SN54AHC32
SN74AHC32
www.ti.com
SCLS247I – OCTOBER 1995 – REVISED JUNE 2013
QUADRUPLE 2-INPUT POSITIVE-OR GATES
Check for Samples: SN54AHC32, SN74AHC32
FEATURES
1
Operating Range 2-V to 5.5-V VCC
Latch-Up Performance Exceeds 250 mA Per
JESD 17
13
3
12
4
11
5
10
6
9
7
8
1B
1Y
2A
2B
2Y
14
1B
1A
NC
VCC
4B
VCC
1
SN54AHC32 . . . FK PACKAGE
(TOP VIEW)
1Y
NC
2A
NC
2B
13 4B
2
3
12 4A
4
4Y
10 3B
9 3A
11
5
6
7
8
4
3 2 1 20 19
18
5
17
6
16
7
15
8
14
9 10 11 12 13
4A
NC
4Y
NC
3B
2Y
GND
NC
3Y
3A
2
VCC
4B
4A
4Y
3B
3A
3Y
3Y
14
1A
1
ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 200-V Machine Model (A115-A)
– 1000-V Charged-Device Model (C101)
SN74AHC32 . . . RGY PACKAGE
(TOP VIEW)
SN54AHC32 . . . J OR W PACKAGE
SN74AHC32 . . . D, DB, DGV, N, NS,
OR PW PACKAGE
(TOP VIEW)
1A
1B
1Y
2A
2B
2Y
GND
•
GND
•
•
NC − No internal connection
DESCRIPTION
The ’AHC32 devices are quadruple 2-input positive-OR gates. These devices perform the Boolean function Y =
A • B or Y = A + B in positive logic.
FUNCTION TABLE
(EACH GATE)
INPUTS
OUTPUT
A
B
Y
H
X
H
X
H
H
L
L
L
LOGIC DIAGRAM (POSITIVE LOGIC)
A
B
Y
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1995–2013, Texas Instruments Incorporated
SN54AHC32
SN74AHC32
SCLS247I – OCTOBER 1995 – REVISED JUNE 2013
www.ti.com
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range (unless otherwise noted) (1)
VALUE
UNIT
Supply voltage range, VCC
–0.5 to 7
V
Input voltage range, VI (2)
–0.5 to 7
V
Output voltage range, VO (2)
–0.5 to VCC + 0.5
V
Input clamp current, IIK (VI < 0)
–20
mA
Output clamp current, IOK (VO < 0 or VO > VCC)
±20
mA
Continuous output current, IO (VO = 0 to VCC)
±25
mA
Continuous current through VCC or GND
±50
mA
D package
Package thermal impedance, θJA
(3)
86
DB package (3)
96
DGV package (3)
127
N package (3)
80
NS package (3)
76
PW package (3)
113
RGY package (4)
47
Storage temperature range, Tstg
(1)
(2)
(3)
(4)
°C/W
–65 to 150
°C
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating
conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
The package thermal impedance is calculated in accordance with JESD 51-7.
The package thermal impedance is calculated in accordance with JESD 51-5
RECOMMENDED OPERATING CONDITIONS (1)
SN54AHC32
VCC
Supply voltage
VIH
High-level input voltage
SN74AHC32
MIN
MAX
2
5.5
MIN
MAX
2
5.5
VCC= 2 V
1.5
1.5
VCC= 3V
2.1
2.1
VCC= 5.5 V
3.85
UNIT
V
V
3.85
VCC= 2 V
0.5
0.5
VCC= 3 V
0.9
0.9
VIL
Low-level Input voltage
VI
Input voltage
0
5.5
0
5.5
V
VO
Output voltage
0
VCC
0
VCC
V
VCC= 5.5 V
1.65
VCC= 2 V
IOH
High-level output current
IOL
Low-level output current
Δt/Δv
Input Transition rise or fall rate
TA
Operating free-air temperature
(1)
2
1.65
–50
–50
VCC= 3.3 V ± 0.3 V
–4
–4
VCC= 5 V ± 0.5 V
–8
–8
VCC= 2 V
50
50
VCC= 3.3 V ± 0.3 V
4
4
VCC= 5 V ± 0.5 V
8
8
100
100
20
20
VCC= 3.3 V ± 0.3 V
VCC= 5 V ± 0.5 V
–55
125
V
–40
125
mA
mA
ns/V
°C
All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Submit Documentation Feedback
Copyright © 1995–2013, Texas Instruments Incorporated
Product Folder Links: SN54AHC32 SN74AHC32
SN54AHC32
SN74AHC32
www.ti.com
SCLS247I – OCTOBER 1995 – REVISED JUNE 2013
ELECTRICAL CHARACTERISTICS
over operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
IOH = –50 µA
SN54AHC32
SN74AHC32
MAX
MIN
MAX
MIN
TA = –40°C TO
125°C
Recommended
MIN
TYP
2V
1.9
2
1.9
1.9
1.9
MAX
MIN
2.9
2.9
3
2.9
2.9
4.4
4.5
4.4
4.4
4.4
IOH = –4 mA
3V
2.58
2.48
2.48
2.48
IOH = –8 mA
4.5 V
3.94
VOL
ICC
VI = VCC or
GND,
Ci
VI = VCC or GND
IO = 0
V
3.8
0.1
0.1
0.1
0.1
3V
0.1
0.1
0.1
0.1
4.5 V
0.1
0.1
0.1
0.1
3V
0.36
0.5
0.44
0.5
4.5 V
0.36
0.5
0.44
0.5
±0.1
(1)
±1
±1
µA
20
20
20
µA
0 V to 5.5
V
VI = 5.5 V or GND
3.8
MAX
2V
IOH = 4 mA
IOH = 8 mA
3.8
UNIT
SN74AHC32
3V
IOL = 50 µA
(1)
TA = –40°C TO
85°C
4.5 V
VOH
II
TA = 25°C
VCC
TA = –55°C TO
125°C
5.5 V
±1
2
5V
2
10
10
V
pF
On products compliant to MIL-PRF-38535, this parameter is not production tested at VCC = 0 V.
SWITCHING CHARACTERISTICS
over recommended operating free-air temperature range, VCC = 3.3 V ± 0.3 V (unless otherwise noted) (see Figure 1)
PARAMETER
tPLH
tPHL
tPLH
tPHL
(1)
FROM
(INPUT)
TO
(OUTPUT)
LOAD
CAPACITANCE
A or B
Y
CL = 15 pF
A or B
Y
CL = 50 pF
TA = 25°C
TA = –40°C TO
125°C
TA = –55°C TO
125°C
TA = –40°C TO
85°C
SN54AHC32
SN74AHC32
SN74AHC32
MIN
MIN
MIN
MAX
MAX
Recommended
TYP
MAX
5.5 (1)
7.9 (1)
1 (1)
9.5 (1)
1
9.5
1
9.5
5.5 (1)
7.9 (1)
1 (1)
9.5 (1)
1
9.5
1
9.5
8
11.4
1
13
1
13
1
13
8
11.4
1
13
1
13
1
13
UNIT
MAX
ns
ns
On products compliant to MIL-PRF-38535, this parameter is not production tested.
SWITCHING CHARACTERISTICS
over recommended operating free-air temperature range, VCC = 5 V ± 0.5 V (unless otherwise noted) (see Figure 1)
PARAMETER
tPLH
tPHL
tPLH
tPHL
(1)
FROM
(INPUT)
TO
(OUTPUT)
LOAD
CAPACITANCE
A or B
Y
CL = 15 pF
A or B
Y
CL = 50 pF
TA = 25°C
TA = –55°C TO
125°C
TA = –40°C TO
85°C
SN54AHC32
SN74AHC32
MIN
MIN
MAX
MAX
TA = –40°C TO
125°C
Recommended
UNIT
SN74AHC32
TYP
MAX
3.8 (1)
5.5 (1)
1 (1)
6.5 (1)
1
6.5
MIN
1
MAX
6.5
3.8 (1)
5.5 (1)
1 (1)
6.5 (1)
1
6.5
1
6.5
5.3
7.5
1
8.5
1
8.5
1
8.5
5.3
7.5
1
8.5
1
8.5
1
8.5
ns
ns
On products compliant to MIL-PRF-38535, this parameter is not production tested.
Copyright © 1995–2013, Texas Instruments Incorporated
Product Folder Links: SN54AHC32 SN74AHC32
Submit Documentation Feedback
3
SN54AHC32
SN74AHC32
SCLS247I – OCTOBER 1995 – REVISED JUNE 2013
www.ti.com
NOISE CHARACTERISTICS
VCC = 5 V, CL = 50 pF, TA = 25°C (1)
SN74AHC32
PARAMETER
MIN
TYP
UNIT
MAX
VOL(P)
Quiet output, maximum dynamic VOL
0.3
0.8
V
VOL(V)
Quiet output, minimum dynamic VOL
–0.3
–0.8
V
VOH(V)
Quiet output, minimum dynamic VOH
4.7
VIH(D)
High-level dynamic input voltage
VIL(D)
Low-level dynamic input voltage
(1)
V
3.5
V
1.5
V
Characteristics are for surface-mount packages only.
OPERATING CHARACTERISTICS
VCC = 5 V, TA = 25°C
PARAMETER
Cpd
4
Power dissipation capacitance
Submit Documentation Feedback
TEST CONDITIONS
No load,
f = 1 MHz
TYP
14
UNIT
pF
Copyright © 1995–2013, Texas Instruments Incorporated
Product Folder Links: SN54AHC32 SN74AHC32
SN54AHC32
SN74AHC32
www.ti.com
SCLS247I – OCTOBER 1995 – REVISED JUNE 2013
PARAMETER MEASUREMENT INFORMATION
VCC
From Output
Under Test
RL = 1 kΩ
From Output
Under Test
Test
Point
S1
Open
TEST
GND
CL
(see Note A)
CL
(see Note A)
S1
tPLH/tPHL
tPLZ/tPZL
tPHZ/tPZH
Open Drain
Open
VCC
GND
VCC
LOAD CIRCUIT FOR
3-STATE AND OPEN-DRAIN OUTPUTS
LOAD CIRCUIT FOR
TOTEM-POLE OUTPUTS
VCC
50% VCC
Timing Input
tw
tsu
VCC
50% VCC
50% VCC
Input
0V
th
VCC
50% VCC
Data Input
50% VCC
0V
0V
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
VOLTAGE WAVEFORMS
PULSE DURATION
VCC
50% VCC
Input
50% VCC
0V
tPLH
tPHL
VOH
In-Phase
Output
50% VCC
50% VCC
VOL
tPHL
Out-of-Phase
Output
Output
Waveform 1
S1 at VCC
(see Note B)
50% VCC
VOH
50% VCC
VOL
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
50% VCC
0V
tPZL
tPLZ
≈VCC
50% VCC
tPZH
tPLH
50% VCC
VCC
Output
Control
VOL + 0.3 V
VOL
tPHZ
Output
Waveform 2
S1 at GND
(see Note B)
50% VCC
VOH − 0.3 V
VOH
≈0 V
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
A.
CL includes probe and jig capacitance.
B.
Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output
control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output
control.
C.
All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr ≤ 3 ns, tf
≤ 3 ns.
D.
The outputs are measured one at a time with one input transition per measurement.
E.
All parameters and waveforms are not applicable to all devices.
Figure 1. Load Circuit and Voltage Waveforms
Copyright © 1995–2013, Texas Instruments Incorporated
Product Folder Links: SN54AHC32 SN74AHC32
Submit Documentation Feedback
5
SN54AHC32
SN74AHC32
SCLS247I – OCTOBER 1995 – REVISED JUNE 2013
www.ti.com
REVISION HISTORY
Changes from Revision H (July 2003) to Revision I
Page
•
Changed document format from Quicksilver to DocZone. .................................................................................................... 1
•
Extended operating temperature range to 125°C ................................................................................................................. 2
6
Submit Documentation Feedback
Copyright © 1995–2013, Texas Instruments Incorporated
Product Folder Links: SN54AHC32 SN74AHC32
PACKAGE OPTION ADDENDUM
www.ti.com
24-Aug-2018
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
5962-9682501Q2A
ACTIVE
LCCC
FK
20
1
TBD
POST-PLATE
N / A for Pkg Type
-55 to 125
59629682501Q2A
SNJ54AHC
32FK
5962-9682501QCA
ACTIVE
CDIP
J
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
5962-9682501QC
A
SNJ54AHC32J
5962-9682501QDA
ACTIVE
CFP
W
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
5962-9682501QD
A
SNJ54AHC32W
SN74AHC32D
ACTIVE
SOIC
D
14
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
AHC32
SN74AHC32DBR
ACTIVE
SSOP
DB
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
HA32
SN74AHC32DE4
ACTIVE
SOIC
D
14
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
AHC32
SN74AHC32DGVR
ACTIVE
TVSOP
DGV
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
HA32
SN74AHC32DR
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
AHC32
SN74AHC32N
ACTIVE
PDIP
N
14
25
Green (RoHS
& no Sb/Br)
CU NIPDAU
N / A for Pkg Type
-40 to 125
SN74AHC32N
SN74AHC32NSR
ACTIVE
SO
NS
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
AHC32
SN74AHC32PW
ACTIVE
TSSOP
PW
14
90
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
HA32
SN74AHC32PWR
ACTIVE
TSSOP
PW
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
HA32
SN74AHC32RGYR
ACTIVE
VQFN
RGY
14
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 125
HA32
SNJ54AHC32FK
ACTIVE
LCCC
FK
20
1
TBD
POST-PLATE
N / A for Pkg Type
-55 to 125
59629682501Q2A
SNJ54AHC
32FK
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
24-Aug-2018
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
SNJ54AHC32J
ACTIVE
CDIP
J
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
5962-9682501QC
A
SNJ54AHC32J
SNJ54AHC32W
ACTIVE
CFP
W
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
5962-9682501QD
A
SNJ54AHC32W
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of
很抱歉,暂时无法提供与“SN74AHC32DR”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格
- 5+0.68969
- 50+0.67436
- 150+0.66410