP
+V1
6
C3
C2-1
+VOUT
+V3
C2
–VS
3
–VS
C12
R5
5
COM1
C5
C4-1
NC 26
13 +VOUT
C13
R1
2
DCP02xxxxU
COM
12 COM
C4
COM3
C14
R2
C15
R6
– V1
7
–VOUT
– V3
14 –VOUT
CON2
VS2
1
+VS SYNC 14
CON4
JP2
VS4
1
C6
+VS SYNC 28
JP2
C16
NC 27
0V2
2
–VS
0V4
DCP02xxxxP
+V2
6
C8
C7-1
+VOUT
C7
+V4
COM2
C10
C9-1
12 COM
COM4
R4
– V2
7
Submit Document Feedback
C20
C19
R8
–VOUT
图 10-1. PCB Schematic, P Package
24
NC 26
DCP02xxxxU
COM
C9
–VS
C18
R7
5
–VS
3
13 +VOUT
C17
R3
2
– V4
14 –VOUT
图 10-2. PCB Schematic, U Package
Copyright © 2021 Texas Instruments Incorporated
Product Folder Links: DCP010505B DCP010512B DCP010515B DCP012405B DCP010505DB DCP010507DB
DCP010512DB DCP010515DB DCP011512DB DCP011515DB DCP012415DB
DCP010505B, DCP010512B, DCP010515B, DCP012405B, DCP010505DB, DCP010507DB
DCP010512DB, DCP010515DB, DCP011512DB, DCP011515DB, DCP012415DB
www.ti.com.cn
ZHCSJP7I – DECEMBER 2000 – REVISED SEPTEMBER 2020
图 10-3. PCB Layout Example, Component-Side View
图 10-4. PCB Layout Example, Non-Component-Side View
Copyright © 2021 Texas Instruments Incorporated
Submit Document Feedback
Product Folder Links: DCP010505B DCP010512B DCP010515B DCP012405B DCP010505DB DCP010507DB
DCP010512DB DCP010515DB DCP011512DB DCP011515DB DCP012415DB
25
DCP010505B, DCP010512B, DCP010515B, DCP012405B, DCP010505DB, DCP010507DB
DCP010512DB, DCP010515DB, DCP011512DB, DCP011515DB, DCP012415DB
www.ti.com.cn
ZHCSJP7I – DECEMBER 2000 – REVISED SEPTEMBER 2020
11 Device and Documentation Support
11.1 Device Support
11.1.1 Device Nomenclature
DCP01
05
05
(D)
B
(P)
Basic model number: 1-W product
Voltage input:
5, 15, or 24
Voltage output:
5, 7, 12 or 15
Output type:
S (single) or D (dual)
Series
Series B
Package code:
P = 7-pin PDIP (NVA package)
P-U = 7-pin SOP (DUA package)
图 11-1. Supplemental Ordering Information
11.2 Documentation Support
11.2.1 Related Documentation
• DC-to-DC Converter Noise Reduction
• External Synchronization of the DCP01/02 Series of DC/DC Converters
• Optimizing Performance of the DCP01/02 Series of DC/DC Converters
11.3 Receiving Notification of Documentation Updates
To receive notification of documentation updates, navigate to the device product folder on ti.com. Click on
Subscribe to updates to register and receive a weekly digest of any product information that has changed. For
change details, review the revision history included in any revised document.
11.4 Support Resources
TI E2E ™ support forums are an engineer's go-to source for fast, verified answers and design help — straight
from the experts. Search existing answers or ask your own question to get the quick design help you need.
Linked content is provided "AS IS" by the respective contributors. They do not constitute TI specifications and do
not necessarily reflect TI's views; see TI's Terms of Use.
11.5 Trademarks
Underwriters Laboratories, UL™ is a trademark of UL LLC.
TI E2E™ is a trademark of Texas Instruments.
所有商标均为其各自所有者的财产。
11.6 Glossary
TI Glossary
This glossary lists and explains terms, acronyms, and definitions.
11.7 Electrostatic Discharge Caution
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled
with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may
be more susceptible to damage because very small parametric changes could cause the device not to meet its published
specifications.
12 Mechanical, Packaging, and Orderable Information
The following pages include mechanical, packaging, and orderable information. This information is the most
current data available for the designated devices. This data is subject to change without notice and revision of
this document. For browser-based versions of this data sheet, refer to the left-hand navigation.
26
Submit Document Feedback
Copyright © 2021 Texas Instruments Incorporated
Product Folder Links: DCP010505B DCP010512B DCP010515B DCP012405B DCP010505DB DCP010507DB
DCP010512DB DCP010515DB DCP011512DB DCP011515DB DCP012415DB
PACKAGE OPTION ADDENDUM
www.ti.com
13-Aug-2021
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
(3)
Device Marking
(4/5)
(6)
DCP010505BP
ACTIVE
PDIP
NVA
7
25
RoHS &
Non-Green
NIPDAU
N / A for Pkg Type
-40 to 100
DCP010505BP
DCP010505BP-U
ACTIVE
SOP
DUA
7
25
RoHS &
Non-Green
NIPDAU
Level-3-260C-168 HR
-40 to 100
DCP010505BP-U
DCP010505BP-U/700
ACTIVE
SOP
DUA
7
700
RoHS &
Non-Green
NIPDAU
Level-3-260C-168 HR
-40 to 100
DCP010505BP-U
DCP010505BP-U/7E4
ACTIVE
SOP
DUA
7
700
RoHS &
Non-Green
NIPDAU
Level-3-260C-168 HR
-40 to 100
DCP010505BP-U
DCP010505BP-UE4
ACTIVE
SOP
DUA
7
25
RoHS &
Non-Green
NIPDAU
Level-3-260C-168 HR
-40 to 100
DCP010505BP-U
DCP010505DBP
ACTIVE
PDIP
NVA
7
25
RoHS &
Non-Green
NIPDAU
N / A for Pkg Type
-40 to 100
DCP010505DBP
DCP010505DBP-U
ACTIVE
SOP
DUA
7
25
RoHS &
Non-Green
NIPDAU
Level-3-260C-168 HR
-40 to 100
DCP010505DBP-U
DCP010505DBP-U/700
ACTIVE
SOP
DUA
7
700
RoHS &
Non-Green
NIPDAU
Level-3-260C-168 HR
-40 to 100
DCP010505DBP-U
DCP010505DBP-U/7E4
ACTIVE
SOP
DUA
7
700
RoHS &
Non-Green
NIPDAU
Level-3-260C-168 HR
-40 to 100
DCP010505DBP-U
DCP010507DBP-U/7E4
ACTIVE
SOP
DUA
7
700
RoHS &
Non-Green
NIPDAU
Level-3-260C-168 HR
-40 to 100
DCP010507DBP-U
DCP010507DBP-UE4
ACTIVE
SOP
DUA
7
25
RoHS &
Non-Green
NIPDAU
Level-3-260C-168 HR
-40 to 100
DCP010507DBP-U
DCP010507DBPE4
ACTIVE
PDIP
NVA
7
25
RoHS &
Non-Green
NIPDAU
N / A for Pkg Type
-40 to 100
DCP010507DBP
DCP010512BP
ACTIVE
PDIP
NVA
7
25
RoHS &
Non-Green
NIPDAU
N / A for Pkg Type
-40 to 100
DCP010512BP
DCP010512BP-U
ACTIVE
SOP
DUA
7
25
RoHS &
Non-Green
NIPDAU
Level-3-260C-168 HR
-40 to 100
DCP010512BP-U
DCP010512BP-U/700
ACTIVE
SOP
DUA
7
700
RoHS &
Non-Green
NIPDAU
Level-3-260C-168 HR
-40 to 100
DCP010512BP-U
DCP010512DBP
ACTIVE
PDIP
NVA
7
25
RoHS &
Non-Green
NIPDAU
N / A for Pkg Type
-40 to 100
DCP010512DBP
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
13-Aug-2021
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
(3)
Device Marking
(4/5)
(6)
DCP010512DBP-U
ACTIVE
SOP
DUA
7
25
RoHS &
Non-Green
NIPDAU
Level-3-260C-168 HR
-40 to 100
DCP010512DBP-U
DCP010512DBP-U/700
ACTIVE
SOP
DUA
7
700
RoHS &
Non-Green
NIPDAU
Level-3-260C-168 HR
-40 to 100
DCP010512DBP-U
DCP010512DBPE4
ACTIVE
PDIP
NVA
7
25
RoHS &
Non-Green
NIPDAU
N / A for Pkg Type
-40 to 100
DCP010512DBP
DCP010515BP
ACTIVE
PDIP
NVA
7
25
RoHS &
Non-Green
NIPDAU
N / A for Pkg Type
-40 to 100
DCP010515BP
DCP010515BP-U
ACTIVE
SOP
DUA
7
25
RoHS &
Non-Green
NIPDAU
Level-3-260C-168 HR
-40 to 100
DCP010515BP-U
DCP010515BP-U/700
ACTIVE
SOP
DUA
7
700
RoHS &
Non-Green
NIPDAU
Level-3-260C-168 HR
-40 to 100
DCP010515BP-U
DCP010515DBP
ACTIVE
PDIP
NVA
7
25
RoHS &
Non-Green
NIPDAU
N / A for Pkg Type
-40 to 100
DCP010515DBP
DCP010515DBP-U
ACTIVE
SOP
DUA
7
25
RoHS &
Non-Green
NIPDAU
Level-3-260C-168 HR
-40 to 100
DCP010515DBP-U
DCP010515DBP-U/700
ACTIVE
SOP
DUA
7
700
RoHS &
Non-Green
NIPDAU
Level-3-260C-168 HR
-40 to 100
DCP010515DBP-U
DCP011512DBP
ACTIVE
PDIP
NVA
7
25
RoHS &
Non-Green
NIPDAU
N / A for Pkg Type
-40 to 100
DCP011512DBP
DCP011512DBP-U
ACTIVE
SOP
DUA
7
25
RoHS &
Non-Green
NIPDAU
Level-3-260C-168 HR
-40 to 100
DCP011512DBP-U
DCP011515DBP
ACTIVE
PDIP
NVA
7
25
RoHS &
Non-Green
NIPDAU
N / A for Pkg Type
-40 to 100
DCP011515DBP
DCP011515DBP-U
ACTIVE
SOP
DUA
7
25
RoHS &
Non-Green
NIPDAU
Level-3-260C-168 HR
-40 to 100
DCP011515DBP-U
DCP011515DBP-U/700
ACTIVE
SOP
DUA
7
700
RoHS &
Non-Green
NIPDAU
Level-3-260C-168 HR
-40 to 100
DCP011515DBP-U
DCP012405BP
ACTIVE
PDIP
NVA
7
25
RoHS &
Non-Green
NIPDAU
N / A for Pkg Type
-40 to 100
DCP012405BP
DCP012405BP-U
ACTIVE
SOP
DUA
7
25
RoHS &
Non-Green
NIPDAU
Level-3-260C-168 HR
-40 to 100
DCP012405BP-U
DCP012415DBP
ACTIVE
PDIP
NVA
7
25
RoHS &
Non-Green
NIPDAU
N / A for Pkg Type
-40 to 100
DCP012415DBP
Addendum-Page 2
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
13-Aug-2021
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
(3)
Device Marking
(4/5)
(6)
DCP012415DBP-U
ACTIVE
SOP
DUA
7
25
RoHS &
Non-Green
NIPDAU
Level-3-260C-168 HR
-40 to 100
DCP012415DBP-U
DCP012415DBP-U/700
ACTIVE
SOP
DUA
7
700
RoHS &
Non-Green
NIPDAU
Level-3-260C-168 HR
-40 to 100
DCP012415DBP-U
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of