TMDSRM48USB

Communication and Peripheral Pin Access: Several key peripheral pins of the MCU are accessible on the USB Stick via two rows of test points. The USB Stick also features a CAN transceiver on the DCAN1 communication interface and is accessible via a connector on the board. The communication and peripheral pins accessible on the USB Stick are shown in the diagram below. Quick Start Guide: Hercules™ RM48 USB Stick Development Kit The Hercules™ USB Stick is ideal for evaluating and starting development with the RM48x series of safety microcontrollers. It is powered by a PC’s USB port and features on-board XDS100v2 JTAG emulation along with access to several key peripheral pins. This quick start guide assumes that the user will be using the Code Composer Studio™ IDE for development. Hercules USB Stick Key Features: -  -  -  -  -  -  -  -  -  -  IMPORTANT: All applications run on the Development Stick should be limited to 100MHz HCLK Speed More information about Hercules RM4 MCUs can be found at http://www.ti.com/rm4 The platform bar, Hercules and Code Composer Studio are trademarks of Texas Instruments. All other trademarks are the property of their respective owners. © 2013 Texas Instruments Incorporated. SPNU591 337p BGA Hercules MCU On Board USB XDS100v2 JTAG On Board SCI to USB Serial 6 White N2HET LEDs 2 Tri-Color (RGB) N2HET LEDs Ambient Light Sensor Temperature Sensor CAN Transceiver 3 Axis Accelerometer PORRST and RST Buttons IMPORTANT: Code Composer Studio™ IDE must be installed before the USB Development Stick is plugged into the PC All applications run on the Development Stick should be limited to 100MHz HCLK Speed NOTE: The battery saver must be removed from the included flashlight before use. Quick Start Guide: Hercules Microcontroller USB Stick 1 A) Install Code Composer Studio IDE from the included DVD IMPORTANT: Code Composer Studio must be installed before the Hercules Development Kit software 3 Run the Hercules Demo software The software will be available in: → All Programs → Texas Instruments → Hercules → B) Install the Hercules Development Kit software from the included DVD Hercules Safety MCU Demos NOTE: The Hercules Development Kit software supports Windows® 7 and XP(SP3) operating systems 2 4 Watch the Hercules ‘How-To’ tutorial videos at: http://www.ti.com/herculestraining Plug in the USB Stick into a USB port on the PC. The PC will recognize the board as an XDS100v2 JTAG Emulator and a USB Serial Port. USB mini-B IMPORTANT: Code Composer Studio must be installed before the USB Stick is plugged into the PC + DC Power Input NOTE: Pressing the PORRST button on the board may be required before programming the MCU’s flash memory Technical support for Hercules MCUs can be found at www.ti.com/hercules-support 5 Create your own Hercules application using HALCoGen and Code Composer Studio: Additional example software for Hercules MCUs can be found in the HALCoGen application under ‘Help → Help Topics → Examples’ Or in the ‘Examples’ section of the Code Composer Studio TI Resource Explorer. IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2013, Texas Instruments Incorporated