Sample &
Buy
Product
Folder
Technical
Documents
Support &
Community
Tools &
Software
SN54HC14, SN74HC14
SCLS085J – DECEMBER 1982 – REVISED OCTOBER 2016
SNx4HC14 Hex Schmitt-Trigger Inverters
1 Features
3 Description
•
•
•
•
•
•
•
The SNx4HC14 are Schmitt-trigger devices that
contain six independent inverters. They perform the
Boolean function Y = A in positive logic.
1
Wide Operating Voltage Range of 2 V to 6 V
Outputs Can Drive Up to 10 LSTTL Loads
Low Power Consumption, 20-μA Max ICC
Typical tpd = 11 ns
±4-mA Output Drive at 5 V
Low Input Current of 1 μA Max
On Products Compliant to MIL-PRF-38535,
All Parameters Are Tested Unless Otherwise
Noted. On All Other Products, Production
Processing Does Not Necessarily Include Testing
of All Parameters.
2 Applications
•
•
•
•
•
•
•
Microwave Oven
Mice
Printers
AC Inverter Drives
UPS
AC Servo Drives
Other Motor Drives
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
SNJ54HC14J
CDIP (14)
7.62 mm x 19.94 mm
SNJ54HC14W
CFP (14)
7.11 mm x 9.11 mm
SNJ54HC14FK
LCCC (20)
8.89 mm x 8.89 mm
SN74HC14D
SOIC (14)
6.00 mm x 8.65 mm
SN74HC14DB
SSOP (14)
367.00 mm x 367.00 mm
SN74HC14N
PDIP (14)
7.94 mm x 10.35 mm
SN74HC14NS
SO (14)
7.80 mm x 10.20 mm
SN74HC14PW
TSSOP (14)
6.40 mm x 5.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Logic Diagram (Positive Logic)
A
Y
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
SN54HC14, SN74HC14
SCLS085J – DECEMBER 1982 – REVISED OCTOBER 2016
www.ti.com
Table of Contents
1
2
3
4
5
6
7
8
Features ..................................................................
Applications ...........................................................
Description .............................................................
Revision History.....................................................
Pin Configuration and Functions .........................
Specifications.........................................................
1
1
1
2
3
4
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
4
4
4
4
5
5
5
6
Absolute Maximum Ratings ......................................
ESD Ratings..............................................................
Recommended Operating Conditions.......................
Thermal Information ..................................................
Electrical Characteristics...........................................
Switching Characteristics ..........................................
Operating Characteristics..........................................
Typical Characteristics ..............................................
Parameter Measurement Information .................. 7
Detailed Description .............................................. 8
8.1 Overview ................................................................... 8
8.2 Functional Block Diagram ......................................... 8
8.3 Feature Description................................................... 8
8.4 Device Functional Modes.......................................... 8
9
Application and Implementation .......................... 9
9.1 Application Information.............................................. 9
9.2 Typical Application .................................................... 9
10 Power Supply Recommendations ..................... 10
11 Layout................................................................... 11
11.1 Layout Guidelines ................................................. 11
11.2 Layout Example .................................................... 11
12 Device and Documentation Support ................. 12
12.1
12.2
12.3
12.4
12.5
12.6
12.7
Documentation Support ........................................
Related Links ........................................................
Receiving Notification of Documentation Updates
Community Resources..........................................
Trademarks ...........................................................
Electrostatic Discharge Caution ............................
Glossary ................................................................
12
12
12
12
12
12
12
13 Mechanical, Packaging, and Orderable
Information ........................................................... 12
4 Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Revision I (February 2016) to Revision J
Page
•
Changed " Y = A" to "Y = A" throughout ................................................................................................................................ 1
•
Added The SNx4HC14 to Description section ....................................................................................................................... 1
•
Deleted Device Comparison Table section ............................................................................................................................ 1
•
Added Receiving Notification of Documentation Updates section ....................................................................................... 12
Changes from Revision H (September 2015) to Revision I
Page
•
Changed part number from SN54HC08 to SN54HC14 in Switching Characteristics table.................................................... 5
•
Changed part number from SN74HC08 to SN74HC14 in Switching Characteristics table.................................................... 5
Changes from Revision G (January 2014) to Revision H
Page
•
Added Applications ................................................................................................................................................................. 1
•
Added Military Disclaimer to Features list. ............................................................................................................................. 1
•
Added Pin Configuration and Functions section, ESD Ratings table, Feature Description section, Device Functional
Modes, Application and Implementation section, Power Supply Recommendations section, Layout section, Device
and Documentation Support section, and Mechanical, Packaging, and Orderable Information section .............................. 1
Changes from Revision F (December 2010) to Revision G
•
2
Page
Updated document to new TI data sheet format - no specification changes. ........................................................................ 1
Submit Documentation Feedback
Copyright © 1982–2016, Texas Instruments Incorporated
Product Folder Links: SN54HC14 SN74HC14
SN54HC14, SN74HC14
www.ti.com
SCLS085J – DECEMBER 1982 – REVISED OCTOBER 2016
5 Pin Configuration and Functions
SN54HC14 J or W Package
SN74HC14 D, DB, N, NS, or PW Package
14-Pin CDIP, CFP, SOIC, SSOP, PDIP, SO, or TSSOP
Top View
14
2
13
3
12
4
11
5
10
6
7
9
8
1Y
1A
NC
VCC
6A
1
VCC
6A
6Y
5A
5Y
4A
4Y
2A
NC
2Y
NC
3A
4
3 2 1 20 19
18
5
17
6
16
7
15
8
14
9 10 11 12 13
6Y
NC
5A
NC
5Y
3Y
GND
NC
4Y
4A
1A
1Y
2A
2Y
3A
3Y
GND
SN54HC14 FK Package
20-Pin LCCC
Top View
Pin Functions
PIN
CDIP, CFP,
SOIC, SSOP,
PDIP, SO,
TSSOP
LCCC
1A
1
2
I
Channel 1 input
1Y
2
3
O
Channel 1 output
2A
3
4
I
Channel 2 input
2Y
4
6
O
Channel 2 output
3A
5
8
I
Channel 3 input
3Y
6
9
O
Channel 3 output
GND
7
10
—
Ground
4Y
8
12
O
Channel 4 output
4A
9
13
I
Channel 4 input
5Y
10
14
O
Channel 5 output
5A
11
16
I
Channel 5 input
6Y
12
18
O
Channel 6 output
6A
13
19
I
Channel 6 input
VCC
14
20
—
Power supply
—
No internal connection
NAME
I/O
DESCRIPTION
1
5
NC (1)
—
7
11
15
17
(1)
NC – No internal connection
Copyright © 1982–2016, Texas Instruments Incorporated
Product Folder Links: SN54HC14 SN74HC14
Submit Documentation Feedback
3
SN54HC14, SN74HC14
SCLS085J – DECEMBER 1982 – REVISED OCTOBER 2016
www.ti.com
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) (1)
VCC
Supply voltage
(2)
MIN
MAX
UNIT
–0.5
7
V
IIK
Input clamp current
VI < 0 or VI > VCC
±20
mA
IOK
Output clamp current (2)
VO < 0
±20
mA
IO
Continuous output current
VO = 0 to VCC
±25
mA
mA
Continuous current through VCC or GND
±50
Tj
Junction temperature
150
Tstg
Storage temperature
(1)
(2)
–65
°C
150
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
6.2 ESD Ratings
VALUE
V(ESD)
(1)
(2)
Electrostatic discharge
Human body model (HBM), per ANSI/ESDA/JEDEC JS-001
(1)
UNIT
±2000
Charged-device model (CDM), per JEDEC specification JESD22-C101 (2)
V
±1500
JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
6.3 Recommended Operating Conditions
See note (1).
SN54HC14
SN74HC14
UNIT
MIN
NOM
MAX
MIN
NOM
MAX
5
6
2
5
6
V
V
VCC
Supply voltage
2
VI
Input voltage
0
VCC
0
VCC
VO
Output voltage
0
VCC
0
VCC
V
TA
Operating free-air temperature
–55
125
–40
85
°C
(1)
All unused inputs of the device must be held at VCC or GND to ensure proper device operation. See Implications of Slow or Floating
CMOS Inputs, SCBA004.
6.4 Thermal Information
SNx4HC14
THERMAL METRIC (1)
RθJA
(1)
4
Junction-to-ambient thermal resistance
D (SOIC)
DB (SSOP)
N (PDIP)
NS (SO)
PW (TSSOP)
14 PINS
14 PINS
14 PINS
14 PINS
14 PINS
86
96
80
76
113
UNIT
°C/W
For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application
report.
Submit Documentation Feedback
Copyright © 1982–2016, Texas Instruments Incorporated
Product Folder Links: SN54HC14 SN74HC14
SN54HC14, SN74HC14
www.ti.com
SCLS085J – DECEMBER 1982 – REVISED OCTOBER 2016
6.5 Electrical Characteristics
over operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
VCC
VT+
VT−
VT+ − VT−
IOH = –20 μA
VOH
VI = VIH or VIL
IOH = –4 mA
IOH = –5.2 mA
IOL = 20 μA
VOL
VI = VIH or VIL
IOL = 4 mA
IOL = 5.2 mA
II
VI = VCC or 0
ICC
VI = VCC or 0,
IO = 0
TA = 25°C
MIN
TYP
MAX
SN74HC14
MIN
MIN
MAX
2V
0.7
1.2
1.5
0.7
1.5
0.7
1.5
1.55
2.5
3.15
1.55
3.15
1.55
3.15
6V
2.1
3.3
4.2
2.1
4.2
2.1
4.2
2V
0.3
0.6
1
0.3
1
0.3
1
4.5 V
0.9
1.6
2.45
0.9
2.45
0.9
2.45
6V
1.2
2
3.2
1.2
3.2
1.2
3.2
2V
0.2
0.6
1.2
0.2
1.2
0.2
1.2
4.5 V
0.4
0.9
2.1
0.4
2.1
0.4
2.1
6V
0.5
1.3
2.5
0.5
2.5
0.5
2.5
2V
1.9
1.998
1.9
1.9
4.5 V
4.4
4.499
4.4
4.4
6V
5.9
5.999
5.9
5.9
4.5 V
3.98
4.3
3.7
3.84
6V
5.48
5.8
5.2
UNIT
MAX
4.5 V
V
V
V
V
5.34
2V
0.002
0.1
0.1
0.1
4.5 V
0.001
0.1
0.1
0.1
6V
0.001
0.1
0.1
0.1
4.5 V
0.17
0.26
0.4
0.33
6V
0.15
0.26
0.4
0.33
6V
±0.1
±100
±1000
±1000
nA
2
40
20
μA
10
10
10
pF
6V
Ci
SN54HC14
2 V to 6 V
3
V
6.6 Switching Characteristics
over operating free-air temperature range, CL = 50 pF (unless otherwise noted) (see Figure 3)
PARAMETER
tpd
FROM
(INPUT)
A
tt
TO
(OUTPUT)
Y
Y
VCC
TA = 25°C
MIN
SN54HC14
MIN
SN74HC14
TYP
MAX
MAX
MIN
2V
55
125
190
155
4.5 V
12
25
38
31
6V
11
21
22
26
UNIT
MAX
2V
38
75
110
95
4.5 V
8
15
22
19
6V
6
13
19
16
ns
ns
6.7 Operating Characteristics
TA = 25°C
Cpd
PARAMETER
TEST CONDITIONS
TYP
UNIT
Power dissipation capacitance per inverter
No load
20
pF
Copyright © 1982–2016, Texas Instruments Incorporated
Product Folder Links: SN54HC14 SN74HC14
Submit Documentation Feedback
5
SN54HC14, SN74HC14
SCLS085J – DECEMBER 1982 – REVISED OCTOBER 2016
www.ti.com
6.8 Typical Characteristics
14.5
70
14
60
50
TPD (ns)
TPD (ns)
13.5
13
12.5
10
0
-50
0
50
Temperature
100
Submit Documentation Feedback
150
0
2
D001
Figure 1. TPD vs Temperature at 4.5 V, 25°C
6
30
20
12
11.5
-100
40
4
VCC
6
8
D002
Figure 2. TPD vs VCC at 25°C
Copyright © 1982–2016, Texas Instruments Incorporated
Product Folder Links: SN54HC14 SN74HC14
SN54HC14, SN74HC14
www.ti.com
SCLS085J – DECEMBER 1982 – REVISED OCTOBER 2016
7 Parameter Measurement Information
From Output
Under Test
Test
Point
Input
90%
In-Phase
Output
90%
tPHL
tPLH
LOAD CIRCUIT
50%
10%
50%
0V
CL= 50 pF
(see Note A)
Input
VCC
50%
tr
0V
90%
90%
VOH
50%
10%
tr
VCC
50%
10%
50%
10%
tPLH
tPHL
Out-of-Phase
Output
90%
VOL
tf
50%
10%
tf
50%
10%
90%
tf
VOH
VOL
tr
VOLTAGE WAVEFORMS
PROPAGATION DELAY AND OUTPUT TRANSITION TIMES
VOLTAGE WAVEFORMS
INPUT RISE AND FALL TIMES
Figure 3. Load Circuit and Voltage Waveforms
Copyright © 1982–2016, Texas Instruments Incorporated
Product Folder Links: SN54HC14 SN74HC14
Submit Documentation Feedback
7
SN54HC14, SN74HC14
SCLS085J – DECEMBER 1982 – REVISED OCTOBER 2016
www.ti.com
8 Detailed Description
8.1 Overview
These Schmitt-trigger devices contain six independent inverters. They perform the Boolean function Y = A in
positive logic.
Schmitt-trigger inputs are designed to provide a minimum separation between positive and negative switching
thresholds. This allows for noisy or slow inputs that would cause problems such as oscillation or excessive
current draw with normal CMOS inputs.
8.2 Functional Block Diagram
A
Y
Figure 4. Logic Diagram (Positive Logic)
8.3 Feature Description
The wide operating range of the device allows it to be used in a variety of systems that use different logic levels.
The outputs can drive up to 10 LSTTL loads each. The device has very low power consumption, with 20-μA Max
ICC. Typical propagation delay is also low at 11 ns. The balanced drive outputs can source or sink 4 mA at 5-V
VCC. The input leakage current is 1 μA Max.
8.4 Device Functional Modes
Table 1 lists the functional modes of the SNx4HC14.
Table 1. Function Table (Each Inverter)
INPUTS
A
8
Submit Documentation Feedback
OUTPUT
Y
H
L
L
H
Copyright © 1982–2016, Texas Instruments Incorporated
Product Folder Links: SN54HC14 SN74HC14
SN54HC14, SN74HC14
www.ti.com
SCLS085J – DECEMBER 1982 – REVISED OCTOBER 2016
9 Application and Implementation
NOTE
Information in the following applications sections is not part of the TI component
specification, and TI does not warrant its accuracy or completeness. TI’s customers are
responsible for determining suitability of components for their purposes. Customers should
validate and test their design implementation to confirm system functionality.
9.1 Application Information
The SNx4HC14 are Schmitt-trigger input CMOS devices that can be used for a multitude of inverting buffer type
functions. The application shown in Figure 5 takes advantage of the Schmitt-trigger inputs to produce a delay for
a logic output.
9.2 Typical Application
INPUT 1A
1Y
R1
2A
2Y
OUTPUT
C1
Figure 5. Simplified Application Schematic
9.2.1 Design Requirements
This device uses CMOS technology. Take care to avoid bus contention because it can drive currents that would
exceed maximum limits. Parallel output drive can create fast edges into light loads so consider routing and load
conditions to prevent ringing.
9.2.2 Detailed Design Procedure
This circuit is designed around an RC network that produces a slow input to the second inverter. The RC time
constant, τ, is calculated from: τ = R×C
The delay time for this circuit is between 1.2τ and 0.42τ. The delay is consistent for each device, but because the
switching threshold is only guaranteed between a minimum and maximum value, the output pulse length varies
between the devices. These values were calculated by using the minimum and maximum guaranteed VT+ values.
The resistor value should be chosen such that the maximum current from and to the SNx4HC14 is 4 mA.
• Recommended input conditions:
– Schmitt-trigger inputs allow for slow inputs.
– Specified high and low levels. See (VIH and VIL) in Recommended Operating Conditions.
• Recommended output conditions:
– Load currents should not exceed 4 mA per output.
Copyright © 1982–2016, Texas Instruments Incorporated
Product Folder Links: SN54HC14 SN74HC14
Submit Documentation Feedback
9
SN54HC14, SN74HC14
SCLS085J – DECEMBER 1982 – REVISED OCTOBER 2016
www.ti.com
Typical Application (continued)
9.2.3 Application Curve
5.0
4.5
4.0
3.0
2.5
VT+ Typical
VT+
Voltage (V)
3.5
2.0
1.5
1.0
Max Delay Time = 1.202
VC
Min Delay Time = 0.422
VOUT
0.5
0.0
t0
t0 + 2
t0 + 22
t0 + 32
t0 + 42
t0 + 52
Time
Figure 6. Ideal Capacitor Voltage and Output Voltage With Positive Switching Threshold Range
Representation
10 Power Supply Recommendations
The power supply can be any voltage between the minimum and maximum supply voltage rating located in the
Recommended Operating Conditions. Each VCC terminal should have a good bypass capacitor to prevent power
disturbance. For devices with a single supply, TI recommends a 0.1-µF capacitor. If there are multiple VCC
terminals, then TI recommends a 0.01-µF or 0.022-µF capacitor for each power terminal. Multiple bypass
capacitors can be paralleled to reject different frequencies of noise. Frequencies of 0.1 μF and 1 μF are
commonly used in parallel. The bypass capacitor should be installed as close as possible to the power terminal
for best results.
10
Submit Documentation Feedback
Copyright © 1982–2016, Texas Instruments Incorporated
Product Folder Links: SN54HC14 SN74HC14
SN54HC14, SN74HC14
www.ti.com
SCLS085J – DECEMBER 1982 – REVISED OCTOBER 2016
11 Layout
11.1 Layout Guidelines
When using multiple bit logic devices, inputs should never float. In many cases, functions or parts of functions of
digital logic devices are unused, for example, when only two inputs of a triple-input AND gate are used or only
three of the four buffer gates are used. Such input pins should not be left unconnected because the undefined
voltages at the outside connections result in undefined operational states. All unused inputs of digital logic
devices must be connected to a high or low bias to prevent them from floating. The logic level that should be
applied to any particular unused input depends on the function of the device. Generally they will be tied to GND
or VCC whichever makes more sense or is more convenient. Floating outputs is generally acceptable, unless the
part is a transceiver.
11.2 Layout Example
Figure 7. Layout Recommendation
Copyright © 1982–2016, Texas Instruments Incorporated
Product Folder Links: SN54HC14 SN74HC14
Submit Documentation Feedback
11
SN54HC14, SN74HC14
SCLS085J – DECEMBER 1982 – REVISED OCTOBER 2016
www.ti.com
12 Device and Documentation Support
12.1 Documentation Support
12.1.1 Related Documentation
For related documentation, see the following:
Implications of Slow or Floating CMOS Inputs, SCBA004
12.2 Related Links
The table below lists quick access links. Categories include technical documents, support and community
resources, tools and software, and quick access to sample or buy.
Table 2. Related Links
PARTS
PRODUCT FOLDER
SAMPLE & BUY
TECHNICAL
DOCUMENTS
TOOLS &
SOFTWARE
SUPPORT &
COMMUNITY
SN54HC05
Click here
Click here
Click here
Click here
Click here
SN74HC05
Click here
Click here
Click here
Click here
Click here
12.3 Receiving Notification of Documentation Updates
To receive notification of documentation updates, navigate to the device product folder on ti.com. In the upper
right corner, click on Alert me to register and receive a weekly digest of any product information that has
changed. For change details, review the revision history included in any revised document.
12.4 Community Resources
The following links connect to TI community resources. Linked contents are provided "AS IS" by the respective
contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of
Use.
TI E2E™ Online Community TI's Engineer-to-Engineer (E2E) Community. Created to foster collaboration
among engineers. At e2e.ti.com, you can ask questions, share knowledge, explore ideas and help
solve problems with fellow engineers.
Design Support TI's Design Support Quickly find helpful E2E forums along with design support tools and
contact information for technical support.
12.5 Trademarks
E2E is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
12.6 Electrostatic Discharge Caution
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
12.7 Glossary
SLYZ022 — TI Glossary.
This glossary lists and explains terms, acronyms, and definitions.
13 Mechanical, Packaging, and Orderable Information
The following pages include mechanical, packaging, and orderable information. This information is the most
current data available for the designated devices. This data is subject to change without notice and revision of
this document. For browser-based versions of this data sheet, refer to the left-hand navigation.
12
Submit Documentation Feedback
Copyright © 1982–2016, Texas Instruments Incorporated
Product Folder Links: SN54HC14 SN74HC14
PACKAGE OPTION ADDENDUM
www.ti.com
24-Aug-2018
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
5962-8409101VCA
ACTIVE
CDIP
J
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
5962-8409101VC
A
SNV54HC14J
5962-8409101VDA
ACTIVE
CFP
W
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
5962-8409101VD
A
SNV54HC14W
84091012A
ACTIVE
LCCC
FK
20
1
TBD
POST-PLATE
N / A for Pkg Type
-55 to 125
84091012A
SNJ54HC
14FK
8409101CA
ACTIVE
CDIP
J
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
8409101CA
SNJ54HC14J
8409101DA
ACTIVE
CFP
W
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
8409101DA
SNJ54HC14W
JM38510/65702BCA
ACTIVE
CDIP
J
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
JM38510/
65702BCA
JM38510/65702BDA
ACTIVE
CFP
W
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
JM38510/
65702BDA
M38510/65702BCA
ACTIVE
CDIP
J
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
JM38510/
65702BCA
M38510/65702BDA
ACTIVE
CFP
W
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
JM38510/
65702BDA
SN54HC14J
ACTIVE
CDIP
J
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
SN54HC14J
SN74HC14D
ACTIVE
SOIC
D
14
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14DBR
ACTIVE
SSOP
DB
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14DE4
ACTIVE
SOIC
D
14
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14DG4
ACTIVE
SOIC
D
14
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14DR
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU | CU SN
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14DRE4
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
24-Aug-2018
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
SN74HC14DRG3
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14DRG4
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14DT
ACTIVE
SOIC
D
14
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14DTG4
ACTIVE
SOIC
D
14
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14N
ACTIVE
PDIP
N
14
25
Green (RoHS
& no Sb/Br)
CU NIPDAU | CU SN
N / A for Pkg Type
-40 to 85
SN74HC14N
SN74HC14NE4
ACTIVE
PDIP
N
14
25
Green (RoHS
& no Sb/Br)
CU NIPDAU
N / A for Pkg Type
-40 to 85
SN74HC14N
SN74HC14NSR
ACTIVE
SO
NS
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14NSRE4
ACTIVE
SO
NS
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14PW
ACTIVE
TSSOP
PW
14
90
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14PWE4
ACTIVE
TSSOP
PW
14
90
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14PWG4
ACTIVE
TSSOP
PW
14
90
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14PWR
ACTIVE
TSSOP
PW
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU | CU SN
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14PWRE4
ACTIVE
TSSOP
PW
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14PWRG4
ACTIVE
TSSOP
PW
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14PWT
ACTIVE
TSSOP
PW
14
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SN74HC14PWTG4
ACTIVE
TSSOP
PW
14
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
HC14
SNJ54HC14FK
ACTIVE
LCCC
FK
20
1
TBD
POST-PLATE
N / A for Pkg Type
-55 to 125
84091012A
SNJ54HC
14FK
SNJ54HC14J
ACTIVE
CDIP
J
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
8409101CA
Addendum-Page 2
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
24-Aug-2018
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
TBD
A42
N / A for Pkg Type
Op Temp (°C)
Device Marking
(4/5)
SNJ54HC14J
SNJ54HC14W
ACTIVE
CFP
W
14
1
-55 to 125
8409101DA
SNJ54HC14W
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of
工商网监
湘ICP备2023018690号
