SN74LVC2GU04
www.ti.com
SCES197N – APRIL 1999 – REVISED DECEMBER 2013
Dual Inverter Gate
Check for Samples: SN74LVC2GU04
FEATURES
DESCRIPTION
•
This dual inverter is designed for 1.65-V to 5.5-V VCC
operation.
1
2
•
•
•
•
•
•
•
•
•
•
•
•
Available in the Texas Instruments NanoFree™
Package
Supports 5-V VCC Operation
Inputs Accept Voltages to 5.5 V
Max tpd of 3.7 ns at 3.3 V
Low Power Consumption, 10-µA Max ICC
±24-mA Output Drive at 3.3 V
Typical VOLP (Output Ground Bounce)
2 V at VCC = 3.3 V, TA = 25°C
Ioff Supports Live Insertion, Partial-PowerDown Mode, and Back-Drive Protection
Can Be Used as a Down Translator to
Translate Inputs From a Max of 5.5 V Down to
the VCC Level
Unbuffered Outputs
Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 200-V Machine Model (A115-A)
– 1000-V Charged-Device Model (C101)
DBV PACKAGE
(TOP VIEW)
1A
1
6
The SN74LVC2GU04 device contains two inverters
with unbuffered outputs and performs the Boolean
function Y = A.
NanoFree™ package technology is a major
breakthrough in IC packaging concepts, using the die
as the package.
DCK PACKAGE
(TOP VIEW)
1Y
GND
2
5
VCC
2A
3
4
2Y
YZP PACKAGE
(BOTTOM VIEW)
1A
1
6
1Y
GND
2
5
VCC
2A
3
4
2Y
2A
3 4
GND
2 5
1A
1 6
2Y
VCC
1Y
See mechanical drawings for dimensions.
1
2
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
NanoFree is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1999–2013, Texas Instruments Incorporated
SN74LVC2GU04
SCES197N – APRIL 1999 – REVISED DECEMBER 2013
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Function Table
(Each Inverter)
INPUT
A
OUTPUT
Y
H
L
L
H
Logic Diagram (Positive Logic)
1A
2A
1
6
3
4
1Y
2Y
Absolute Maximum Ratings (1)
over operating free-air temperature range (unless otherwise noted)
VCC
MIN
MAX
Supply voltage range
–0.5
6.5
UNIT
V
(2)
–0.5
6.5
V
–0.5
VCC + 0.5
VI
Input voltage range
VO
Voltage range applied to any output in the high or low state (2) (3)
IIK
Input clamp current
VI < 0
–50
mA
IOK
Output clamp current
VO < 0
–50
mA
IO
Continuous output current
±50
mA
±100
mA
Continuous current through VCC or GND
θJA
Tstg
(1)
(2)
(3)
(4)
2
Package thermal impedance (4)
DBV package
165
DCK package
259
YZP package
123
Storage temperature range
–65
150
V
°C/W
°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
The value of VCC is provided in the recommended operating conditions table.
The package thermal impedance is calculated in accordance with JESD 51-7.
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: SN74LVC2GU04
SN74LVC2GU04
www.ti.com
SCES197N – APRIL 1999 – REVISED DECEMBER 2013
Recommended Operating Conditions (1)
VCC
Supply voltage
VIH
High-level input voltage
IO = –100 µA
VIL
Low-level input voltage
IO = 100 µA
VI
Input voltage
VO
Output voltage
MIN
MAX
1.65
5.5
0.75 × VCC
V
V
0
5.5
V
0
VCC
V
–4
VCC = 2.3 V
High-level output current
–8
–16
VCC = 3 V
–32
VCC = 1.65 V
4
VCC = 2.3 V
Low-level output current
8
16
VCC = 3 V
32
Operating free-air temperature
(1)
mA
24
VCC = 4.5 V
TA
mA
–24
VCC = 4.5 V
IOL
V
0.25 × VCC
VCC = 1.65 V
IOH
UNIT
–40
125
°C
All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Electrical Characteristics
over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
IOH = –100 µA
VOH
VIL = 0 V
VCC –
0.1
VCC –
0.1
1.2
1.2
2.3 V
1.9
1.9
2.4
2.4
2.3
2.3
3V
MAX
IOL = 100 µA
1.65 V to 5.5 V
0.1
0.1
IOL = 4 mA
1.65 V
0.45
0.45
IOL = 8 mA
2.3 V
0.3
0.3
0.4
0.4
0.55
0.55
0.55
0.55
VI = 5.5 V or GND, IO = 0
CI
VI = VCC or GND
3.8
3V
4.5 V
VI = 5.5 V or GND
UNIT
V
4.5 V
IOL = 16 mA
3.8
TYP (1)
IOH = –32 mA
ICC
(1)
MIN
1.65 V
IOL = 32 mA
A inputs
MAX
IOH = –8 mA
IOL = 24 mA
II
–40°C to 125°C
TYP (1)
IOH = –4 mA
IOH = –24 mA
VIH = VCC
MIN
1.65 V to 5.5 V
IOH = –16 mA
VOL
–40°C to 85°C
VCC
V
0 to 5.5 V
±5
±5
µA
1.65 V to 5.5 V
10
10
µA
3.3 V
7
pF
All typical values are at VCC = 3.3 V, TA = 25°C.
Switching Characteristics
over recommended operating free-air temperature range (unless otherwise noted) (see Figure 1)
SN74LVC2GU04
–40°C to 85°C
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
tpd
A
Y
VCC = 1.8 V
± 0.15 V
VCC = 2.5 V
± 0.2 V
VCC = 3.3 V
± 0.3 V
VCC = 5 V
± 0.5 V
UNIT
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
1.2
5.5
1
4
1.1
3.7
1
3
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: SN74LVC2GU04
ns
3
SN74LVC2GU04
SCES197N – APRIL 1999 – REVISED DECEMBER 2013
www.ti.com
Switching Characteristics
over recommended operating free-air temperature range (unless otherwise noted) (see Figure 1)
SN74LVC2GU04
–40°C to 125°C
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
tpd
A
Y
VCC = 1.8 V
± 0.15 V
VCC = 2.5 V
± 0.2 V
VCC = 3.3 V
± 0.3 V
VCC = 5 V
± 0.5 V
UNIT
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
1.2
6.3
1
4.5
1.1
4.2
1
3.5
ns
Operating Characteristics
TA = 25°C
Cpd
4
PARAMETER
TEST CONDITIONS
Power dissipation capacitance
f = 10 MHz
VCC = 1.8 V
VCC = 2.5 V
VCC = 3.3 V
VCC = 5 V
TYP
TYP
TYP
TYP
7
7
8
23
Submit Documentation Feedback
UNIT
pF
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: SN74LVC2GU04
SN74LVC2GU04
www.ti.com
SCES197N – APRIL 1999 – REVISED DECEMBER 2013
Parameter Measurement Information
VLOAD
S1
RL
From Output
Under Test
Open
TEST
GND
CL
(see Note A)
S1
Open
VLOAD
tPLH/tPHL
tPLZ/tPZL
tPHZ/tPZH
RL
GND
LOAD CIRCUIT
INPUTS
VCC
1.8 V ± 0.15 V
2.5 V ± 0.2 V
3.3 V ± 0.3 V
5 V ± 0.5 V
VI
tr/tf
VCC
VCC
3V
VCC
£2 ns
£2 ns
£2.5 ns
£2.5 ns
VM
VLOAD
CL
RL
VD
VCC/2
VCC/2
1.5 V
VCC/2
2 × VCC
2 × VCC
6V
2 × VCC
30 pF
30 pF
50 pF
50 pF
1 kW
500 W
500 W
500 W
0.15 V
0.15 V
0.3 V
0.3 V
VI
Timing Input
VM
0V
tW
tsu
VI
Input
VM
VM
th
VI
Data Input
VM
VM
0V
0V
VOLTAGE WAVEFORMS
PULSE DURATION
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
VI
VM
Input
VM
0V
tPLH
VOH
Output
VM
VOL
tPHL
VM
VM
0V
tPLZ
Output
Waveform 1
S1 at VLOAD
(see Note B)
tPLH
VLOAD/2
VM
tPZH
VOH
Output
VM
tPZL
tPHL
VM
VI
Output
Control
VM
VOL
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
Output
Waveform 2
S1 at GND
(see Note B)
VOL + VD
VOL
tPHZ
VM
VOH – VD
VOH
»0 V
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
NOTES: A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR £ 10 MHz, ZO = 50 W.
D. The outputs are measured one at a time, with one transition per measurement.
E. tPLZ and tPHZ are the same as tdis.
F. tPZL and tPZH are the same as ten.
G. tPLH and tPHL are the same as tpd.
H. All parameters and waveforms are not applicable to all devices.
Figure 1. Load Circuit and Voltage Waveforms
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: SN74LVC2GU04
5
SN74LVC2GU04
SCES197N – APRIL 1999 – REVISED DECEMBER 2013
www.ti.com
REVISION HISTORY
Changes from Revision M (February 2007) to Revision N
Page
•
Updated document to new TI data sheet format. ................................................................................................................. 1
•
Removed ordering information. ............................................................................................................................................ 1
•
Updated Features. ................................................................................................................................................................ 1
•
Added ESD warning. ............................................................................................................................................................ 2
•
Updated operating temperature range. ................................................................................................................................. 3
6
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: SN74LVC2GU04
PACKAGE OPTION ADDENDUM
www.ti.com
10-Dec-2020
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
(4/5)
(6)
74LVC2GU04DBVRG4
ACTIVE
SOT-23
DBV
6
3000
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
(CU45, CU4R)
74LVC2GU04DCKRG4
ACTIVE
SC70
DCK
6
3000
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
CD5
74LVC2GU04DCKTG4
ACTIVE
SC70
DCK
6
250
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
CD5
SN74LVC2GU04DBVR
ACTIVE
SOT-23
DBV
6
3000
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
(CU45, CU4R)
SN74LVC2GU04DBVT
ACTIVE
SOT-23
DBV
6
250
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
(CU45, CU4R)
SN74LVC2GU04DCKR
ACTIVE
SC70
DCK
6
3000
RoHS & Green
NIPDAU | SN
Level-1-260C-UNLIM
-40 to 125
(CD5, CDF, CDJ, CD
K, CDR)
SN74LVC2GU04DCKT
ACTIVE
SC70
DCK
6
250
RoHS & Green
NIPDAU | SN
Level-1-260C-UNLIM
-40 to 125
(CD5, CDF, CDJ, CD
K, CDR)
SN74LVC2GU04YZPR
ACTIVE
DSBGA
YZP
6
3000
RoHS & Green
SNAGCU
Level-1-260C-UNLIM
-40 to 85
CDN
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of
很抱歉,暂时无法提供与“SN74LVC2GU04YZPR”相匹配的价格&库存,您可以联系我们找货
免费人工找货