LM385BXZ/NOPB

LM185-ADJ, LM285-ADJ, LM385-ADJ www.ti.com SNVS741F – FEBRUARY 2000 – REVISED APRIL 2013 LM185/LM285/LM385 Adjustable Micropower Voltage References Check for Samples: LM185-ADJ, LM285-ADJ, LM385-ADJ FEATURES 1 • • • • • 2 Adjustable from 1.24V to 5.30V Operating Current of 10μA to 20mA 1% and 2% Initial Tolerance 1Ω Dynamic Impedance Low Temperature Coefficient DESCRIPTION The LM185/LM285/LM385 are micropower 3-terminal adjustable band-gap voltage reference diodes. Operating from 1.24 to 5.3V and over a 10μA to 20mA current range, they feature exceptionally low dynamic impedance and good temperature stability. On-chip trimming is used to provide tight voltage tolerance. Since the LM185 band-gap reference uses only transistors and resistors, low noise and good long-term stability result. Careful design of the LM185 has made the device tolerant of capacitive loading, making it easy to use in almost any reference application. The wide dynamic operating range allows its use with widely varying supplies with excellent regulation. The extremely low power drain of the LM185 makes it useful for micropower circuitry. This voltage reference can be used to make portable meters, regulators or general purpose analog circuitry with battery life approaching shelf life. Further, the wide operating current allows it to replace older references with a tighter tolerance part. The LM185 is rated for operation over a −55°C to 125°C temperature range, while the LM285 is rated −40°C to 85°C and the LM385 0°C to 70°C. The LM185 is available in a hermetic TO package and a LCCC package, while the LM285/LM385 are available in a low-cost TO-92 package, as well as SOIC. Connection Diagram Figure 1. TO-92 Package Bottom View Figure 2. TO Package Bottom View Figure 3. SOIC Package Top View Figure 4. 20-LCCC Top View 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2000–2013, Texas Instruments Incorporated LM185-ADJ, LM285-ADJ, LM385-ADJ SNVS741F – FEBRUARY 2000 – REVISED APRIL 2013 www.ti.com Block Diagram Typical Applications Figure 5. 1.2V Reference Figure 6. 5.0V Reference These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. 2 Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated Product Folder Links: LM185-ADJ LM285-ADJ LM385-ADJ LM185-ADJ, LM285-ADJ, LM385-ADJ www.ti.com SNVS741F – FEBRUARY 2000 – REVISED APRIL 2013 Absolute Maximum Ratings (1) (2) (3) Reverse Current 30mA Forward Current 10mA Operating Temperature Range (4) LM185 Series −55°C to 125°C LM285 Series −40°C to 85°C LM385 Series 0°C to 70°C (5) 2kV Storage Temperature −55°C to 150°C ESD Susceptibility Soldering Information TO-92 Package (10 sec.) 260°C TO Package (10 sec.) 300°C SOIC Package Vapor Phase (60 sec.) 215°C Infrared (15 sec.) 220°C See An-450 “Surface Mounting Methods and Their Effect on Product Reliability” for other methods of soldering surface mount devices. (1) (2) (3) (4) (5) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional. For specifications and test conditions, see the Electrical Characteristics. The specifications apply only for the test conditions listed. Refer to RETS185H for military specifications. If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications. For elevated temperature operation, see Table 1 and Thermal Characteristics. The human body model is a 100 pF capacitor discharged through a 1.5 kΩ resistor into each pin. Table 1. TJ(max) for Elevated Temperature Operation DEVICE TJ(max) (°C) LM185 150 LM285 125 LM385 100 Thermal Characteristics Over operating free-air temperature range (unless otherwise noted) Thermal Resistance TO-92 180°C/W (0.4″ leads) θJA (Junction to Ambient) 170°C/W (0.125″ leads) θJC (Junction to Case) N/A Copyright © 2000–2013, Texas Instruments Incorporated TO-46 SOIC 440°C/W 165°C/W 80°C/W N/A Submit Documentation Feedback Product Folder Links: LM185-ADJ LM285-ADJ LM385-ADJ 3 LM185-ADJ, LM285-ADJ, LM385-ADJ SNVS741F – FEBRUARY 2000 – REVISED APRIL 2013 www.ti.com Electrical Characteristics (1) LM185, LM285 Parameter Conditions Typ LM385 LM185BX, LM185BY LM185B, LM285BX, LM285BY LM285 LM385 LM385BX, LM385BY Tested Design Tested Design Limit Limit Limit Limit (2) Reference Voltage IR = 100μA 1.240 (3) 1.252 Units (Limit) Typ (2) (3) 1.265 1.270 1.215 1.205 Tested Design Tested Design Limit Limit Limit Limit 1.240 (2) (3) (2) (3) 1.252 1.255 1.265 1.270 V (max) 1.228 1.215 1.215 1.205 V (min) mV (max) 1.255 1.228 1.215 Reference Voltage Change with Current IMIN< IR < 1mA Dynamic Output Impedance IR = 100μA, f = 100Hz Reference Voltage Change with Output Voltage 1mA < IR < 20mA IAC = 0.1 IR 0.2 1 1.5 1 1.5 0.2 1 1.5 1 1.5 4 10 20 10 20 5 15 25 15 25 VOUT = VREF 0.3 0.4 VOUT = 5.3V 0.7 1 Ω IR = 100μA Feedback Current 1 3 6 3 6 2 5 10 5 10 mV (max) 13 20 25 20 25 16 30 35 30 35 nA (max) μA (max) Minimum Operating Current (see curve) VOUT = VREF 6 9 10 9 10 7 11 13 11 13 VOUT = 5.3V 30 45 50 45 50 35 55 60 55 60 Output Wideband Noise IR = 100μA, 10Hz < f < 10kHz VOUT = VREF 50 VOUT = 5.3V Average IR = 100μA Temperature Coefficient (4) μVrms 170 170 X Suffix 30 30 Y Suffix 50 50 All Others Long Term Stability 50 IR = 100μA, T = 1000 Hr, 150 20 150 150 20 150 ppm/°c (max) ppm TA = 25°C ± 0.1°C (1) (2) (3) (4) 4 Parameters identified with boldface type apply at temperature extremes. All other numbers apply at TA = TJ = 25°C. Unless otherwise specified, all parameters apply for VREF < VOUT < 5.3V. Production tested. Not production tested. These limits are not to be used to calculate average outgoing quality levels. The average temperature coefficient is defined as the maximum deviation of reference voltage at all measured temperatures from TMIN to TMAX, divided by TMAX − TMIN. The measured temperatures are −55, −40, 0, 25, 70, 85, 125°C. Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated Product Folder Links: LM185-ADJ LM285-ADJ LM385-ADJ LM185-ADJ, LM285-ADJ, LM385-ADJ www.ti.com SNVS741F – FEBRUARY 2000 – REVISED APRIL 2013 Typical Performance Characteristics Temperature Drift of 3 Representative Units Feedback Current Figure 7. Figure 8. Minimum Operating Current Reverse Characteristics Figure 9. Figure 10. Reverse Characteristics Forward Characteristics Figure 11. Figure 12. Copyright © 2000–2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: LM185-ADJ LM285-ADJ LM385-ADJ 5 LM185-ADJ, LM285-ADJ, LM385-ADJ SNVS741F – FEBRUARY 2000 – REVISED APRIL 2013 www.ti.com Typical Performance Characteristics (continued) Output Noise Voltage Dynamic Output Impedance Figure 13. Figure 14. Response Time Figure 15. Temperature Coefficient Typical LM185 (left), LM285 (center), LM385 (right) Figure 16. 6 Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated Product Folder Links: LM185-ADJ LM285-ADJ LM385-ADJ LM185-ADJ, LM285-ADJ, LM385-ADJ www.ti.com SNVS741F – FEBRUARY 2000 – REVISED APRIL 2013 TYPICAL APPLICATIONS Figure 17. Precision 10V Reference Figure 18. Low AC Noise Reference Figure 19. 25V Low Current Shunt Regulator Figure 20. 200 mA Shunt Regulator Copyright © 2000–2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: LM185-ADJ LM285-ADJ LM385-ADJ 7 LM185-ADJ, LM285-ADJ, LM385-ADJ SNVS741F – FEBRUARY 2000 – REVISED APRIL 2013 8 www.ti.com Figure 21. Series-Shunt 20 mA Regulator Figure 22. High Efficiency Low Power Regulator Figure 23. Voltage Level Detector Figure 24. Voltage Level Detector Figure 25. Fast Positive Clamp 2.4V + ΔVD1 Figure 26. Bidirectional Clamp ±2.4V Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated Product Folder Links: LM185-ADJ LM285-ADJ LM385-ADJ LM185-ADJ, LM285-ADJ, LM385-ADJ www.ti.com SNVS741F – FEBRUARY 2000 – REVISED APRIL 2013 Figure 27. Bidirectional Adjustable Clamp ±1.8V to ±2.4V Figure 28. Bidirectional Adjustable Clamp ±2.4V to ±6V Figure 29. Simple Floating Current Detector Figure 30. Current Source Copyright © 2000–2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: LM185-ADJ LM285-ADJ LM385-ADJ 9 LM185-ADJ, LM285-ADJ, LM385-ADJ SNVS741F – FEBRUARY 2000 – REVISED APRIL 2013 www.ti.com *D1 can be any LED, VF=1.5V to 2.2V at 3 mA. D1 may act as an indicator. D1 will be on if ITHRESHOLD falls below the threshold current, except with I=O. Figure 31. Precision Floating Current Detector Figure 32. Centigrade Thermometer, 10mV/°C Figure 33. Freezer Alarm 10 Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated Product Folder Links: LM185-ADJ LM285-ADJ LM385-ADJ LM185-ADJ, LM285-ADJ, LM385-ADJ www.ti.com SNVS741F – FEBRUARY 2000 – REVISED APRIL 2013 Schematic Diagram Copyright © 2000–2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: LM185-ADJ LM285-ADJ LM385-ADJ 11 LM185-ADJ, LM285-ADJ, LM385-ADJ SNVS741F – FEBRUARY 2000 – REVISED APRIL 2013 www.ti.com REVISION HISTORY Changes from Revision E (April 2013) to Revision F • 12 Page Changed layout of National Data Sheet to TI format .......................................................................................................... 11 Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated Product Folder Links: LM185-ADJ LM285-ADJ LM385-ADJ PACKAGE OPTION ADDENDUM www.ti.com 4-Aug-2022 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) LM185BH ACTIVE TO NDV 3 1000 Non-RoHS & Non-Green Call TI Call TI -55 to 125 ( LM185BH, LM185BH ) Samples LM185BH/NOPB ACTIVE TO NDV 3 1000 RoHS & Green Call TI Level-1-NA-UNLIM -55 to 125 ( LM185BH, LM185BH ) Samples LM285BXZ/NOPB ACTIVE TO-92 LP 3 1800 RoHS & Green Call TI N / A for Pkg Type -40 to 85 LM285 BXZ Samples LM285BYM/NOPB ACTIVE SOIC D 8 95 RoHS & Green SN Level-1-260C-UNLIM -40 to 85 LM285 BYM Samples LM285BYMX/NOPB ACTIVE SOIC D 8 2500 RoHS & Green SN Level-1-260C-UNLIM -40 to 85 LM285 BYM Samples LM285BYZ/NOPB ACTIVE TO-92 LP 3 1800 RoHS & Green Call TI N / A for Pkg Type -40 to 85 LM285 BYZ Samples LM285M/NOPB ACTIVE SOIC D 8 95 RoHS & Green SN Level-1-260C-UNLIM -40 to 85 LM285 M Samples LM285MX/NOPB ACTIVE SOIC D 8 2500 RoHS & Green SN Level-1-260C-UNLIM -40 to 85 LM285 M Samples LM285Z/NOPB ACTIVE TO-92 LP 3 1800 RoHS & Green Call TI N / A for Pkg Type -40 to 85 LM285 Z Samples LM385BM/NOPB ACTIVE SOIC D 8 95 RoHS & Green SN Level-1-260C-UNLIM 0 to 70 LM385 BM Samples LM385BMX/NOPB ACTIVE SOIC D 8 2500 RoHS & Green SN Level-1-260C-UNLIM 0 to 70 LM385 BM Samples LM385BXZ/NOPB ACTIVE TO-92 LP 3 1800 RoHS & Green Call TI N / A for Pkg Type 0 to 70 LM385 BXZ Samples LM385BYZ/NOPB ACTIVE TO-92 LP 3 1800 RoHS & Green Call TI N / A for Pkg Type 0 to 70 LM385 BYZ Samples LM385BZ/NOPB ACTIVE TO-92 LP 3 1800 RoHS & Green Call TI N / A for Pkg Type 0 to 70 LM385 BZ Samples LM385M NRND SOIC D 8 95 Non-RoHS & Green Call TI Level-1-235C-UNLIM 0 to 70 LM385 M LM385M/NOPB ACTIVE SOIC D 8 95 RoHS & Green SN Level-1-260C-UNLIM 0 to 70 LM385 M Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com 4-Aug-2022 Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) LM385MX NRND SOIC D 8 2500 Non-RoHS & Green Call TI Level-1-235C-UNLIM 0 to 70 LM385 M LM385MX/NOPB ACTIVE SOIC D 8 2500 RoHS & Green SN Level-1-260C-UNLIM 0 to 70 LM385 M Samples LM385Z/NOPB ACTIVE TO-92 LP 3 1800 RoHS & Green Call TI N / A for Pkg Type 0 to 70 LM385 Z Samples (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of