SN74AUC1G66
www.ti.com .......................................................................................................................................................... SCES386L – MARCH 2002 – REVISED JULY 2009
SINGLE BILATERAL ANALOG SWITCH
FEATURES
1
• Available in the Texas Instruments NanoFree™
Package
• Wide VCC Range of 0.8 V to 2.7 V
• Sub-1-V Operable
• Low Power Consumption, 10-µA Max ICC
• High On-Off Output Voltage Ratio
• High Degree of Linearity
• High Speed – Max 0.2 ns (VCC = 1.8 V,
CL = 15 pF)
•
2
DBV PACKAGE
(TOP VIEW)
A
1
B
2
GND
3
5
4
•
•
Low On-State Impedance – Typically 9 Ω
(VCC = 2.3 V)
Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 200-V Machine Model (A115-A)
– 1000-V Charged-Device Model (C101)
DRY PACKAGE
(TOP VIEW)
DCK PACKAGE
(TOP VIEW)
A
VCC
1
B
2
GND
3
5
VCC
A
B
4
C
VCC
W
E
I
2
V5 NC
RE
1
GND P 3
6
4
C
YZP PACKAGE
(BOTTOM VIEW)
GND
3 4
B
2
A
1 5
C
VCC
C
See mechanical drawings for dimensions.
NC– No internal connection
DESCRIPTION/ORDERING INFORMATION
This single analog switch is operational at 0.8-V to 2.7-V VCC, but is designed specifically for 1.65-V to 1.95-V
VCC operation.
The SN74AUC1G66 can handle both analog and digital signals. The combined AC and DC signal has to be
between VCC and GND for it to be transmitted in either direction.
NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the
package.
Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for
analog-to-digital and digital-to-analog conversion systems.
1
2
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
NanoFree is a trademark of Texas Instruments.
UNLESS OTHERWISE NOTED this document contains
PRODUCTION DATA information current as of publication date.
Products conform to specifications per the terms of Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2002–2009, Texas Instruments Incorporated
SN74AUC1G66
SCES386L – MARCH 2002 – REVISED JULY 2009 .......................................................................................................................................................... www.ti.com
ORDERING INFORMATION
TA
PACKAGE
–40°C to 85°C
(1)
(2)
(3)
(1) (2)
ORDERABLE PART NUMBER
TOP-SIDE MARKING (3)
NanoFree™
WCSP (DSBGA) – YZP (Pb-free)
Reel of 3000
SN74AUC1G66YZPR
_ _ _U6_
SON – DRY
Reel of 5000
SN74AUC1G66DRYR
PREVIEW
SOT (SOT-23) – DBV
Reel of 3000
SN74AUC1G66DBVR
U66_
SOT (SC-70) – DCK
Reel of 3000
SN74AUC1G66DCKR
U6_
Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com.
DBV/DCK/DRY: The actual top-side marking has one additional character that designates the assembly/test site.
YZP: The actual top-side marking has three preceding characters to denote year, month, and sequence code, and one following
character to designate the assembly/test site.
FUNCTION TABLE
CONTROL
INPUT
(C)
SWITCH
L
OFF
H
ON
LOGIC DIAGRAM (POSITIVE LOGIC)
1
2
A
B
4
C
Absolute Maximum Ratings (1)
over operating free-air temperature range (unless otherwise noted)
MIN
MAX
VCC
Supply voltage range
–0.5
3.6
V
VI
Input voltage range (2)
–0.5
3.6
V
–0.5
VCC + 0.5
(2) (3)
UNIT
VI/O
Switch I/O voltage range
IIK
Control input clamp current
VI < 0
–50
mA
IIOK
I/O port diode current
VI/O < 0 or VI/O > VCC
±50
mA
IT
On-state switch current
VI/O = 0 to VCC
±50
mA
±100
mA
Continuous current through VCC or GND
θJA
Package thermal impedance (4)
Tstg
Storage temperature range
DBV package
206
DCK package
252
DRY package
234
YZP package
(1)
(2)
(3)
(4)
2
V
°C/W
123
–65
150
°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
All voltages are with respect to ground, unless otherwise specified.
The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
The package thermal impedance is calculated in accordance with JESD 51-7.
Submit Documentation Feedback
Copyright © 2002–2009, Texas Instruments Incorporated
Product Folder Link(s): SN74AUC1G66
SN74AUC1G66
www.ti.com .......................................................................................................................................................... SCES386L – MARCH 2002 – REVISED JULY 2009
Recommended Operating Conditions (1)
VCC
Supply voltage
VCC = 0.8 V
VIH
High-level input voltage
MIN
MAX
0.8
2.7
UNIT
V
VCC
VCC = 1.1 V to 1.95 V
0.65 × VCC
VCC = 2.3 V to 2.7 V
V
1.7
VCC = 0.8 V
0
VIL
Low-level input voltage
VCC = 1.1 V to 1.95 V
0.35 × VCC
VI/O
I/O port voltage
0
VCC
VI
Control input voltage
0
3.6
V
Δt/Δv
Input transition rise or fall rate
20
ns/V
TA
Operating free-air temperature
85
°C
VCC = 2.3 V to 2.7 V
(1)
V
0.7
–40
V
All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Electrical Characteristics
over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
VCC
MIN TYP (1)
MAX
ron
On-state switch resistance
ron(p)
Peak on resistance
VI = VCC to GND,
VC = VIH
(see Figure 1)
IS(off)
Off-state switch leakage current
VI = VCC and VO = GND, or
VI = GND and VO = VCC,
VC = VIL (see Figure 2)
2.7 V
IS(on)
On-state switch leakage current
VI = VCC or GND, VC = VIH, VO = Open
(see Figure 3)
2.7 V
II
Control input current
VI = VCC or GND
ICC
Supply current
VI = VCC or GND,
Cic
Control input capacitance
2.5 V
2
pF
Cio(off)
Switch input/output capacitance
2.5 V
3.5
pF
Cio(on)
Switch input/output capacitance
2.5 V
7
pF
(1)
IS = 4 mA
1.65 V
10
20
IS = 8 mA
2.3 V
9
15
IS = 4 mA
1.65 V
32
80
IS = 8 mA
2.3 V
15
20
UNIT
VI = VCC or GND,
VC = VIH
(see Figure 1)
±1
±0.1 (1)
±1
±0.1 (1)
0 to 2.7 V
IO = 0
0.8 V to 2.7 V
Ω
Ω
µA
µA
±5
µA
10
µA
All typical values are at TA = 25°C.
Switching Characteristics
over recommended operating free-air temperature range, CL = 15 pF (unless otherwise noted) (see Figure 4)
(1)
VCC = 1.2 V
± 0.1 V
VCC = 1.5 V
± 0.1 V
FROM
(INPUT)
TO
(OUTPUT)
VCC = 0.8 V
tpd (1)
A or B
B or A
0.9
ten
C
A or B
4.1
0.5
2.6
0.5
tdis
C
A or B
5
0.7
3.6
0.5
PARAMETER
TYP
MIN
MAX
MIN
MAX
0.3
VCC = 1.8 V
± 0.15 V
VCC = 2.5 V
± 0.2 V
TYP
0.1
ns
1.7
0.5
0.8
1.1
0.5
1
ns
2.6
0.5
1.7
2.9
0.5
2.2
ns
0.2
MAX
MIN
UNIT
MIN
0.2
MAX
The propagation delay is the calculated RC time constant of the typical on-state resistance of the switch and the specified load
capacitance, when driven by an ideal voltage source (zero output impedance).
Submit Documentation Feedback
Copyright © 2002–2009, Texas Instruments Incorporated
Product Folder Link(s): SN74AUC1G66
3
SN74AUC1G66
SCES386L – MARCH 2002 – REVISED JULY 2009 .......................................................................................................................................................... www.ti.com
Switching Characteristics
over recommended operating free-air temperature range, CL = 30 pF (unless otherwise noted) (see Figure 4)
FROM
(INPUT)
TO
(OUTPUT)
tpd (1)
A or B
B or A
ten
C
tdis
C
PARAMETER
(1)
4
VCC = 1.8 V
± 0.15 V
VCC = 2.5 V
± 0.2 V
MAX
MIN
UNIT
MIN
TYP
0.3
ns
A or B
0.5
1.4
2.3
0.8
1.4
ns
A or B
0.5
1.7
2.9
0.5
1.5
ns
0.3
MAX
The propagation delay is the calculated RC time constant of the typical on-state resistance of the switch and the specified load
capacitance, when driven by an ideal voltage source (zero output impedance).
Submit Documentation Feedback
Copyright © 2002–2009, Texas Instruments Incorporated
Product Folder Link(s): SN74AUC1G66
SN74AUC1G66
www.ti.com .......................................................................................................................................................... SCES386L – MARCH 2002 – REVISED JULY 2009
Analog Switch Characteristics
TA = 25°C
FROM
(INPUT)
PARAMETER
TO
(OUTPUT)
TEST CONDITIONS
CL = 50 pF, RL = 600 Ω,
fin = sine wave
(see Figure 5)
Frequency response (1)
(switch ON)
A or B
Crosstalk
(control input to signal output)
C
CL = 50 pF, RL = 600 Ω,
fin = 1 MHz (square wave)
(see Figure 6)
A or B
CL = 50 pF, RL = 600 Ω,
fin = 1 MHz (sine wave)
(see Figure 7)
Feedthrough attenuation
(switch OFF)
A or B
CL = 50 pF, RL = 10 kΩ,
fin = 1 kHz (sine wave)
(see Figure 8)
B or A
(1)
(2)
CL = 50 pF, RL = 10 kΩ,
fin = 10 kHz (sine wave)
(see Figure 8)
B or A
1.1 V
60
80
2.3 V
170
0.8 V
>500
1.1 V
>500
1.4 V
>500
1.65 V
>500
2.3 V
>500
0.8 V
9
1.1 V
14
1.4 V
15
1.65 V
16
2.3 V
20
0.8 V
–60
1.1 V
–60
1.4 V
–60
1.65 V
–60
2.3 V
–60
0.8 V
–55
1.1 V
–55
1.4 V
–55
1.65 V
–55
2.3 V
–55
0.8 V
7.5
1.1 V
0.16
1.4 V
0.04
1.65 V
0.03
2.3 V
0.02
0.8 V
4.2
Sine-wave distortion
A or B
60
120
B or A
CL = 5 pF, RL = 50 Ω,
fin = 1 MHz (sine wave)
(see Figure 7)
0.8 V
1.65 V
(2)
A or B
TYP
1.4 V
B or A
CL = 5 pF, RL = 50 Ω,
fin = sine wave
(see Figure 5)
VCC
1.1 V
0.2
1.4 V
0.03
1.65 V
0.02
2.3 V
0.02
UNIT
MHz
mV
dB
%
Adjust fin voltage to obtain 0 dBm at output. Increase fin frequency until dB meter reads –3 dB.
Adjust fin voltage to obtain 0 dBm at input.
Operating Characteristics
TA = 25°C
PARAMETER
Cpd
Power dissipation
capacitance
TEST
CONDITIONS
VCC = 0.8 V
VCC = 1.2 V
VCC = 1.5 V
VCC = 1.8 V
VCC = 2.5 V
TYP
TYP
TYP
TYP
TYP
f = 10 MHz
3
3
3
3
3
Submit Documentation Feedback
Copyright © 2002–2009, Texas Instruments Incorporated
Product Folder Link(s): SN74AUC1G66
UNIT
pF
5
SN74AUC1G66
SCES386L – MARCH 2002 – REVISED JULY 2009 .......................................................................................................................................................... www.ti.com
PARAMETER MEASUREMENT INFORMATION
VCC
VCC
B or A
A or B
VI = VCC or GND
VO
C
VC
VIH
(ON)
GND
IS
r on +
V
VI * VO
W
IS
VI - VO
Figure 1. On-State Resistance Test Circuit
VCC
VCC
VI
A
VIL
B or A
A or B
VO
C
VC
(OFF)
GND
Condition 1: VI = GND, VO = VCC
Condition 2: VI = VCC, VO = GND
Figure 2. Off-State Switch Leakage-Current Test Circuit
6
Submit Documentation Feedback
Copyright © 2002–2009, Texas Instruments Incorporated
Product Folder Link(s): SN74AUC1G66
SN74AUC1G66
www.ti.com .......................................................................................................................................................... SCES386L – MARCH 2002 – REVISED JULY 2009
PARAMETER MEASUREMENT INFORMATION (Continued)
VCC
VCC
VI = VCC or GND
A
B or A
A or B
VO
VO = Open
VIH
C
VC
(ON)
GND
Figure 3. On-State Leakage-Current Test Circuit
Submit Documentation Feedback
Copyright © 2002–2009, Texas Instruments Incorporated
Product Folder Link(s): SN74AUC1G66
7
SN74AUC1G66
SCES386L – MARCH 2002 – REVISED JULY 2009 .......................................................................................................................................................... www.ti.com
PARAMETER MEASUREMENT INFORMATION (Continued)
VLOAD
S1
RL
From Output
Under Test
Open
TEST
GND
CL
(see Note A)
S1
Open
VLOAD
tPLH/tPHL
tPLZ/tPZL
tPHZ/tPZH
RL
GND
LOAD CIRCUIT
INPUTS
VCC
VI
VCC
VCC
VCC
VCC
VCC
VCC
VCC
0.8 V
1.2 V ± 0.1 V
1.5 V ± 0.1 V
1.8 V ± 0.15 V
2.5 V ± 0.2 V
1.8 V ± 0.15 V
2.5 V ± 0.2 V
tr/tf
£2 ns
£2 ns
£2 ns
£2 ns
£2 ns
£2 ns
£2 ns
VM
VLOAD
CL
RL
VD
VCC/2
VCC/2
VCC/2
VCC/2
VCC/2
VCC/2
VCC/2
2 × VCC
2 × VCC
2 × VCC
2 × VCC
2 × VCC
2 × VCC
2 × VCC
15 pF
15 pF
15 pF
15 pF
15 pF
30 pF
30 pF
2 kW
2 kW
2 kW
2 kW
2 kW
1 kW
500 W
0.1 V
0.1 V
0.1 V
0.15 V
0.15 V
0.15 V
0.15 V
VI
Timing Input
VM
0V
tW
tsu
VI
Input
VM
VM
th
VI
Data Input
VM
VM
0V
0V
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
VOLTAGE WAVEFORMS
PULSE DURATION
VI
VM
Input
VM
0V
tPLH
VM
VOL
tPHL
0V
Output
Waveform 1
S1 at VLOAD
(see Note B)
tPLH
tPLZ
VLOAD/2
VM
tPZH
VOH
VM
VM
tPZL
VOH
Output
VM
tPHL
VM
Output
VI
Output
Control
VM
VOL
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
Output
Waveform 2
S1 at GND
(see Note B)
VOL + VD
VOL
tPHZ
VM
VOH – VD
VOH
»0 V
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
NOTES: A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR £ 10 MHz, ZO = 50 W,
Slew rate ³ 1 V/ns.
D. The outputs are measured one at a time, with one transition per measurement.
E. tPLZ and tPHZ are the same as tdis.
F. tPZL and tPZH are the same as ten.
G. tPLH and tPHL are the same as tpd.
Figure 4. Load Circuit and Voltage Waveforms
8
Submit Documentation Feedback
Copyright © 2002–2009, Texas Instruments Incorporated
Product Folder Link(s): SN74AUC1G66
SN74AUC1G66
www.ti.com .......................................................................................................................................................... SCES386L – MARCH 2002 – REVISED JULY 2009
PARAMETER MEASUREMENT INFORMATION (Continued)
VCC
VCC
0.1 µF
fin
50 Ω
B or A
A or B
VIH
VO
C
VC
RL
(ON)
GND
CL
VCC/2
RL/CL: 600 Ω/50 pF
RL/CL: 50 Ω/5 pF
Figure 5. Frequency Response (Switch ON)
VCC
VCC
VCC/2
Rin
600 Ω
A or B
B or A
VO
RL
600 Ω
C
VC
GND
CL
50 pF
VCC/2
50 Ω
Figure 6. Crosstalk (Control Input – Switch Output)
Submit Documentation Feedback
Copyright © 2002–2009, Texas Instruments Incorporated
Product Folder Link(s): SN74AUC1G66
9
SN74AUC1G66
SCES386L – MARCH 2002 – REVISED JULY 2009 .......................................................................................................................................................... www.ti.com
PARAMETER MEASUREMENT INFORMATION (Continued)
VCC
VCC
0.1 µF
RL
50 Ω
fin
B or A
A or B
VO
C
VC
VIL
CL
RL
(OFF)
GND
VCC/2
VCC/2
RL/CL: 600 Ω/50 pF
RL/CL: 50 Ω/5 pF
Figure 7. Feedthrough (Switch OFF)
VCC
VCC
10 µF
fin
600 Ω
VIH
10 µF
B or A
A or B
VO
RL
10 kΩ
C
VC
(ON)
GND
CL
50 pF
VCC/2
VCC = 0.8 V, VI = __ VP-P
VCC = 1.1 V, VI = __ VP-P
VCC = 1.4 V, VI = __ VP-P
VCC = 1.65 V, VI = 1.4 VP-P
VCC = 2.3 V, VI = 2.5 VP-P
Figure 8. Sine-Wave Distortion
10
Submit Documentation Feedback
Copyright © 2002–2009, Texas Instruments Incorporated
Product Folder Link(s): SN74AUC1G66
PACKAGE OPTION ADDENDUM
www.ti.com
14-Oct-2022
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
Samples
(4/5)
(6)
SN74AUC1G66DBVR
ACTIVE
SOT-23
DBV
5
3000
RoHS & Green
NIPDAU | SN
Level-1-260C-UNLIM
-40 to 85
(U66F, U66R)
Samples
SN74AUC1G66DCKR
ACTIVE
SC70
DCK
5
3000
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 85
(U65, U6F, U6R)
Samples
SN74AUC1G66YZPR
ACTIVE
DSBGA
YZP
5
3000
RoHS & Green
SNAGCU
Level-1-260C-UNLIM
-40 to 85
U6N
Samples
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of