SN74AHCU04DGVR

SN54AHCU04, SN74AHCU04 HEX INVERTERS SCLS234K − OCTOBER 1995 − REVISED JULY 2003 D Operating Range 2-V to 5.5-V VCC D Unbuffered Outputs D Latch-Up Performance Exceeds 250 mA Per D ESD Protection Exceeds JESD 22 − 2000-V Human-Body Model (A114-A) − 200-V Machine Model (A115-A) − 1000-V Charged-Device Model (C101) JESD 17 13 3 12 4 11 5 10 6 9 7 8 1Y 2A 2Y 3A 3Y 14 1Y 1A NC VCC 6A 1 SN54AHCU04 . . . FK PACKAGE (TOP VIEW) 2A NC 2Y NC 3A 13 6A 2 3 12 6Y 4 11 5A 5 10 5Y 9 4A 6 7 8 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 6Y NC 5A NC 5Y 3Y GND NC 4Y 4A 2 VCC 6A 6Y 5A 5Y 4A 4Y VCC 14 4Y 1 GND 1A 1Y 2A 2Y 3A 3Y GND 1A SN74AHCU04 . . . RGY PACKAGE (TOP VIEW) SN54AHCU04 . . . J OR W PACKAGE SN74AHCU04 . . . D, DB, DGV, N, NS, OR PW PACKAGE (TOP VIEW) NC − No internal connection description/ordering information The ’AHCU04 devices contain six independent inverters. These devices perform the Boolean function Y = A. Internal circuitry consists of single-stage inverters that can be used in analog applications such as crystal oscillators. ORDERING INFORMATION Tape and reel SN74AHCU04RGYR HD04 PDIP − N Tube SN74AHCU04N SN74AHCU04N Tube SN74AHCU04D Tape and reel SN74AHCU04DR SOP − NS Tape and reel SN74AHCU04NSR AHCU04 SSOP − DB Tape and reel SN74AHCU04DBR HD04 Tube SN74AHCU04PW Tape and reel SN74AHCU04PWR TVSOP − DGV Tape and reel SN74AHCU04DGVR HD04 CDIP − J Tube SNJ54AHCU04J SNJ54AHCU04J CFP − W Tube SNJ54AHCU04W SNJ54AHCU04W LCCC − FK Tube SNJ54AHCU04FK SNJ54AHCU04FK TSSOP − PW −55°C 55 C to 125 125°C C † TOP-SIDE MARKING QFN − RGY SOIC − D −40°C to 85°C ORDERABLE PART NUMBER PACKAGE† TA AHCU04 HD04 Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright © 2003, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 SN54AHCU04, SN74AHCU04 HEX INVERTERS SCLS234K − OCTOBER 1995 − REVISED JULY 2003 FUNCTION TABLE (each inverter) INPUT A OUTPUT Y H L L H logic diagram (positive logic) A Y absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V Output voltage range, VO (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to VCC + 0.5 V Input clamp current, IIK (VI < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −20 mA Output clamp current, IOK (VO < 0 or VO > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA Continuous output current, IO (VO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±25 mA Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA Package thermal impedance, θJA (see Note 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W (see Note 2): DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96°C/W (see Note 2): DGV package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127°C/W (see Note 2): N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80°C/W (see Note 2): NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76°C/W (see Note 2): PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113°C/W (see Note 3): RGY package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47°C/W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51-7. 3. The package thermal impedance is calculated in accordance with JESD 51-5. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SN54AHCU04, SN74AHCU04 HEX INVERTERS SCLS234K − OCTOBER 1995 − REVISED JULY 2003 recommended operating conditions (see Note 4) SN54AHCU04 VCC Supply voltage VIH High-level High level input voltage VIL Low-level Low level input voltage VI Input voltage VO Output voltage MIN MAX 2 5.5 High-level High level output current IOL Low-level Low level output current TA MIN MAX 2 5.5 VCC = 2 V 1.7 1.7 VCC = 3 V 2.4 2.4 VCC = 5.5 V 4.4 4.4 0.3 0.3 VCC = 3 V 0.6 0.6 VCC = 5.5 V 1.1 1.1 0 5.5 0 5.5 0 VCC 0 V V VCC V −50 mA VCC = 3.3 V ± 0.3 V −4 −4 −8 −8 VCC = 2 V 50 50 VCC = 3.3 V ± 0.3 V 4 4 VCC = 5 V ± 0.5 V 8 8 −55 V −50 VCC = 5 V ± 0.5 V Operating free-air temperature UNIT V VCC = 2 V VCC = 2 V IOH SN74AHCU04 125 −40 85 mA mA mA °C NOTE 4: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VCC IOH = −50 50 mA TA = 25°C SN54AHCU04 MIN TYP 2V 1.8 2 1.8 1.8 3V 2.7 3 2.7 2.7 4 4.5 4.5 V MAX MIN MAX SN74AHCU04 MIN 4 4 IOH = −4 mA 3V 2.58 2.48 2.48 IOH = −8 mA 4.5 V 3.94 3.8 3.8 VOH MAX UNIT V 2V 0.2 0.2 0.2 3V 0.3 0.3 0.3 4.5 V 0.5 0.5 0.5 IOL = 4 mA 3V 0.36 0.5 0.44 IOL = 8 mA 4.5 V 0.36 0.5 0.44 0 V to 5.5 V ±0.1 ±1* ±1 mA 2 20 20 mA 10 pF IOL = 50 mA VOL II VI = 5.5 V or GND ICC VI = VCC or GND, Ci VI = VCC or GND IO = 0 5.5 V 5V 2 10 V * On products compliant to MIL-PRF-38535, this parameter is not production tested at VCC = 0 V. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 SN54AHCU04, SN74AHCU04 HEX INVERTERS SCLS234K − OCTOBER 1995 − REVISED JULY 2003 switching characteristics over recommended operating free-air temperature range, VCC = 3.3 V ± 0.3 V (unless otherwise noted) (see Figure 1) PARAMETER tPLH tPHL tPLH tPHL FROM (INPUT) TO (OUTPUT) LOAD CAPACITANCE A Y CL = 15 pF A Y CL = 50 pF TA = 25°C MIN SN54AHCU04 SN74AHCU04 TYP MAX MIN MAX MIN MAX 5* 7.1* 1* 8.5* 1 8.5 5* 7.1* 1* 8.5* 1 8.5 7.5 10.6 1 12 1 12 7.5 10.6 1 12 1 12 UNIT ns ns * On products compliant to MIL-PRF-38535, this parameter is not production tested. switching characteristics over recommended operating free-air temperature range, VCC = 5 V ± 0.5 V (unless otherwise noted) (see Figure 1) PARAMETER tPLH tPHL tPLH tPHL FROM (INPUT) TO (OUTPUT) LOAD CAPACITANCE A Y CL = 15 pF A Y CL = 50 pF TA = 25°C MIN SN54AHCU04 SN74AHCU04 TYP MAX MIN MAX MIN MAX 3.5* 5.5* 1* 6* 1 6.5 3.5* 5.5* 1* 6* 1 6.5 5 7 1 8 1 8 5 7 1 8 1 8 UNIT ns ns * On products compliant to MIL-PRF-38535, this parameter is not production tested. noise characteristics, VCC = 5 V, CL = 50 pF, TA = 25°C (see Note 5) SN74AHCU04 PARAMETER MIN TYP MAX UNIT VOL(P) Quiet output, maximum dynamic VOL 0.5 V VOL(V) Quiet output, minimum dynamic VOL −0.5 V VOH(V) Quiet output, minimum dynamic VOH 4.3 V VIH(D) High-level dynamic input voltage VIL(D) Low-level dynamic input voltage 4 V 1 V NOTE 5: Characteristics are for surface-mount packages only. operating characteristics, VCC = 5 V, TA = 25°C PARAMETER Cpd 4 TEST CONDITIONS Power dissipation capacitance No load, POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 f = 1 MHz TYP UNIT 7.3 pF SN54AHCU04, SN74AHCU04 HEX INVERTERS SCLS234K − OCTOBER 1995 − REVISED JULY 2003 PARAMETER MEASUREMENT INFORMATION VCC From Output Under Test RL = 1 kΩ From Output Under Test Test Point S1 Open TEST GND CL (see Note A) CL (see Note A) S1 tPLH/tPHL tPLZ/tPZL tPHZ/tPZH Open Drain Open VCC GND VCC LOAD CIRCUIT FOR 3-STATE AND OPEN-DRAIN OUTPUTS LOAD CIRCUIT FOR TOTEM-POLE OUTPUTS VCC 50% VCC Timing Input tw tsu VCC 50% VCC 50% VCC Input 0V th VCC 50% VCC Data Input 50% VCC 0V 0V VOLTAGE WAVEFORMS PULSE DURATION VOLTAGE WAVEFORMS SETUP AND HOLD TIMES VCC 50% VCC Input 50% VCC 0V tPLH tPHL VOH In-Phase Output 50% VCC tPHL Out-of-Phase Output 50% VCC VOL Output Waveform 1 S1 at VCC (see Note B) 50% VCC VOH 50% VCC VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES INVERTING AND NONINVERTING OUTPUTS 50% VCC 0V tPZL tPLZ ≈VCC 50% VCC tPZH tPLH 50% VCC VCC Output Control Output Waveform 2 S1 at GND (see Note B) VOL + 0.3 V VOL tPHZ 50% VCC VOH − 0.3 V VOH ≈0 V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES LOW- AND HIGH-LEVEL ENABLING NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr ≤ 3 ns, tf ≤ 3 ns. D. The outputs are measured one at a time with one input transition per measurement. E. All parameters and waveforms are not applicable to all devices. Figure 1. Load Circuit and Voltage Waveforms POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 PACKAGE OPTION ADDENDUM www.ti.com 14-Oct-2022 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) 5962-9680301QDA ACTIVE CFP W 14 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-9680301QD A SNJ54AHCU04W SN74AHCU04D ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 AHCU04 Samples SN74AHCU04DBR ACTIVE SSOP DB 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 HD04 Samples SN74AHCU04DR ACTIVE SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 AHCU04 Samples SN74AHCU04N ACTIVE PDIP N 14 25 RoHS & Green NIPDAU N / A for Pkg Type -40 to 85 SN74AHCU04N Samples SN74AHCU04NSR ACTIVE SO NS 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 AHCU04 Samples SN74AHCU04PW ACTIVE TSSOP PW 14 90 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 HD04 Samples SN74AHCU04PWR ACTIVE TSSOP PW 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 HD04 Samples SN74AHCU04PWRG4 ACTIVE TSSOP PW 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 HD04 Samples SNJ54AHCU04W ACTIVE CFP W 14 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-9680301QD A SNJ54AHCU04W (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of