Product
Folder
Order
Now
Support &
Community
Tools &
Software
Technical
Documents
LMZ30602
SNVS997B – JULY 2013 – REVISED APRIL 2018
LMZ30602 2-A Power Module With 2.95-V to 6-V Input in QFN Package
1 Features
3 Description
•
The LMZ30602 power module is an easy-to-use
integrated power solution that combines a 2-A DC/DC
converter with power MOSFETs, a shielded inductor,
and passives into a low profile, QFN package. This
total power solution requires as few as 3 external
components and eliminates the loop compensation
and magnetics part selection process.
1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Complete Integrated Power Solution Allows
Small Footprint, Low-Profile Design
9 mm × 11 mm × 2.8 mm package
- Pin Compatible with LMZ30604 and LMZ30606
Efficiencies Up To 96%
Wide-Output Voltage Adjust
0.8 V to 3.6 V, with ±1% Reference Accuracy
Adjustable Switching Frequency
(500 kHz to 2 MHz)
Synchronizes to an External Clock
Adjustable Slow-Start
Output Voltage Sequencing / Tracking
Power Good Output
Programmable Undervoltage Lockout (UVLO)
Output Overcurrent Protection
Over Temperature Protection
Operating Temperature Range: –40°C to 85°C
Enhanced Thermal Performance: 12°C/W
Meets EN55022 Class B Emissions
- Integrated Shielded Inductor
Create a Custom Design Using the LMZ30602
With the WEBENCH® Power Designer
2 Applications
•
•
•
•
•
The 9×11×2.8 mm QFN package is easy to solder
onto a printed circuit board and allows a compact
point-of-load design with greater than 90% efficiency
and excellent power dissipation with a thermal
impedance of 12°C/W junction to ambient. The
device delivers the full 2-A rated output current at
85°C ambient temperature without airflow.
The LMZ30602 offers the flexibility and the featureset of a discrete point-of-load design and is ideal for
powering performance DSPs and FPGAs. Advanced
packaging technology afford a robust and reliable
power solution compatible with standard QFN
mounting and testing techniques.
Simplified Application
LMZ30602
VIN
VIN
PWRGD
VOUT
CIN
Broadband & Communications Infrastructure
Automated Test and Medical Equipment
Compact PCI / PCI Express / PXI Express
DSP and FPGA Point of Load Applications
High Density Distributed Power Systems
VOUT
COUT
SENSE+
RT/CLK
INH/UVLO
SS/TR
VADJ
100
STSEL
95
PGND AGND
Efficiency (%)
90
RSET
85
80
75
70
VIN = 5 V, VOUT = 3.3 V, fSW = 1.5 MHz
VIN = 3.3 V, VOUT = 1.8 V, fSW = 1 MHz
65
60
0
0.5
1
Output Current (A)
1.5
2
G000
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
LMZ30602
SNVS997B – JULY 2013 – REVISED APRIL 2018
www.ti.com
Table 1. Ordering Information
For the most current package and ordering information, see the Package Option Addendum at the end of this datasheet, or see
the TI website at www.ti.com.
4 Specifications
4.1
Absolute Maximum Ratings
over operating temperature range (unless otherwise noted) (1)
VALUE
Input Voltage
MAX
VIN, PWRGD
–0.3
7
V
INH/UVLO, RT/CLK
–0.3
3.3
V
SS/TR, STSEL, VADJ
–0.3
3
V
SENSE+
-0.3
VOUT
V
–0.6
7
V
–2
7
V
-0.6
VIN
V
–0.2
0.2
V
VADJ rating must also be met
PH
Output Voltage
PH 10ns Transient
VOUT
VDIFF (GND to exposed thermal pad)
RT/CLK, INH/UVLO
Source Current
Sink Current
UNIT
MIN
±100
µA
PH
Current Limit
A
PH
Current Limit
A
SS/TR
PWRGD
±100
µA
10
mA
Operating Junction Temperature
–40
125 (2)
°C
Storage Temperature
–65
150
°C
(4)
°C
Peak Reflow Case Temperature
(3)
250
Maximum Number of Reflows Allowed (3)
3 (4)
Mechanical Shock
Mil-STD-883D, Method 2002.3, 1 msec, 1/2 sine, mounted
Mechanical Vibration
Mil-STD-883D, Method 2007.2, 20-2000Hz
(1)
(2)
(3)
(4)
1500
20
G
Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
See the temperature derating curves in the Typical Characteristics section for thermal information.
For soldering specifications, refer to the Soldering Requirements for BQFN Packages application note.
Devices with a date code prior to week 14 2018 (1814) have a peak reflow case temperature of 240°C with a maximum of one reflow.
4.2 Thermal Information
LMZ30602
THERMAL METRIC (1)
RKG39
UNIT
39 PINS
θJA
Junction-to-ambient thermal resistance (2)
12
ψJT
Junction-to-top characterization parameter (3)
2.2
ψJB
(1)
(2)
(3)
(4)
2
Junction-to-board characterization parameter
(4)
°C/W
9.7
For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.
The junction-to-ambient thermal resistance, θJA, applies to devices soldered directly to a 100 mm x 100 mm double-sided PCB with 1 oz.
copper and natural convection cooling. Additional airflow reduces θJA.
The junction-to-top characterization parameter, ψJT, estimates the junction temperature, TJ, of a device in a real system, using a
procedure described in JESD51-2A (sections 6 and 7). TJ = ψJT * Pdis + TT; where Pdis is the power dissipated in the device and TT is
the temperature of the top of the device.
The junction-to-board characterization parameter, ψJB, estimates the junction temperature, TJ, of a device in a real system, using a
procedure described in JESD51-2A (sections 6 and 7). TJ = ψJB * Pdis + TB; where Pdis is the power dissipated in the device and TB is
the temperature of the board 1mm from the device.
Submit Documentation Feedback
Copyright © 2013–2018, Texas Instruments Incorporated
Product Folder Links: LMZ30602
LMZ30602
www.ti.com
SNVS997B – JULY 2013 – REVISED APRIL 2018
4.3 Electrical Characteristics
Over -40°C to 85°C free-air temperature, VIN = 3.3 V, VOUT = 1.8 V, IOUT = 2A,
CIN1 = 47 µF ceramic, CIN2 = 220 µF poly-tantalum, COUT1 = 47 µF ceramic, COUT2 = 100 µF poly-tantalum (unless otherwise
noted)
PARAMETER
TEST CONDITIONS
IOUT
Output current
TA = 85°C, natural convection
VIN
Input voltage range
Over IOUT range
UVLO
VIN Undervoltage lockout
VOUT(adj)
VOUT
3.05
Over IOUT range
0.8
TA = 25°C, IOUT = 0A
VINH-H
II(stby)
-40°C ≤ TA ≤ +85°C, IOUT = 0A
±0.3%
Over VIN range, TA = 25°C, IOUT = 0A
±0.1%
Load regulation
Over IOUT range, TA = 25°C
±0.1%
Total output voltage variation
Includes set-point, line, load, and temperature variation
VOUT = 3.3V, fSW = 1.5 MHz
95%
VOUT = 2.5V, fSW = 1.5 MHz
93%
VOUT = 1.8V, fSW = 1 MHz
92%
VOUT = 1.5V, fSW = 1 MHz
91%
VOUT = 1.2V, fSW =750 kHz
90%
VOUT = 1.0V, fSW = 650 kHz
88%
VOUT = 0.8V, fSW = 650 kHz
87%
VOUT = 1.8V, fSW = 1 MHz
93%
VOUT = 1.5V, fSW = 1 MHz
92%
VOUT = 1.2V, fSW = 750 kHz
91%
VOUT = 1.0V, fSW = 650 kHz
89%
VOUT = 0.8V, fSW = 650 kHz
87%
Inhibit Control
Input standby current
1.0 A/µs load step from 0.5A to 1.5A
±1.5%
(2)
A
µs
VOUT
over/undershoot
45
1.25
–0.3
INH pin to AGND
VOUT falling
I(PWRGD) = 0.33 mA
Over VIN and IOUT ranges, RT/CLK pin OPEN
fCLK
Synchronization frequency
VCLK-H
CLK High-Level Threshold
VCLK-L
CLK Low-Level Threshold
CLK Control
mV
Open
(3)
1.0
70
PWRGD Low Voltage
mVPP
80
Inhibit High Voltage
Switching frequency
V
Recovery time
Inhibit Low Voltage
fSW
Good
93%
Fault
107%
Fault
91%
Good
105%
100
Thermal shutdown
Thermal shutdown hysteresis
V
µA
0.3
V
600
kHz
500
2000
kHz
2.2
3.3
-0.3
0.4
400
500
75 (4)
CLK_PW CLK Pulse Width
(4)
(2)
9
PWRGD Thresholds
Thermal Shutdown
±1.0%
V
3.5
VOUT rising
Power
Good
3.6
Line regulation
20 MHz bandwith
3.135
2.75
Temperature variation
Overcurrent threshold
VINH-L
(3)
A
V
Set-point voltage tolerance
Transient response
(1)
(2)
2
Output voltage adjust range
Output voltage ripple
UNIT
6
2.5
VIN = 3.3V
IO = 1 A
MAX
0
VIN = decreasing
Efficiency
ILIM
TYP
2.95 (1)
VIN = increasing
VIN = 5 V
IO = 1 A
η
MIN
V
V
ns
175
°C
15
°C
The minimum VIN depends on VOUT and the switching frequency. Please refer to Table 9 for operating limits.
The stated limit of the set-point voltage tolerance includes the tolerance of both the internal voltage reference and the internal
adjustment resistor. The overall output voltage tolerance will be affected by the tolerance of the external RSET resistor.
This control pin has an internal pullup. Do not place an external pull-up resistor on this pin. If this pin is left open circuit, the device
operates when input power is applied. A small low-leakage MOSFET is recommended for control. See the application section for further
guidance.
The maximum synchronization clock pulse width is dependant on VIN, VOUT, and the synchronization frequency. See the
Synchronization (CLK) section for more information.
Submit Documentation Feedback
Copyright © 2013–2018, Texas Instruments Incorporated
Product Folder Links: LMZ30602
3
LMZ30602
SNVS997B – JULY 2013 – REVISED APRIL 2018
www.ti.com
Electrical Characteristics (continued)
Over -40°C to 85°C free-air temperature, VIN = 3.3 V, VOUT = 1.8 V, IOUT = 2A,
CIN1 = 47 µF ceramic, CIN2 = 220 µF poly-tantalum, COUT1 = 47 µF ceramic, COUT2 = 100 µF poly-tantalum (unless otherwise
noted)
PARAMETER
CIN
TEST CONDITIONS
MIN
Ceramic
External input capacitance
External output capacitance
MAX
(6)
150
650 (7)
(6)
1000 (7)
100
Equivalent series resistance (ESR)
(5)
(6)
(7)
UNIT
µF
220 (5)
47
Non-ceramic
TYP
(5)
Non-ceramic
Ceramic
COUT
47
25
µF
mΩ
A minimum of 47µF of ceramic capacitance is required across the input for proper operation. Locate the capacitor close to the device.
An additional 220µF of bulk capacitance is recommended. See Table 7 for more details.
The amount of required output capacitance varies depending on the output voltage (see Table 5 ). The amount of required capacitance
must include at least 47µF of ceramic capacitance. Locate the capacitance close to the device. Adding additional capacitance close to
the load improves the response of the regulator to load transients. See Table 5 and Table 7 for more details.
When using both ceramic and non-ceramic output capacitance, the combined maximum must not exceed 1200µF.
4.4 Package Specifications
LMZ30602
UNIT
Weight
Flammability
MTBF Calculated reliability
4
0.85 grams
Meets UL 94 V-O
Per Bellcore TR-332, 50% stress, TA = 40°C, ground benign
Submit Documentation Feedback
38.5 MHrs
Copyright © 2013–2018, Texas Instruments Incorporated
Product Folder Links: LMZ30602
LMZ30602
www.ti.com
SNVS997B – JULY 2013 – REVISED APRIL 2018
5 Device Information
FUNCTIONAL BLOCK DIAGRAM
Thermal Shutdown
PWRGD
PWRGD
Logic
INH/UVLO
Shutdown
Logic
VIN
UVLO
VSENSE+
VIN
VADJ
PH
+
+
SS/TR
VREF
Power
Stage
and
Control
Logic
Comp
STSEL
VOUT
RT/CLK
PGND
OSC w/PLL
OCP
AGND
LMZ30602
Submit Documentation Feedback
Copyright © 2013–2018, Texas Instruments Incorporated
Product Folder Links: LMZ30602
5
LMZ30602
SNVS997B – JULY 2013 – REVISED APRIL 2018
www.ti.com
Table 2. PIN DESCRIPTIONS
TERMINAL
NAME
DESCRIPTION
NO.
1
5
AGND
29
33
Zero VDC reference for the analog control circuitry. These pins should be connected directly to the PCB
analog ground plane. Not all pins are connected together internally. All pins must be connected together
externally with a copper plane or pour directly under the module. Connect the AGND copper area to the
PGND copper area at a single point; directly at the pin 37 PowerPAD using multiple vias. See the
recommended layout in Figure 36.
34
PowerPAD
(PGND)
37
This pad provides both an electrical and thermal connection to the PCB. This pad should be connected
directly to the PCB power ground plane using multiple vias for good electrical and thermal performance. The
same vias should also be used to connect to the PCB analog ground plane. See the recommended layout in
Figure 36.
2
3
DNC
15
Do Not Connect. Do not connect these pins to AGND, to another DNC pin, or to any other voltage. These
pins are connected to internal circuitry. Each pin must be soldered to an isolated pad.
16
26
INH/UVLO
28
Inhibit and UVLO adjust pin. Use an open drain or open collector output logic to control the INH function. A
resistor between this pin and AGND adjusts the UVLO voltage.
17
18
19
20
21
PH
22
Phase switch node. These pins should be connected by a small copper island under the device for thermal
relief. Do not connect any external component to this pin or tie it to a pin of another function.
23
24
25
39
PWRGD
27
Power good fault pin. Asserts low if the output voltage is out of tolerance. A pull-up resistor is required.
RT/CLK
4
This pin automatically selects between RT mode and CLK mode. An external timing resistor adjusts the
switching frequency of the device. In CLK mode, the device synchronizes to an external clock.
SENSE+
36
Remote sense connection. Connect this pin to VOUT at the load for improved regulation. This pin must be
connected to VOUT at the load, or at the module pins.
SS/TR
6
Slow-start and tracking pin. Connecting an external capacitor to this pin adjusts the output voltage rise time.
A voltage applied to this pin allows for tracking and sequencing control.
STSEL
7
Slow-start or track feature select. Connect this pin to AGND to enable the internal SS capacitor with a SS
interval of approximately 1.1 ms. Leave this pin open to enable the TR feature.
VADJ
35
Connecting a resistor between this pin and AGND sets the output voltage above the 0.8V default voltage.
30
VIN
31
The positive input voltage power pins, which are referenced to PGND. Connect external input capacitance
between these pins and the PGND plane, close to the device.
32
8
9
10
VOUT
11
12
Output voltage. Connect output capacitors between these pins and the PGND plane, close to the device.
13
14
38
6
Submit Documentation Feedback
Copyright © 2013–2018, Texas Instruments Incorporated
Product Folder Links: LMZ30602
LMZ30602
www.ti.com
SNVS997B – JULY 2013 – REVISED APRIL 2018
1
DNC
2
DNC
3
RT/CLK
4
AGND
VIN
VIN
VIN
35 34 33 32
AGND
36
AGND
VADJ
AGND
SENSE+
RKG PACKAGE
39 PINS
(TOP VIEW)
31 30
29
AGND
28
INH/UVLO
27
PWRGD
26
DNC
5
25
PH
SS/TR
6
24
PH
STSEL
7
23
PH
VOUT
8
22
PH
VOUT
9
21
PH
VOUT
10
20
PH
VOUT
11
37
PGND
PH
39
17 18
19
PH
PH
DNC
DNC
VOUT
VOUT
VOUT
12 13 14 15 16
PH
VOUT
38
Submit Documentation Feedback
Copyright © 2013–2018, Texas Instruments Incorporated
Product Folder Links: LMZ30602
7
LMZ30602
SNVS997B – JULY 2013 – REVISED APRIL 2018
www.ti.com
6 Typical Characteristics (VIN = 5 V)
The electrical characteristic data has been developed from actual products tested at 25°C. This data is considered typical for
the converter. Applies to Figure 1, Figure 2, and Figure 3. The temperature derating curves represent the conditions at which
internal components are at or below the manufacturer's maximum operating temperatures. Derating limits apply to devices
soldered directly to a 100 mm × 100 mm double-sided PCB with 1 oz. copper. Applies to Figure 4.
14
100
Output Voltage Ripple (mV)
95
Efficiency (%)
90
85
80
75
VOUT = 3.3 V, fSW = 1.5 MHz
VOUT = 2.5 V, fSW = 1.5 MHz
VOUT = 1.8 V, fSW = 1 MHz
VOUT = 1.2 V, fSW = 750 kHz
VOUT = 0.8 V, fSW = 650 kHz
70
65
60
0
0.5
1
Output Current (A)
1.5
12
10
6
2
VOUT = 3.3 V, fSW = 1.5 MHz
VOUT = 2.5 V, fSW = 1.5 MHz
VOUT = 1.8 V, fSW = 1 MHz
VOUT = 1.2 V, fSW = 750 kHz
VOUT = 0.8 V, fSW = 650 kHz
8
0
Figure 1. Efficiency vs. Output Current
1
Output Current (A)
1.5
2
G000
Figure 2. Voltage Ripple vs. Output Current
0.5
90
VOUT = 3.3 V, fSW = 1.5 MHz
VOUT = 2.5 V, fSW = 1.5 MHz
VOUT = 1.8 V, fSW = 1 MHz
VOUT = 1.2 V, fSW = 750 kHz
VOUT = 0.8 V, fSW = 650 kHz
0.4
80
Ambient Temperature (°C)
Power Dissipation (W)
0.5
G000
0.3
0.2
0.1
70
60
50
40
30
All Output Voltages
0
0.5
1
Output Current (A)
1.5
2
20
0
120
30
90
20
60
10
30
0
0
−10
−30
−20
−40
1000
1.5
2
G000
Figure 4. Safe Operating Area
40
−30
Natural Convection
1
Output Current (A)
G000
Figure 3. Power Dissipation vs. Output Current
Gain (dB)
0.5
Phase (°)
0
−60
Gain
Phase
−90
10000
Frequency (Hz)
100000
−120
500000
G000
Figure 5. VOUT= 1.8 V, IOUT= 2 A, COUT1= 47 µF ceramic, COUT2= 100 µF POSCAP, fSW= 1 MHz
8
Submit Documentation Feedback
Copyright © 2013–2018, Texas Instruments Incorporated
Product Folder Links: LMZ30602
LMZ30602
www.ti.com
SNVS997B – JULY 2013 – REVISED APRIL 2018
7 Typical Characteristics (VIN = 3.3 V)
The electrical characteristic data has been developed from actual products tested at 25°C. This data is considered typical for
the converter. Applies to Figure 6, Figure 7, and Figure 8. The temperature derating curves represent the conditions at which
internal components are at or below the manufacturer's maximum operating temperatures. Derating limits apply to devices
soldered directly to a 100 mm × 100 mm double-sided PCB with 1 oz. copper. Applies to Figure 9.
12
100
Output Voltage Ripple (mV)
95
Efficiency (%)
90
85
80
75
70
VOUT = 1.8 V, fSW = 1 MHz
VOUT = 1.2 V, fSW = 750 kHz
VOUT = 0.8 V, fSW = 650 kHz
65
60
0
0.5
1
Output Current (A)
1.5
10
8
6
4
2
VOUT = 1.8 V, fSW = 1 MHz
VOUT = 1.2 V, fSW = 750 kHz
VOUT = 0.8 V, fSW = 650 kHz
0
Figure 6. Efficiency vs. Output Current
1
Output Current (A)
1.5
2
G000
Figure 7. Voltage Ripple vs. Output Current
0.5
90
VOUT = 1.8 V, fSW = 1 MHz
VOUT = 1.2 V, fSW = 750 kHz
VOUT = 0.8 V, fSW = 650 kHz
0.4
80
Ambient Temperature (°C)
Power Dissipation (W)
0.5
G000
0.3
0.2
0.1
70
60
50
40
30
All Output Voltages
0
0.5
1
Output Current (A)
1.5
2
20
0
120
30
90
20
60
10
30
0
0
−10
−30
−20
−40
1000
1.5
2
G000
Figure 9. Safe Operating Area
40
−30
Natural Convection
1
Output Current (A)
G000
Figure 8. Power Dissipation vs. Output Current
Gain (dB)
0.5
Phase (°)
0
−60
Gain
Phase
−90
10000
Frequency (Hz)
100000
−120
500000
G000
Figure 10. VOUT= 1.8 V, IOUT= 2 A, COUT1= 47 µF ceramic, COUT2= 100 µF POSCAP, fSW= 1 MHz
Submit Documentation Feedback
Copyright © 2013–2018, Texas Instruments Incorporated
Product Folder Links: LMZ30602
9
LMZ30602
SNVS997B – JULY 2013 – REVISED APRIL 2018
www.ti.com
8 Application Information
8.1 Adjusting the Output Voltage
The VADJ control sets the output voltage of the LMZ30602. The output voltage adjustment range is from 0.8V to
3.6V. The adjustment method requires the addition of RSET, which sets the output voltage, the connection of
SENSE+ to VOUT, and in some cases RRT which sets the switching frequency. The RSET resistor must be
connected directly between the VADJ (pin 35) and AGND (pin 33 & 34). The SENSE+ pin (pin 36) must be
connected to VOUT either at the load for improved regulation or at VOUT of the module. The RRT resistor must
be connected directly between the RT/CLK (pin 4) and AGND (pins 33 & 34).
Table 3 gives the standard external RSET resistor for a number of common bus voltages, along with the
recommended RRT resistor for that output voltage.
Table 3. Standard RSET Resistor Values for Common Output Voltages
RESISTORS
OUTPUT VOLTAGE VOUT (V)
0.8
1.2
1.5
1.8
2.5
3.3
RSET (kΩ)
open
2.87
1.65
1.15
0.673
0.459
RRT (kΩ)
1200
715
348
348
174
174
For other output voltages, the value of the required resistor can either be calculated using the following formula,
or simply selected from the range of values given in Table 4.
1.43
RSET =
(kW )
æ æ VOUT ö ö
çç
÷ - 1÷
è è 0.803 ø ø
(1)
Table 4. Standard RSET Resistor Values
10
VOUT (V)
RSET (kΩ)
RRT(kΩ)
fSW(kHz)
VOUT (V)
RSET (kΩ)
RRT(kΩ)
fSW(kHz)
0.8
open
1200
650
2.3
0.768
174
1500
0.9
11.8
1200
650
2.4
0.715
174
1500
1.0
5.83
1200
650
2.5
0.673
174
1500
1.1
3.83
1200
650
2.6
0.634
174
1500
1.2
2.87
715
750
2.7
0.604
174
1500
1.3
2.32
715
750
2.8
0.576
174
1500
1.4
1.91
715
750
2.9
0.549
174
1500
1.5
1.65
348
1000
3.0
0.523
174
1500
1.6
1.43
348
1000
3.1
0.499
174
1500
1.7
1.27
348
1000
3.2
0.475
174
1500
1.8
1.15
348
1000
3.3
0.459
174
1500
1.9
1.05
348
1000
3.4
0.442
174
1500
2.0
0.953
174
1500
3.5
0.422
174
1500
2.1
0.845
174
1500
3.6
0.412
174
1500
2.2
0.825
174
1500
Submit Documentation Feedback
Copyright © 2013–2018, Texas Instruments Incorporated
Product Folder Links: LMZ30602
LMZ30602
www.ti.com
SNVS997B – JULY 2013 – REVISED APRIL 2018
8.2 Capacitor Recommendations for the LMZ30602 Power Supply
8.2.1 Capacitor Technologies
8.2.1.1 Electrolytic, Polymer-Electrolytic Capacitors
When using electrolytic capacitors, high-quality, computer-grade electrolytic capacitors are recommended.
Polymer-electrolytic type capacitors are recommended for applications where the ambient operating temperature
is less than 0°C. The Sanyo OS-CON capacitor series is suggested due to the lower ESR, higher rated surge,
power dissipation, ripple current capability, and small package size. Aluminum electrolytic capacitors provide
adequate decoupling over the frequency range of 2 kHz to 150 kHz, and are suitable when ambient temperatures
are above 0°C.
8.2.1.2 Ceramic Capacitors
The performance of aluminum electrolytic capacitors is less effective than ceramic capacitors above 150 kHz.
Multilayer ceramic capacitors have a low ESR and a resonant frequency higher than the bandwidth of the
regulator. They can be used to reduce the reflected ripple current at the input as well as improve the transient
response of the output.
8.2.1.3 Tantalum, Polymer-Tantalum Capacitors
Polymer-tantalum type capacitors are recommended for applications where the ambient operating temperature is
less than 0°C. The Sanyo POSCAP series and Kemet T530 capacitor series are recommended rather than many
other tantalum types due to their lower ESR, higher rated surge, power dissipation, ripple current capability, and
small package size. Tantalum capacitors that have no stated ESR or surge current rating are not recommended
for power applications.
8.2.2 Input Capacitor
The LMZ30602 requires a minimum input capacitance of 47 μF of ceramic capacitance. An additional 220 μF
polymer-tantalum capacitor is recommended for applications with transient load requirements. The combined
ripple current rating of the input capacitors must be at least 1000 mArms. Table 7 includes a preferred list of
capacitors by vendor. For applications where the ambient operating temperature is less than 0°C, an additional
1 μF, X5R or X7R ceramic capacitor placed between VIN and AGND is recommended.
8.2.3 Output Capacitor
The required output capacitance is determined by the output voltage of the LMZ30602. See Table 5 for the
amount of required capacitance. The required output capacitance must include at least one 47 µF ceramic
capacitor. For applications where the ambient operating temperature is less than 0°C, an additional 100 µF
polymer-tantalum capacitor is recommended. When adding additional non-ceramic bulk capacitors, low-ESR
devices like the ones recommended in Table 7 are required. The required capacitance above the minimum is
determined by actual transient deviation requirements. See Table 6 for typical transient response values for
several output voltage, input voltage and capacitance combinations. Table 7 includes a preferred list of
capacitors by vendor.
Table 5. Required Output Capacitance
VOUT RANGE (V)
(1)
(2)
MINIMUM REQUIRED COUT (µF)
MIN
MAX
0.8
< 1.8
147 (1)
1.8
< 3.3
100 (2)
3.3
3.6
47 (2)
Minimum required must include at least 1 x 47 µF ceramic capacitor plus 1 x 100 µF polymer-tantalum
capacitor.
Minimum required must include at least 47 µF of ceramic capacitance.
Submit Documentation Feedback
Copyright © 2013–2018, Texas Instruments Incorporated
Product Folder Links: LMZ30602
11
LMZ30602
SNVS997B – JULY 2013 – REVISED APRIL 2018
www.ti.com
Table 6. Output Voltage Transient Response
CIN1 = 1 x 47 µF CERAMIC, CIN2 = 220 µF POLYMER-TANTALUM, LOAD STEP = 1 A, 1 A/µs
VOUT (V)
VIN (V)
3.3
0.8
5
3.3
1.2
5
3.3
1.8
5
2.5
5
3.3
5
COUT1 Ceramic
COUT2 BULK
VOLTAGE
DEVIATION (mV)
PEAK-PEAK (mV)
RECOVERY TIME
(µs)
47 µF
100 µF
30
55
70
47 µF
330 µF
20
35
70
47 µF
100 µF
30
50
65
47 µF
330 µF
20
35
65
47 µF
100 µF
35
65
65
47 µF
330 µF
25
50
80
47 µF
100 µF
35
70
65
47 µF
330 µF
25
45
75
47 µF
100 µF
45
80
70
47 µF
330 µF
35
65
90
47 µF
100 µF
40
65
70
47 µF
330 µF
35
65
90
47 µF
100 µF
60
100
70
2x 47 µF
-
75
140
75
47 µF
100 µF
70
130
80
47 µF
-
90
180
90
Table 7. Recommended Input/Output Capacitors (1)
CAPACITOR CHARACTERISTICS
VENDOR
SERIES
PART NUMBER
WORKING
VOLTAGE
(V)
CAPACITANCE
(µF)
ESR (2)
(mΩ)
Murata
X5R
GRM32ER61C476K
16
47
2
TDK
X5R
C3225X5R0J107M
6.3
100
2
Murata
X5R
GRM32ER60J107M
6.3
100
2
TDK
X5R
C3225X5R0J476K
6.3
47
2
Murata
X5R
GRM32ER60J476M
6.3
47
2
Sanyo
POSCAP
10TPE220ML
10
220
25
Kemet
T520
T520V107M010ASE025
10
100
25
Sanyo
POSCAP
6TPE100MPB
6.3
100
25
Sanyo
POSCAP
2R5TPE220M7
2.5
220
7
Kemet
T530
T530D227M006ATE006
6.3
220
6
Kemet
T530
T530D337M006ATE010
6.3
330
10
Sanyo
POSCAP
2TPF330M6
2.0
330
6
Sanyo
POSCAP
6TPE330MFL
6.3
330
15
(1)
(2)
12
Capacitor Supplier Verification
Please verify availability of capacitors identified in this table.
RoHS, Lead-free and Material Details
Please consult capacitor suppliers regarding material composition, RoHS status, lead-free status, and manufacturing process
requirements.
Maximum ESR @ 100kHz, 25°C.
Submit Documentation Feedback
Copyright © 2013–2018, Texas Instruments Incorporated
Product Folder Links: LMZ30602
LMZ30602
www.ti.com
SNVS997B – JULY 2013 – REVISED APRIL 2018
8.3 Transient Response
Figure 11. VIN = 5V, VOUT = 0.8V, 1A Load Step
Figure 12. VIN = 3.3V, VOUT = 0.8V, 1A Load Step
Figure 13. VIN = 5V, VOUT = 1.2V, 1A Load Step
Figure 14. VIN = 3.3V, VOUT = 1.2V, 1A Load Step
Submit Documentation Feedback
Copyright © 2013–2018, Texas Instruments Incorporated
Product Folder Links: LMZ30602
13
LMZ30602
SNVS997B – JULY 2013 – REVISED APRIL 2018
www.ti.com
Transient Response (continued)
14
Figure 15. VIN = 5V, VOUT = 1.8V, 1A Load Step
Figure 16. VIN = 3.3V, VOUT = 1.8V, 1A Load Step
Figure 17. VIN = 5V, VOUT = 2.5V, 1A Load Step
Figure 18. VIN = 5V, VOUT = 3.3V, 1A Load Step
Submit Documentation Feedback
Copyright © 2013–2018, Texas Instruments Incorporated
Product Folder Links: LMZ30602
LMZ30602
www.ti.com
SNVS997B – JULY 2013 – REVISED APRIL 2018
8.4 Application Schematics
VIN
2.95 V to 6 V
VIN
+
CIN2
220 F
LMZ30602
PWRGD
CIN1
47 F
VOUT
1.2 V
SENSE+
VOUT
INH/UVLO
COUT1 +
47 F
COUT2
100 F
RT/CLK
RRT
715 k
SS/TR
VADJ
STSEL
PGND
AGND
RSET
2.87 k
Figure 19. Typical Schematic
VIN = 2.95 V to 6.0 V, VOUT = 1.2 V
VIN
4.4 V to 6 V
VIN
+
CIN2
220 F
LMZ30602
PWRGD
CIN1
47 F
VOUT
3.3 V
SENSE+
VOUT
INH/UVLO
COUT1
47 F
COUT2
47 F
RT/CLK
RRT
174 k
SS/TR
VADJ
STSEL
PGND
AGND
RSET
459
Figure 20. Typical Schematic
VIN = 4.4 V to 6.0 V, VOUT = 3.3 V
Submit Documentation Feedback
Copyright © 2013–2018, Texas Instruments Incorporated
Product Folder Links: LMZ30602
15
LMZ30602
SNVS997B – JULY 2013 – REVISED APRIL 2018
www.ti.com
8.5 Custom Design With WEBENCH® Tools
Click here to create a custom design using the LMZ30602 device with the WEBENCH® Power Designer.
1. Start by entering the input voltage (VIN), output voltage (VOUT), and output current (IOUT) requirements.
2. Optimize the design for key parameters such as efficiency, footprint, and cost using the optimizer dial.
3. Compare the generated design with other possible solutions from Texas Instruments.
The WEBENCH Power Designer provides a customized schematic along with a list of materials with real-time
pricing and component availability.
In
•
•
•
•
most cases, these actions are available:
Run electrical simulations to see important waveforms and circuit performance
Run thermal simulations to understand board thermal performance
Export customized schematic and layout into popular CAD formats
Print PDF reports for the design, and share the design with colleagues
Get more information about WEBENCH tools at www.ti.com/WEBENCH.
8.6 Power Good (PWRGD)
The PWRGD pin is an open drain output. Once the voltage on the SENSE+ pin is between 93% and 105% of the
set voltage, the PWRGD pin pull-down is released and the pin floats. The recommended pull-up resistor value is
between 10 kΩ and 100 kΩ to a voltage source that is 6 V or less. The PWRGD pin is in a defined state once
VIN is greater than 1.2 V, but with reduced current sinking capability. The PWRGD pin achieves full current
sinking capability once the VIN pin is above 2.95V. Figure 21 shows the PWRGD waveform during power-up.
The PWRGD pin is pulled low when the voltage on SENSE+ is lower than 91% or greater than 107% of the
nominal set voltage. Also, the PWRGD pin is pulled low if the input UVLO or thermal shutdown is asserted, or if
the INH pin is pulled low.
16
Submit Documentation Feedback
Copyright © 2013–2018, Texas Instruments Incorporated
Product Folder Links: LMZ30602
LMZ30602
www.ti.com
SNVS997B – JULY 2013 – REVISED APRIL 2018
8.7 Power-Up Characteristics
When configured as shown in the front page schematic, the LMZ30602 produces a regulated output voltage
following the application of a valid input voltage. During the power-up, internal soft-start circuitry slows the rate
that the output voltage rises, thereby limiting the amount of in-rush current that can be drawn from the input
source. The soft-start circuitry introduces a short time delay from the point that a valid input voltage is
recognized. Figure 21 shows the start-up waveforms for a LMZ30602, operating from a 5-V input and with the
output voltage adjusted to 1.8 V. The waveform is measured with a 2-A constant current load.
Figure 21. Start-Up Waveforms
8.8 Remote Sense
The SENSE+ pin must be connected to VOUT at the load, or at the device pins.
Connecting the SENSE+ pin to VOUT at the load improves the load regulation performance of the device by
allowing it to compensate for any I-R voltage drop between its output pins and the load. An I-R drop is caused by
the high output current flowing through the small amount of pin and trace resistance. This should be limited to a
maximum of 300 mV.
NOTE
The remote sense feature is not designed to compensate for the forward drop of nonlinear
or frequency dependent components that may be placed in series with the converter
output. Examples include OR-ing diodes, filter inductors, ferrite beads, and fuses. When
these components are enclosed by the SENSE+ connection, they are effectively placed
inside the regulation control loop, which can adversely affect the stability of the regulator.
Submit Documentation Feedback
Copyright © 2013–2018, Texas Instruments Incorporated
Product Folder Links: LMZ30602
17
LMZ30602
SNVS997B – JULY 2013 – REVISED APRIL 2018
www.ti.com
8.9 Output On/Off Inhibit (INH)
The INH pin provides electrical on/off control of the device. Once the INH pin voltage exceeds the threshold
voltage, the device starts operation. If the INH pin voltage is pulled below the threshold voltage, the regulator
stops switching and enters low quiescent current state.
The INH pin has an internal pull-up current source, allowing the user to float the INH pin for enabling the device.
If an application requires controlling the INH pin, use an open drain/collector device, or a suitable logic gate to
interface with the pin. Do not place an external pull-up resistor on this pin. Figure 22 shows the typical application
of the inhibit function.
Turning Q1 on applies a low voltage to the inhibit control (INH) pin and disables the output of the supply, as
shown in Figure 23. If Q1 is turned off, the supply executes a soft-start power-up sequence, as shown in
Figure 24. The waveforms were measured with a 2-A constant current load.
INH/UVLO
Q1
INH
Control
AGND
Figure 22. Typical Inhibit Control
Figure 23. Inhibit Turn-Off
18
Figure 24. Inhibit Turn-On
Submit Documentation Feedback
Copyright © 2013–2018, Texas Instruments Incorporated
Product Folder Links: LMZ30602
LMZ30602
www.ti.com
SNVS997B – JULY 2013 – REVISED APRIL 2018
8.10 Slow Start (SS/TR)
Connecting the STSEL pin to AGND and leaving SS/TR pin open enables the internal SS capacitor with a slow
start interval of approximately 1.1 ms. Adding additional capacitance between the SS pin and AGND increases
the slow start time. Table 8 shows an additional SS capacitor connected to the SS/TR pin and the STSEL pin
connected to AGND. See Table 8 below for SS capacitor values and timing interval.
SS/TR
CSS
(Optional)
AGND
STSEL
UDG-11119
Figure 25. Slow-Start Capacitor (CSS) and STSEL Connection
Table 8. Slow-Start Capacitor Values and Slow-Start Time
CSS (pF)
open
2200
4700
10000
15000
22000
25000
SS Time (msec)
1.1
1.9
2.8
4.6
6.4
8.8
9.8
8.11 Overcurrent Protection
For protection against load faults, the LMZ30602 uses current limiting. The device is protected from overcurrent
conditions by cycle-by-cycle current limiting and frequency foldback. During an overcurrent condition the output
current is limited and the output voltage is reduced, as shown in Figure 26. When the overcurrent condition is
removed, the output voltage returns to the established voltage, as shown in Figure 27.
Figure 26. Overcurrent Limiting
Figure 27. Removal of Overcurrent Condition
Submit Documentation Feedback
Copyright © 2013–2018, Texas Instruments Incorporated
Product Folder Links: LMZ30602
19
LMZ30602
SNVS997B – JULY 2013 – REVISED APRIL 2018
www.ti.com
8.12 Synchronization (CLK)
An internal phase locked loop (PLL) has been implemented to allow synchronization between 500 kHz and
2 MHz, and to easily switch from RT mode to CLK mode. To implement the synchronization feature, connect a
square wave clock signal to the RT/CLK pin with a minimum pulse width of 75 ns. The maximum clock pulse
width must be calculated using Equation 2. The clock signal amplitude must transition lower than 0.4 V and
higher than 2.2 V. The start of the switching cycle is synchronized to the falling edge of RT/CLK pin. In
applications where both RT mode and CLK mode are needed, the device can be configured as shown in
Figure 28.
Before the external clock is present, the device works in RT mode and the switching frequency is set by RT
resistor (RRT). When the external clock is present, the CLK mode overrides the RT mode. The device switches
from RT mode to CLK mode and the RT/CLK pin becomes high impedance as the PLL starts to lock onto the
frequency of the external clock. The device will lock to the external clock frequency approximately 15 µs after a
valid clock signal is present. It is not recommended to switch from CLK mode back to RT mode because the
switching frequency drops to a lower frequency before returning to the switching frequency set by RRT.
470 pF
1 kΩ
RT/CLK
500 kHz to 2 MHz
External Clock
æ
ö
V
0.75 ´ ç 1 - OUT ÷
ç
VIN(min ) ÷
è
ø
CLK _ PWMAX =
fSW
RRT
AGND
(2)
Figure 28. CLK/RT Configuration
The synchronization frequency must be selected based on the output voltages of the devices being
synchronized. Table 9 shows the allowable frequencies for a given range of output voltages based on a resistive
load. 5-V input applications requiring 1.5 A or less can synchronize to a wider frequency range. For the most
efficient solution, always synchronize to the lowest allowable frequency. For example, an application requires
synchronizing three LMZ30602 devices with output voltages of 1.2V@1.7A, 1.8@1.1AV and 3.3V@ 1.0A, all
powered from VIN = 5V. Table 9 shows that all three output voltages can be synchronized to any frequency
between 700 kHz to 1 MHz. For best efficiency, choose 700 kHz as the synchronization frequency.
Table 9. Synchronization Frequency vs Output Voltage
VIN = 5 V
SYNCHRONIZATION
FREQUENCY (kHz)
20
RRT
(kΩ)
VIN = 3.3 V
IOUT ≤ 1.5 A
IOUT > 1.5 A
All IOUT
VOUT RANGE (V)
VOUT RANGE (V)
VOUT RANGE (V)
MIN
MAX
MIN
MAX
MIN
MAX
500
open
0.8
1.4
0.8
0.8
0.8
1.1
550
3400
0.8
1.6
0.8
0.9
0.8
1.2
600
1800
0.8
1.9
0.8
1.1
0.8
2.0
650
1200
0.8
2.4
0.8
1.2
0.8
2.2
700
887
0.8
3.6
0.8
1.3
0.8
2.4
750
715
0.9
3.6
0.9
1.5
0.8
2.5
800
590
0.9
3.6
0.9
1.7
0.8
2.5
900
511
1.0
3.6
1.0
2.2
0.8
2.5
1000
348
1.2
3.6
1.2
2.5
0.8
2.5
1250
232
1.4
3.6
1.4
3.3
1.0
2.5
1500
174
1.7
3.6
1.7
3.6
1.1
2.5
1750
137
2.0
3.6
2.0
3.6
1.3
2.4
2000
113
2.3
3.6
2.3
3.6
1.5
2.3
Submit Documentation Feedback
Copyright © 2013–2018, Texas Instruments Incorporated
Product Folder Links: LMZ30602
LMZ30602
www.ti.com
SNVS997B – JULY 2013 – REVISED APRIL 2018
8.13 Sequencing (SS/TR)
Many of the common power supply sequencing methods can be implemented using the SS/TR, INH and
PWRGD pins. The sequential method is illustrated in Figure 29 using two LMZ30602 devices. The PWRGD pin
of the first device is coupled to the INH pin of the second device which enables the second power supply once
the primary supply reaches regulation. Do not place a pull-up resistor on PWRGD in this configuration. Figure 30
shows sequential turn-on waveforms of two LMZ30602 devices.
INH/UVLO
PWRGD
INH/UVLO
SS/TR
SS/TR
STSEL
STSEL
PWRGD
UDG-11120
Figure 29. Sequencing Schematic
Figure 30. Sequencing Waveforms
Simultaneous power supply sequencing can be implemented by connecting the resistor network of R1 and R2
shown in Figure 31 to the output of the power supply that needs to be tracked or to another voltage reference
source. Figure 32 shows simultaneous turn-on waveforms of two LMZ30602 devices. Use Equation 3 and
Equation 4 to calculate the values of R1 and R2.
R1 =
(VOUT2 ´ 12.6 )
0.803
(kW )
R2 =
(3)
0.803 ´ R1
(kW )
V
( OUT2 - 0.803 )
Submit Documentation Feedback
Copyright © 2013–2018, Texas Instruments Incorporated
Product Folder Links: LMZ30602
(4)
21
LMZ30602
SNVS997B – JULY 2013 – REVISED APRIL 2018
www.ti.com
VOUT1
VOUT
INH/UVLO
SS/TR
STSEL
VOUT2
VOUT
INH/UVLO
R1
SS/TR
STSEL
R2
Figure 32. Simultaneous Tracking Waveforms
Figure 31. Simultaneous Tracking Schematic
22
Submit Documentation Feedback
Copyright © 2013–2018, Texas Instruments Incorporated
Product Folder Links: LMZ30602
LMZ30602
www.ti.com
SNVS997B – JULY 2013 – REVISED APRIL 2018
8.14 Programmable Undervoltage Lockout (UVLO)
The LMZ30602 implements internal UVLO circuitry on the VIN pin. The device is disabled when the VIN pin
voltage falls below the internal VIN UVLO threshold. The internal VIN UVLO rising threshold is 3.135 V (max)
with a typical hysteresis of 300 mV.
If an application requires a higher UVLO threshold on the VIN pin, the UVLO pin can be configured as shown in
Figure 33. Table 10 lists standard values for RUVLO to adjust the VIN UVLO voltage up.
VIN
VIN
INH/UVLO
RUVLO
AGND
Figure 33. Adjustable VIN UVLO
Table 10. Standard Resistor values for Adjusting VIN UVLO
VIN UVLO (V) (typ)
3.25
3.5
3.75
4.0
4.25
4.5
4.75
RUVLO (kΩ)
294
133
86.6
63.4
49.9
42.2
35.7
Hysteresis (mV)
325
335
345
355
365
375
385
8.15 Thermal Shutdown
The internal thermal shutdown circuitry forces the device to stop switching if the junction temperature exceeds
175°C typically. The device reinitiates the power up sequence when the junction temperature drops below 160°C
typically.
8.16 EMI
The LMZ30602 is compliant with EN55022 Class B radiated emissions. Figure 34 and Figure 35 show typical
examples of radiated emissions plots for the LMZ30602 operating from 5V and 3.3V respectively. Both graphs
include the plots of the antenna in the horizontal and vertical positions.
Figure 34. Radiated Emissions 5-V Input, 1.8-V Output, 2-A
Load (EN55022 Class B)
Figure 35. Radiated Emissions 3.3-V Input, 1.8-V Output, 2A Load (EN55022 Class B)
Submit Documentation Feedback
Copyright © 2013–2018, Texas Instruments Incorporated
Product Folder Links: LMZ30602
23
LMZ30602
SNVS997B – JULY 2013 – REVISED APRIL 2018
www.ti.com
8.17 Layout Considerations
To achieve optimal electrical and thermal performance, an optimized PCB layout is required. Figure 36, shows a
typical PCB layout. Some considerations for an optimized layout are:
• Use large copper areas for power planes (VIN, VOUT, and PGND) to minimize conduction loss and thermal
stress.
• Place ceramic input and output capacitors close to the module pins to minimize high frequency noise.
• Locate additional output capacitors between the ceramic capacitor and the load.
• Place a dedicated AGND copper area beneath the LMZ30602.
• Connect the AGND and PGND copper area at one point; directly at the pin 37 PowerPad using multiple vias.
• Place RSET, RRT, and CSS as close as possible to their respective pins.
• Use multiple vias to connect the power planes to internal layers.
SENSE+
Via
PGND
Vias to
PGND
Layer
CIN1
VIN
SENSE+
Via
Vias to
Topside
PGND
Copper
COUT1
PH
Vias to
Topside
AGND
Copper
PGND
Plane
Vias to
PGND
Layer
VOUT
SENSE+
Via
AGND
RSET
SENSE+
Via
RRT
Figure 36. Typical Top-Layer Recommended Layout
24
Figure 37. Typical PGND-Layer Recommended Layout
Submit Documentation Feedback
Copyright © 2013–2018, Texas Instruments Incorporated
Product Folder Links: LMZ30602
LMZ30602
www.ti.com
SNVS997B – JULY 2013 – REVISED APRIL 2018
9 Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Revision A (June 2017) to Revision B
Page
•
Added WEBENCH® design links for the LMZ30602.............................................................................................................. 1
•
Increased the peak reflow temperature and maximum number of reflows to JEDEC specifications for improved
manufacturability .................................................................................................................................................................... 2
•
Added Device and Documentation Support section ............................................................................................................ 26
•
Added Mechanical, Packaging, and Orderable Information section..................................................................................... 27
Changes from Original (July 2013) to Revision A
Page
•
Added peak reflow and maximum number of reflows information ........................................................................................ 2
•
Changed voltage levels in Table 9 ....................................................................................................................................... 20
Submit Documentation Feedback
Copyright © 2013–2018, Texas Instruments Incorporated
Product Folder Links: LMZ30602
25
LMZ30602
SNVS997B – JULY 2013 – REVISED APRIL 2018
www.ti.com
10 Device and Documentation Support
10.1 Device Support
10.1.1 Development Support
10.1.1.1 Custom Design With WEBENCH® Tools
Click here to create a custom design using the LMZ30602 device with the WEBENCH® Power Designer.
1. Start by entering the input voltage (VIN), output voltage (VOUT), and output current (IOUT) requirements.
2. Optimize the design for key parameters such as efficiency, footprint, and cost using the optimizer dial.
3. Compare the generated design with other possible solutions from Texas Instruments.
The WEBENCH Power Designer provides a customized schematic along with a list of materials with real-time
pricing and component availability.
In
•
•
•
•
most cases, these actions are available:
Run electrical simulations to see important waveforms and circuit performance
Run thermal simulations to understand board thermal performance
Export customized schematic and layout into popular CAD formats
Print PDF reports for the design, and share the design with colleagues
Get more information about WEBENCH tools at www.ti.com/WEBENCH.
10.2 Receiving Notification of Documentation Updates
To receive notification of documentation updates, navigate to the device product folder on ti.com. In the upper
right corner, click on Alert me to register and receive a weekly digest of any product information that has
changed. For change details, review the revision history included in any revised document.
10.3 Community Resources
The following links connect to TI community resources. Linked contents are provided "AS IS" by the respective
contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of
Use.
TI E2E™ Online Community TI's Engineer-to-Engineer (E2E) Community. Created to foster collaboration
among engineers. At e2e.ti.com, you can ask questions, share knowledge, explore ideas and help
solve problems with fellow engineers.
Design Support TI's Design Support Quickly find helpful E2E forums along with design support tools and
contact information for technical support.
10.4 Trademarks
E2E is a trademark of Texas Instruments.
WEBENCH is a registered trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
10.5 Electrostatic Discharge Caution
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
10.6 Glossary
SLYZ022 — TI Glossary.
This glossary lists and explains terms, acronyms, and definitions.
26
Submit Documentation Feedback
Copyright © 2013–2018, Texas Instruments Incorporated
Product Folder Links: LMZ30602
LMZ30602
www.ti.com
SNVS997B – JULY 2013 – REVISED APRIL 2018
11 Mechanical, Packaging, and Orderable Information
The following pages include mechanical, packaging, and orderable information. This information is the most
current data available for the designated devices. This data is subject to change without notice and revision of
this document. For browser-based versions of this data sheet, refer to the left-hand navigation.
11.1 Tape and Reel Information
TAPE DIMENSIONS
REEL DIMENSIONS
K0
P1
B0 W
Reel
Diameter
Cavity
A0
B0
K0
W
P1
A0
Dimension designed to accommodate the component width
Dimension designed to accommodate the component length
Dimension designed to accommodate the component thickness
Overall width of the carrier tape
Pitch between successive cavity centers
Reel Width (W1)
QUADRANT ASSIGNMENTS FOR PIN 1 ORIENTATION IN TAPE
Sprocket Holes
Q1
Q2
Q1
Q2
Q3
Q4
Q3
Q4
User Direction of Feed
Pocket Quadrants
Device
Package
Type
Package
Drawing
Pins
SPQ
Reel
Diameter
(mm)
Reel
Width W1
(mm)
A0
(mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
(mm)
Pin1
Quadrant
LMZ30602RKGR
B1QFN
RKG
39
500
330.0
24.4
9.35
15.35
3.1
16.0
24.0
Q1
LMZ30602RKGT
B1QFN
RKG
39
250
330.0
24.4
9.35
15.35
3.1
16.0
24.0
Q1
Submit Documentation Feedback
Copyright © 2013–2018, Texas Instruments Incorporated
Product Folder Links: LMZ30602
27
LMZ30602
SNVS997B – JULY 2013 – REVISED APRIL 2018
www.ti.com
TAPE AND REEL BOX DIMENSIONS
Width (mm)
28
L
W
Device
H
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
LMZ30602RKGR
B1QFN
RKG
39
500
383.0
353.0
58.0
LMZ30602RKGT
B1QFN
RKG
39
250
383.0
353.0
58.0
Submit Documentation Feedback
Copyright © 2013–2018, Texas Instruments Incorporated
Product Folder Links: LMZ30602
PACKAGE OPTION ADDENDUM
www.ti.com
4-Jun-2020
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
LMZ30602RKGR
ACTIVE
B1QFN
RKG
39
500
RoHS Exempt
& Green
NIPDAU
Level-3-250C-168 HR
-40 to 85
LMZ30602
LMZ30602RKGT
ACTIVE
B1QFN
RKG
39
250
RoHS Exempt
& Green
NIPDAU
Level-3-250C-168 HR
-40 to 85
LMZ30602
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of
工商网监
湘ICP备2023018690号
